TE CONNECTIVITY 767121-8

STEP-Z Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) STEP-Z Interconnection System (Continued) 25.00 [.984] Plugs Position T25 28.60 25.50 [1.126] [1.004] Position A2 Position A1 A Optional Pick-Up Cap ± 0.25 25.95 ± .010 [1.022 ] ± 0.12 24.65 ± .005 [.970 ] Ø 0.76 0.55 Solder Balls Ref. [.030] [.022] Contacts In 2.00 These Rows Are [.079] Tied Together 18.00 25.50 Ref. (Commoned) [.709] [1.004] 9.00 [.354] Ø 0.60–0.55 1.00 8x [.024–.022] 0.65 [.039] 2 Plcs. 73x [.026] 1.30 Stencil Connector Outline 36x [.051] Onto Board C B A Ref. Recommended PC Board Layout Dimensions Part Numbers No. of Plating Pos.* ABC With Pick & Place Cap  SnPb 2-1761614-5 38.20 31.85 15.93 200 1.504 1.254 .627 Pb-free 7-1761614-5  SnPb 2-1761616-5 53.75 47.45 23.725 296 2.116 1.868 .934 Pb-free 7-1761616-5 * Signal contacts only, ground contacts not included. Tray packaged Part Numbers shown. Contact Tyco Electronics Engineering for Tape and Reel packaged versions. Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant;  Indicates “5 of 6 compliant” (lead in solderable interface only). 13 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Introduction to the MICTOR Interconnection System Page_Head (Continued) (0.64 [.025] Centerline) Product Facts
76 dedicated signal lines per linear inch
Surface mount family designed for parallel and right-angle board-to-board, flex-to-board and cable-to- board configurations
0.64 [.025] centerline contact spacing
Redundant interfaces on mated contacts
Fifteen mated stack heights available ranging from 6.60 [.260] to 31.90 [1.256]
Infrared and forced air convection compatible housing materials
Designed for 50-ohm systems
Connector housings polarized for correct mating
Built-in connector-to-board retention feature
Connector can be separated by peeling from one end to the other The MICTOR connector provided. The MICTOR options are available to
Various packaging styles family is based on the connector family is avail- meet the needs of various can be made available for microstrip concept of two able in 0.64 [.025] center- applications. automated assembly rows of signal contacts lines and in sizes ranging The housing material is (tape and reel, tubes) divided by a center power from 38 signal positions to a liquid crystal polymer, ground plane. MICTOR 266 positions (in increments
Recognized under the compatible with infrared connectors are mother- of 38 positions). There is a Component Program of and forced air convection board and daughtercard discrete ground bus every Underwriter operations. compatible and include 12.7 [.50] of the connector R Laboratories Inc. The connector system uses designs for cable-to-board length, which can be File No. E28476 the solid ground bus applications. assigned to either power or between the rows of signals ground in any combination. Various mated heights are to provide low crosstalk and available for parallel board- Redundant interfaces on excellent high-speed signal to-board systems. Custom every signal line provide characteristics. stacking heights can be added reliability. Two plating 14 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) M MI IC CT TO OR R C Co on nn ne ec ct to or r C Cr ro os ss s S Se ec ct ti io on n Compliant Center ground bus for SMT solder improved signal integrity lead design and matched impedance Redundant points of contact for high reliability Connectors are shown at point where signal contact first touch each other. Connectors are designed to be fully mated when the two “Z” datums meet. Green = Receptacle housing Red = Plug housing Blue = Signal contacts Brown = Ground bus contacts 15 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma ag te e_ riH al ea ad nd(CP on etr infu oerdm ) ance Specifications, MICTOR Connectors Material Material Specifications Housing — Liquid crystal polymer, black Contacts — High reliability copper alloy Ground Bus — Phosphor bronze Finish (Gold Plating) Contacts and Ground Bus — Duplex plated 0.00076 [.000030] min. gold in mating area, 0.00381 [.000150] min. tin-lead on leads, with entire contact and ground bus underplated 0.00178 [.000070] min. nickel Finish (Palladium-Nickel Plating) Contacts and Ground Bus — Duplex plated 0.000013 [.000005] min. gold over 0.00076 [.000030] min. palladium-nickel in mating area, 0.00381 [.000150] min. tin-lead on leads, with entire contact and ground bus underplated 0.00178 [.000070] min. nickel Finish (Lead-Free Plating) Contacts and Ground Bus — 0.00076 [.000030] min. gold on contact area, 0.00381-0.00635 [.000150-.000250] matte tin per ASTM B 545 on leads, all over 0.00177-0.00445 [.000070-.000175] nickel. Or 0.00013 [.000005] min. gold over, 0.00076 [.000030] min. palladium nickel on contact area, 0.00381-0.00635 [.000150-.000250] matte tin per ASTM B 545 on leads, all over 0.00191-0.00445 [.000075-.000175] nickel. Ratings Performance Specifications Voltage — 30 vac Current — Signal; rated 1.0 Amps, fully derated 0.5 Amps Ground; rated 11.5 Amps, fully derated 7.6 Amps Temperature — -55°C to +125°C Electrical Characteristics Characteristic Impedance — 50±5 ohms at 1 ns Termination Resistance —∆R 10 milliohms max.; Specification 109-6-1 Insulation Resistance — 10,000 megohms min.; Specification 109-208-1 Dielectric Withstanding Voltage — 500 vac at sea level; Specification 109-29-1 Mechanical Characteristics Solderability — Solderable area shall have a 95% min. solder coverage; Specification 109-11-1 Vibration (Random) — No discontinuities of 1 μs or longer duration; Specification 109-21-5 Physical Shock — No discontinuities of 1 μs or longer duration; Specification 109-26-1 Durability (Tested to) — Mate and unmate samples at a rate of 600 cycles max. per hour. 25 cycles, gold plating; 500 cycles, palladium-nickel plating; Specification 109-27 Contact Retention — 1 lb min.; Specification 109-30 Mating Force — 152 oz max. per 1/2 inch of connector (1 module). Each module equals 38 signal contacts and 1 ground bus; Specification 109-42 Unmating Force — 19 oz min. per 1/2 inch of connector (1 module). Each module equals 38 signal contacts and 1 ground bus; Specification 109-42 Environmental Characteristics Thermal Shock — Subject mated samples to 5 cycles between -55°C and +125°C; Specification 109-22 Humidity - Temperature Cycling — Subject mated samples to 10 cycles between +25°C and +65°C at 95% RH; Specification 109-23-3, Condition B Temperature Cycling — Subject mated samples to 1024 cycles between -40°C and +60°C at 2 hours per cycle; Specification 109-75-1 Temperature Life — Subject mated samples to temperature life at +118°C for 792 hours; Specification 109-43 Mixed Flowing Gas — Subject mated samples to environmental class II for 14 days; Specification 109-85-2 16 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) M MI IC CT TO OR R S St ta ac ck k H He ei ig gh ht t C Co om mb bi in na at ti io on ns s 30 μ Gold and Palladium 12.57 [.495] Plug Nickel Plated Vertical (Pages 25 and 26) 11.00 [.430] Plug 9.00 [.354] Plug (Pages 23 and 24) Connectors (Pages 21 and 22) 6.60 [.260] Plug (Pages 19 and 20) 12.57 11.00 9.00 [.495] [.430] 6.60 [.354] [.260] Standard Receptacle Standard Receptacle Standard Receptacle Standard Receptacle (Pages 36 and 37) (Pages 36 and 37) (Pages 36 and 37) (Pages 36 and 37) 12.57 [.495] Plug (Pages 25 and 26) 11.00 [.430] Plug 18.75 [.738] Plug (Pages 23 and 24) 9.00 [.354] Plug (Page 29) (Pages 21 and 22) 6.60 [.260] Plug (Pages 19 and 20) 21.60 20.00 [.850] 18.75 18.00 [.785] 15.60 [.738] [.709] [.615] Raised Receptacle Raised Receptacle Standard Receptacle Raised Receptacle Raised Receptacle (Pages 38 and 39) (Pages 38 and 39) (Pages 36 and 37) (Pages 38 and 39) (Pages 38 and 39) 22.86 [.900] Plug* (Pages 32 and 33) 20.00 [.785] Plug* 18.75 [.738] Plug* (Pages 30 and 31) 17.96 [.707] Plug (Page 29) (Pages 27 and 28) 22.86 [.900] Plug (Pages 32 and 33) 31.90 29.00 27.80 [1.255] 27.00 [1.143] [1.093] [1.062] 22.86 [.900] Standard Receptacle Raised Receptacle Raised Receptacle Raised Receptacle Raised Receptacle (Pages 36 and 37) (Pages 38 and 39) (Pages 38 and 39) (Pages 38 and 39) (Pages 38 and 39) *This connector not available in Palladium Nickel. 17 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma Ig Ce T_ OH ReR ad ig(hCto-n Atin nu gelde) (Straddle Mount) Combinations 30 μ Gold & Palladium Nickel Connections Vertical Receptacle with Vertical Plug with Right-Angle Plug Right-Angle Receptacle Right-angle versions are Engineering to review their designed for paddlecard applications as the potential type applications. It is highly for tolerancing issues recommended that cus- and/or issues of solder joint tomers who are considering integrity can be highly right-angle applications application specific. contact Tyco Electronics 18 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) M MI IC CT TO OR R V Ve er rt ti ic ca al l P Pl lu ug gs s 6.60 [.260] Stacking Height* ± 0.20 A [± .008] + 0.00 – 0.05 Related Product Data B + .000 ± 0.03 5.28 [ ] – .002 ± .001 Material and Finish — page 16 [.208 ] Performance Characteristics — page 16 Mating Receptacles — pages 36-41 Technical Documents — page 81 Position No. 1 Indicator 18 Spaces at ± 0.20 ± .008 0.64 [.025 ] ± 0.20 ± .008 D Spaces at = 11.43 [.450 ] ± 0.20 12.70 *6.60 [.260] stack height when ± 0.20 ± .008 [.500 ] = E C mated to vertical receptacle; [± .008] 15.62 [.615] stack height when mated to vertical receptacle ± 0.28 6.53 (extended height). ± .011 [.257 ] Ground Bus ± 0.23 6.38 Housing ± .009 [.251 ] Contact 8.72 Standard Barbless Ø 1.94 F Ref. [.343] Ground Bus Leads [.077] Max. ± 0.05 0.43 ± .002 [.017 ] C Ref. 6.35 1.27 4 Spaces at [.250] [.050] 2.54 [.100] Position No. 2 Pad = 10.16 [.400] 3.53 [.139] ± 0.05 Ø 0.81 0.64 ± .002 Orientation Hole [.032 ] [.025] (See Note) Hole Position No. 1 R 0.13 [.005] PC Board Hold Down Required or In This Area For Connectors 0.13 [.005] x 45° of 190 Positions and Larger. Size, Shape & Location at Customer’s Discretion. Recommended PC Board Layout (Viewed from Connector Side) Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications, the orientation hole must be 2.00±0.03 [.079±.001]. 19 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma Ig Ce T_ OH ReV ae dr(tC ic oa ntlinP ueld u)gs (Continued) 6.60 [.260] Stacking Height (Continued) Part Numbers Platings Barbed G/B Leads Barbless G/B Leads Dimensions No. of Solder T&R T&R Pos. A BC D E F Contact Tail Vacuum Caps Vacuum Caps Tube Tube With Without With Without 1.35 [.053] Gold 767007-8
767111-8
767111-1
767116-1
767118-1
767118-8
2.72 [.107] SnPb 767056-1
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 767117-1
767119-1
767119-8
25.40 22.81 11.43 38 0— 1.000 .898 .450 1.35 [.053] Gold 5767007-8
5767111-8
5767111-1
5767116-1
5767118-1
5767118-8
2.72 [.107] Pb-free 5767056-1
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 5767117-1
5767119-1
5767119-8
1.35 [.053] Gold 767007-9
767111-9
767111-2
767116-2
767118-2
767118-9
2.72 [.107] SnPb 767056-2
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 767117-2
767119-2
767119-9
38.10 31.70 24.13 12.70 76 1 1.500 1.248 .950 .500 1.35 [.053] Gold 5767007-9
5767111-95767111-25767116-2
5767118-2
5767118-9
2.72 [.107] Pb-free 5767056-2
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 5767117-2
5767119-2
5767119-9
1.35 [.053] Gold 1-767007-0
1-767111-0
767111-3
767116-3
767118-3
1-767118-0
2.72 [.107] SnPb 767056-3
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 767117-3
767119-3
1-767119-0
50.80 48.21 36.83 25.40 114 2 2.000 1.898 1.450 1.000 1.35 [.053] Gold 1-5767007-0 1-5767111-0 5767111-3
5767116-3
5767118-3
1-5767118-0
2.72 [.107] Pb-free 5767056-3
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 5767117-3
5767119-3
1-5767119-0
1.35 [.053] Gold 1-767007-1
1-767111-1
767111-4
767116-4
767118-4
1-767118-1
2.72 [.107] SnPb 767056-4
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 767117-4
767119-4
1-767119-1
63.50 60.91 49.53 38.10 152 3 2.500 2.398 1.950 1.500 1.35 [.053] Gold 1-5767007-1 1-5767111-1 5767111-4
5767116-4
5767118-4
1-5767118-1
2.72 [.107] Pb-free 5767056-4
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 5767117-4
5767119-4
1-5767119-1
1.35 [.053] Gold 1-767007-2
1-767111-2
767111-5
767116-5
767118-5
1-767118-2
2.72 [.107] SnPb 767056-5
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 767117-5
767119-5
1-767119-2
76.20 73.61 62.23 50.80 190 4 3.000 2.898 2.450 2.000 1.35 [.053] Gold 1-5767007-2 1-5767111-2 5767111-5
5767116-5
5767118-5
1-5767118-2
2.72 [.107] Pb-free 5767056-5
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 5767117-5
5767119-5
1-5767119-2
1.35 [.053] Gold 1-767007-3
— . — . 767116-6
— . — . 2.72 [.107] SnPb 767056-6
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 767117-6
— . — . 88.90 86.31 74.93 63.50 228 5 3.500 3.398 2.950 2.500 1.35 [.053] Gold 1-5767007-3
— . — . 5767116-6
— . — . 2.72 [.107] Pb-free 5767056-6
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 5767117-6
— . — . 1.35 [.053] Gold 1-767007-4
— . — . 767116-7
— . — . 2.72 [.107] SnPb 767056-7
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 767117-7
— . — . 101.60 99.01 87.63 76.20 266 6 4.000 3.898 3.450 3.000 1.35 [.053] Gold 1-5767007-4
— . — . 5767116-7
— . — . 2.72 [.107] Pb-free 5767056-7
— . — . — . — . — . PdNi 2.64 [.104] — . — . — . 5767117-7
— . — . Notes: 1. Contact Product Engineering regarding options not present in this table. 2. T&R vacuum caps are placed on some connectors to allow them to be picked up with robotic placement equipment that uses vacuum pick-up nozzles. Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant;
Indicates “5 of 6 compliant” (lead in solderable interface only). 20 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma Ig Ce T_ OH ReV ae dr(tC ic oa ntlinP ueld u)gs (Continued) 9.00 [.354] Stacking Height* ± 0.20 A [± .008] + 0.00 – 0.05 Related Product Data B + .000 ± 0.03 5.28 [ ] – .002 ± .001 Material and Finish — page 16 [.208 ] Performance Characteristics — page 16 Mating Receptacles — pages 36-41 Position No. 1 Indicator Technical Documents — page 81 18 Spaces at ± 0.20 ± .008 0.64 [.025 ] ± 0.20 ± .008 D Spaces at = 11.43 [.450 ] * 9.00 [.354] stack height when ± 0.20 12.70 mated to vertical receptacle; ± 0.20 ± .008 [.500 ] = E C 18.00 [.709] stack height when [± .008] mated to vertical receptacle (extended height). ± 0.28 8.86 ± .011 [.349 ] Ground Bus ± 0.20 Housing 8.71 ± .008 [.343 ] Contact 8.33 Standard Ground Ø 1.94 F Ref. [.328] Bus Leads [.077] Max. ± 0.05 0.43 ± .002 [.017 ] C Ref. 6.35 1.27 4 Spaces at [.250] [.050] 2.54 [.100] Position No. 2 Pad = 10.16 [.400] 3.53 [.139] ± 0.05 Ø 0.81 0.64 ± .002 Orientation Hole [.032 ] [.025] (See Note) Hole Position No. 1 R 0.13 [.005] PC Board Hold Down Required or In This Area For Connectors 0.13 [.005] x 45° of 190 Positions and Larger. Size, Shape & Location at Customer’s Discretion. Recommended PC Board Layout (Viewed from Connector Side) Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications, the orientation hole must be 2.00±0.03 [.079±.001]. 21 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma Ig Ce T_ OH ReV ae dr(tC ic oa ntlinP ueld u)gs (Continued) 9.00 [.354] Stacking Height (Continued) Part Numbers Platings Dimensions No. of Barbed G/B Leads Solder Pos. A BC D E F Contact Tail Tube 1.52 [.060] Gold 767139-1
SnPb 2.74 [.108] PdNi 767140-1
25.40 22.81 11.43 38 0 — 1.000 .898 .450 1.52 [.060] Gold 5767139-1 Pb-free 2.74 [.108] PdNi 5767140-1 1.52 [.060] Gold 767139-2
SnPb 2.74 [.108] PdNi 767140-2
38.10 31.70 24.13 12.70 76 1 1.500 1.248 .950 .500 1.52 [.060] Gold 5767139-2 Pb-free 2.74 [.108] PdNi 5767140-2 1.52 [.060] Gold 767139-3
SnPb 2.74 [.108] PdNi 767140-3
50.80 48.21 36.83 25.40 114 2 2.000 1.898 1.450 1.000 1.52 [.060] Gold 5767139-3 Pb-free 2.74 [.108] PdNi 5767140-3 1.52 [.060] Gold 767139-4
SnPb 2.74 [.108] PdNi 767140-4
63.50 60.91 49.53 38.10 152 3 2.500 2.398 1.950 1.500 1.52 [.060] Gold 5767139-4 Pb-free 2.74 [.108] PdNi 5767140-4 1.52 [.060] Gold 767139-5
SnPb 2.74 [.108] PdNi 767140-5
76.20 73.61 62.23 50.80 190 4 3.000 2.898 2.450 2.000 1.52 [.060] Gold 5767139-5 Pb-free 2.74 [.108] PdNi 5767140-5 1.52 [.060] Gold 767139-6
SnPb 2.74 [.108] PdNi 767140-6
88.90 86.31 74.93 63.50 228 5 3.500 3.398 2.950 2.500 1.52 [.060] Gold 5767139-6 Pb-free 2.74 [.108] PdNi 5767140-6 1.52 [.060] Gold 767139-7
SnPb 2.74 [.108] PdNi 767140-7
101.60 99.01 87.63 76.20 266 6 4.000 3.898 3.450 3.000 1.52 [.060] Gold 5767139-7 Pb-free 2.74 [.108] PdNi 5767140-7 Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant;
Indicates “5 of 6 compliant” (lead in solderable interface only). 22 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma Ig Ce T_ OH ReV ae dr(tC ic oa ntlinP ueld u)gs (Continued) 11.00 [.430] Stacking Height* ± 0.20 A [± .008] + 0.00 – 0.05 Related Product Data B + .000 ± 0.03 5.28 [ ] – .002 ± .001 Material and Finish — page 16 [.208 ] Performance Characteristics — page 16 Mating Receptacles — pages 36-41 Position No. 1 Indicator Technical Documents — page 81 18 Spaces at ± 0.20 ± .008 0.64 [.025 ] ± 0.20 ± .008 D Spaces at = 11.43 [.450 ] ± 0.20 12.70 * 11.00 [.430] stack height when ± 0.20 ± .008 [.500 ] = E C [± .008] mated to vertical receptacle; ± 0.28 10.79 19.94 [.785] stack height when ± .011 [.425 ] mated to vertical receptacle Ground Bus (extended height). Housing ± 0.20 10.64 ± .008 [.419 ] Contact 8.72 Standard Ground Ø 1.94 F Ref. [.343] Bus Leads [.077] Max. ± 0.05 0.43 ± .002 [.017 ] C Ref. 6.35 1.27 4 Spaces at [.250] [.050] 2.54 [.100] Position No. 2 Pad = 10.16 [.400] 3.53 [.139] ± 0.05 Ø 0.81 0.64 ± .002 Orientation Hole [.032 ] [.025] (See Note) Hole Position No. 1 R 0.13 [.005] PC Board Hold Down Required or In This Area For Connectors 0.13 [.005] x 45° of 190 Positions and Larger. Size, Shape & Location at Customer’s Discretion. Recommended PC Board Layout (Viewed from Connector Side) Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications, the orientation hole must be 2.00±0.03 [.079±.001]. 23 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma Ig Ce T_ OH ReV ae dr(tC ic oa ntlinP ueld u)gs (Continued) 11.00 [.430] Stacking Height (Continued) Part Numbers Platings Barbed G/B Leads Barbless G/B Leads Dimensions No. of Solder T&R T&R Pos. A BC D E F Contact Tail Vacuum Caps Vacuum Caps Tube Tube With Without With 1.52 [.060] Gold 767003-9
767123-8
767123-1
—— SnPb 2.64 [.104] PdNi 767087-1
— —— — 25.40 22.81 11.43 38 0 — 1.000 .898 .450 1.52 [.060] Gold 5767003-9
5767123-8
5767123-1
—— Pb-free 2.64 [.104] PdNi 5767087-1
—— —— 1.52 [.060] Gold 1-767003-0
767123-9
767123-2
— — SnPb 2.64 [.104] PdNi 767087-2
— —— — 38.10 31.70 24.13 12.70 76 1 1.500 1.248 .950 .500 1.52 [.060] Gold 1-5767003-0
5767123-9
5767123-2
—— Pb-free 2.64 [.104] PdNi 5767087-2
—— —— 1.52 [.060] Gold 1-767003-1
1-767123-0
767123-3
1-767182-3
1-767183-0
SnPb 2.64 [.104] PdNi 767087-3
—— —— 50.80 48.21 36.83 25.40 114 2 2.000 1.898 1.450 1.000 1.52 [.060] Gold 1-5767003-1
1-5767123-0
5767123-3
1-5767182-3
1-5767183-0
Pb-free 2.64 [.104] PdNi 5767087-3
— —— — 1.52 [.060] Gold 767003-8
— —— — SnPb 2.64 [.104] PdNi 767087-4
—— —— 63.50 60.91 49.53 38.10 152 3 2.500 2.398 1.950 1.500 1.52 [.060] Gold 5767003-8
—— —— Pb-free 2.64 [.104] PdNi 5767087-4
—— —— 1.52 [(.060] Gold 1-767003-2
1-767123-2
767123-5
—— SnPb 2.64 [.104] PdNi 767087-5
—— —— 76.20 73.61 62.23 50.80 190 4 3.000 2.898 2.450 2.000 1.52 [.060] Gold 1-5767003-2
1-5767123-2
5767123-5
—— Pb-free 2.64 [.104] PdNi 5767087-5
—— —— 1.52 [.060] Gold 1-767003-3
—— —— SnPb 2.64 [.104] PdNi 767087-6
—— —— 88.90 86.31 74.93 63.50 228 5 3.500 3.398 2.950 2.500 1.52 [.060] Gold 1-5767003-3
—— —— Pb-free 2.64 [.104] PdNi 5767087-6
—— —— 1.52 [.060] Gold 1-767003-4
—— —— SnPb 2.64 [.104] PdNi 767087-7
—— —— 101.60 99.01 87.63 76.20 266 6 4.000 3.898 3.450 3.000 1.52 [.060] Gold 1-5767003-4
—— —— Pb-free 2.64 [.104] PdNi 5767087-7
—— —— Note: Contact Product Engineering regarding options not present in this table. Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant;
Indicates “5 of 6 compliant” (lead in solderable interface only). 24 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma Ig Ce T_ OH ReV ae dr(tC ic oa ntlinP ueld u)gs (Continued) 12.57 [.495] Stacking Height* ± 0.20 A [± .008] + 0.00 – 0.05 Related Product Data B + .000 ± 0.03 5.28 [ ] – .002 ± .001 Material and Finish — page 16 [.208 ] Performance Characteristics — page 16 Mating Receptacles — pages 36-41 Position No. 1 Indicator Technical Documents — page 81 18 Spaces at ± 0.20 ± .008 0.64 [.025 ] ± 0.20 ± .008 D Spaces at = 11.43 [.450 ] ± 0.20 12.70 * 12.57 [.495] stack height when ± 0.20 ± .008 [.500 ] = E C [± .008] ± 0.28 mated to vertical receptacle; 12.45 ± .011 [.490 ] 21.59 [.850] stack height when Ground Bus mated to vertical receptacle (extended height). ± 0.20 12.29 Housing ± .008 [.484 ] Contact 8.72 Standard Ground Ø 1.94 F Ref. [.343] Bus Leads [.077] Max. ± 0.05 0.43 ± .002 [.017 ] C Ref. 6.35 1.27 4 Spaces at [.250] [.050] 2.54 [.100] Position No. 2 Pad = 10.16 [.400] 3.53 [.139] ± 0.05 Ø 0.81 0.64 ± .002 Orientation Hole [.032 ] [.025] (See Note) Hole Position No. 1 R 0.13 [.005] PC Board Hold Down Required or In This Area For Connectors 0.13 [.005] x 45° of 190 Positions and Larger. Size, Shape & Location at Customer’s Discretion. Recommended PC Board Layout (Viewed from Connector Side) Note: For standard applications, the orientation hole must be 2.39±0.05 [.094±.002]; For slip-fit applications, the orientation hole must be 2.00±0.03 [.079±.001]. 25 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma Ig Ce T_ OH ReV ae dr(tC ic oa ntlinP ueld u)gs (Continued) 12.57 [.495] Stacking Height (Continued) Part Numbers Platings Barbed G/B Leads Barbless G/B Leads Dimensions No. of Solder T&R T&R Pos. A BC D E F Contact Tail Vacuum Caps Vacuum Caps Tube Tube With Without With Without 1.52 [.060] Gold 767005-8
767149-1
767149-8
767120-1
767121-1
767121-8
SnPb 2.64 [.104] PdNi 767057-1
— . — . 767082-1
— . — . 25.40 22.81 11.43 38 0 — 1.000 .898 .450 1.52 [.060] Gold 5767005-8
5767149-1
5767149-8
5767120-1
5767121-1
5767121-8
Pb-free 2.64 [.104] PdNi 5767057-1
— . — . 5767082-1
— . — . 1.52 [.060] Gold 767005-9
767149-2
767149-9
767120-2
767121-2
767121-9
SnPb 2.64 [.104] PdNi 767057-2
— . — . 767082-2
— . — . 38.10 31.70 24.13 12.70 76 1 1.500 1.248 .950 .500 1.52 [.060] Gold 5767005-9
5767149-2
5767149-9
5767120-2
5767121-2
5767121-9
Pb-free 2.64 [.104] PdNi 5767057-2
— . — . 5767082-2
— . — . 1.52 [.060] Gold 1-767005-0
767149-3
1-767149-0
767120-3
767121-3
1-767121-0
SnPb 2.64 [.104] PdNi 767057-3
— . — . 767082-3
— . — . 50.80 48.21 36.83 25.40 114 2 2.000 1.898 1.450 1.000 1.52 [.060] Gold 1-5767005-0
5767149-3
1-5767149-0
5767120-3
5767121-3
1-5767121-0
Pb-free 2.64 [.104] PdNi 5767057-3
— . — . 5767082-3
— . — . 1.52 [.060] Gold 1-767005-1
767149-4
1-767149-1
767120-4
767121-4
1-767121-1
SnPb 2.64 [.104] PdNi 767057-4
— . — . 767082-4
767127-4
1-767127-1
63.50 60.91 49.53 38.10 152 3 2.500 2.398 1.950 1.500 1.52 [.060] Gold 1-5767005-1
5767149-4
1-5767149-1
5767120-4
5767121-4
1-5767121-1
Pb-free 2.64 [.104] PdNi 5767057-4
— . — . 5767082-4
5767127-4
1-5767127-1
1.52 [.060] Gold 1-767005-2
767149-5
1-767149-2
767120-5
— . — . SnPb 2.64 [.104] PdNi 767057-5
— . — . 767082-5
767127-5
1-767121-2
76.20 73.61 62.23 50.80 190 4 3.000 2.898 2.450 2.000 1.52 [.060] Gold 1-5767005-2
5767149-5
1-5767149-2
5767120-5
— . — . Pb-free 2.64 [.104] PdNi 5767057-5
— . — . 5767082-5
5767127-5
1-5767121-2
1.52 [.060] Gold 1-767005-3
— . — . 767120-6
— . — . SnPb 2.64 [.104] PdNi 767057-6
— . — . 767082-6
— . — . 88.90 86.31 74.93 63.50 228 5 3.500 3.398 2.950 2.500 1.52 [.060] Gold 1-5767005-3
— . — . 5767120-6
— . — . Pb-free 2.64 [.104] PdNi 5767057-6
— . — . 5767082-6
— . — . 1.52 [.060] Gold 1-767005-4
— . — . 767120-7
— . — . SnPb 2.64 [.104] PdNi 767057-7
— . 1-767151-4
767082-7
— . — . 101.60 99.01 87.63 76.20 266 6 4.000 3.898 3.450 3.000 1.52 [.060] Gold 1-5767005-4
— . — . 5767120-7
— . — . Pb-free 2.64 [.104] PdNi 5767057-7
— . 1-5767151-4
5767082-7
— . — . Note: Contact Product Engineering regarding options not present in this table. Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant;
Indicates “5 of 6 compliant” (lead in solderable interface only). 26 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma Ig Ce T_ OH ReV ae dr(tC ic oa ntlinP ueld u)gs (Continued) 17.96 [.707] Stacking Height* ± 0.20 A [± .008] + 0.00 ± 0.03 – 0.05 5.28 Related Product Data B + .000 ± .001 [.208 ] [ ] – .002 Material and Finish — page 16 Performance Characteristics — 8.13 page 16 [.320] Mating Receptacles — pages 36-41 Technical Documents — page 81 18 Spaces at Position No. 1 Indicator ± 0.15 ± .006 0.64 [.025 ] D Spaces at ± 0.15 ± .006 = 11.43 [.450 ] ± 0.15 12.70 * 17.96 [.707] stack height when ± .006 ± 0.15 [.500 ] = E C mated to vertical receptacle; [± .006] 27.00 [1.062] stack height when Ground Bus mated to vertical receptacle (extended height). Plug Housing ± 0.28 17.75 14.71 ± .011 [.699 ] [.579] Extension Ref. Housing Contact Standard Ground 1.32 1.35 Bus Leads [.052] [.053] ± 0.05 0.43 ± .002 [.017 ] C Ref. 6.35 1.27 4 Spaces at [.250] [.050] 2.54 [.100] Position No. 2 Pad = 10.16 [.400] 3.53 [.139] ± 0.05 Ø 0.81 0.64 ± 0.05 2.39 ± .002 [.032 ] [.025] ± .002 [.094 ] Hole Orientation Hole Position No. 1 R 0.13 [.005] PC Board Hold Down Required or In This Area For Connectors 0.13 [.005] x 45° of 190 Positions and Larger. Size, Shape & Location at Customer’s Discretion. Recommended PC Board Layout (Connector Side of Board Shown) Notes: 1. For dual application, the orientation hole must be 1.98±0.03 [.078±.001]. See Application Specification 114-11004 for details. 2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics. 27 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma Ig Ce T_ OH ReV ae dr(tC ic oa ntlinP ueld u)gs (Continued) 17.96 [.707] Stacking Height (Continued) Dimensions No. of Plating Part Numbers Pos. ABCD E SnPb 767025-1
25.40 22.81 11.43 0.00 38 0 1.000 .898 .450 .000 Pb-free 5767025-1 SnPb 767025-2
38.10 35.51 24.13 12.70 76 1 1.500 1.398 .950 .500 Pb-free 5767025-2 SnPb 767025-3
50.80 48.21 36.83 25.40 114 2 2.000 1.898 1.450 1.000 Pb-free 5767025-3 SnPb 767025-4
63.50 60.91 49.53 38.10 152 3 2.500 2.398 1.950 1.500 Pb-free 5767025-4 SnPb 767025-5
76.20 73.61 62.23 50.80 190 4 3.000 2.898 2.450 2.000 Pb-free 5767025-5 SnPb 767025-6
88.90 86.31 74.93 63.50 228 5 3.500 3.398 2.950 2.500 Pb-free 5767025-6 SnPb 767025-7
101.60 99.00 87.63 76.20 266 6 4.000 3.898 3.450 3.000 Pb-free 5767025-7 Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant;
Indicates “5 of 6 compliant” (lead in solderable interface only). 28 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) P Ma Ig Ce T_ OH ReV ae dr(tC ic oa ntlinP ueld u)gs (Continued) 18.75 [.738] Stacking Height* ± 0.20 A [± .008] + 0.00 ± 0.03 – 0.05 5.28 Related Product Data B + .000 ± .001 [.208 ] [] – .002 Material and Finish — page 16 Performance Characteristics — 8.13 page 16 [.320] Mating Receptacles — pages 36-41 Technical Documents — page 81 18 Spaces at Position No. 1 Indicator ± 0.15 ± .006 0.64 [.025 ] D Spaces at ± 0.15 ± .006 = 11.43 [.450 ] ± 0.15 12.70 * 18.75 [.738] stack height when ± .006 ± 0.15 [.500 ] = E C mated to vertical receptacle; [± .006] 27.80 [1.093] stack height when Ground Bus mated to vertical receptacle (extended height). Plug Housing ± 0.28 18.47 15.49 ± .011 [.727 ] [.610] Extension Ref. Housing Contact 8.72 Standard Ground 1.45 1.32 [.343] Bus Leads [.057] [.052] Max. ± 0.05 0.43 ± .002 [.017 ] C Ref. 6.35 1.27 4 Spaces at [.250] [.050] 2.54 [.100] Position No. 2 Pad = 10.16 [.400] 3.53 [.139] ± 0.05 Ø 0.81 0.64 ± 0.05 2.39 ± .002 [.032 ] [.025] ± .002 [.094 ] Hole Orientation Hole Position No. 1 R 0.13 [.005] PC Board Hold Down Required or In This Area For Connectors 0.13 [.005] x 45° of 190 Positions and Larger. Size, Shape & Location at Customer’s Discretion. Recommended PC Board Layout (Connector Side of Board Shown) Dimensions No. of Plating Part Numbers Pos. ABCD E
SnPb 767042-1 25.40 22.81 11.43 0.00 38 0 1.000 .898 .450 .000 Pb-free 5767042-1
SnPb 767042-2 38.10 35.51 24.13 12.70 76 1 1.500 1.398 .950 .500 Pb-free 5767042-2
SnPb 767042-3 50.80 48.21 36.83 25.40 114 2 2.000 1.898 1.450 1.000 Pb-free 5767042-3
SnPb 767042-4 63.50 60.91 49.53 38.10 152 3 2.500 2.398 1.950 1.500 Pb-free 5767042-4
SnPb 767042-5 76.20 73.61 62.23 50.80 190 4 3.000 2.898 2.450 2.000 Pb-free 5767042-5
SnPb 767042-6 88.90 86.31 74.93 63.50 228 5 3.500 3.398 2.950 2.500 Pb-free 5767042-6
SnPb 767042-7 101.60 99.00 87.63 76.20 266 6 4.000 3.898 3.450 3.000 Pb-free 5767042-7 Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant;
Indicates “5 of 6 compliant” (lead in solderable interface only). 29 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Vertical Plugs (Continued) 20.00 [.785] Stacking Height* ± 0.20 A [± .008] + 0.00 ± 0.03 – 0.05 5.28 Related Product Data B + .000 ± .001 [.208 ] [] – .002 Material and Finish — page 16 Performance Characteristics — 8.13 page 16 [.320] Mating Receptacles — pages 36-41 Technical Documents — page 81 18 Spaces at Position No. 1 Indicator ± 0.15 ± .006 0.64 [.025 ] D Spaces at ± 0.15 ± .006 = 11.43 [.450 ] ± 0.15 12.70 * 20.02 [.788] stack height when ± .006 ± 0.15 [.500 ] = E C mated to vertical receptacle; [± .006] 29.00 [1.143] stack height when mated to vertical receptacle Ground Bus (extended height). Plug Housing ± 0.28 19.81 16.76 ± .011 [.780 ] [.660] Extension Ref. Housing Contact Standard Ground 1.32 1.35 Bus Leads [.052] [.053] ± 0.05 0.43 ± .002 [.017 ] C Ref. 6.35 1.27 4 Spaces at [.250] [.050] 2.54 [.100] Position No. 2 Pad = 10.16 [.400] 3.53 [.139] ± 0.05 Ø 0.81 0.64 ± 0.05 2.39 ± .002 [.032 ] [.025] ± .002 [.094 ] Hole Orientation Hole Position No. 1 R 0.13 [.005] PC Board Hold Down Required or In This Area For Connectors 0.13 [.005] x 45° of 190 Positions and Larger. Size, Shape & Location at Customer’s Discretion. Recommended PC Board Layout (Connector Side of Board Shown) Notes: 1. For dual application, the orientation hole must be 1.98±0.03 [.078±.001]. See Application Specification 114-11004 for details. 2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics. 30 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Vertical Plugs (Continued) 20.00 [.785] Stacking Height (Continued) Dimensions No. of Plating Part Numbers Pos. ABCD E SnPb 767032-1
25.40 22.81 11.43 0.00 38 0 1.000 .898 .450 .000 Pb-free 5767032-1 SnPb 767032-2
38.10 35.51 24.13 12.70 76 1 1.500 1.398 .950 .500 Pb-free 5767032-2 SnPb 767032-3
50.80 48.21 36.83 25.40 114 2 2.000 1.898 1.450 1.000 Pb-free 5767032-3 SnPb 767032-4
63.50 60.91 49.53 38.10 152 3 2.500 2.398 1.950 1.500 Pb-free 5767032-4 SnPb 767032-5
76.20 73.61 62.23 50.80 190 4 3.000 2.898 2.450 2.000 Pb-free 5767032-5 SnPb 767032-6
88.90 86.31 74.93 63.50 228 5 3.500 3.398 2.950 2.500 Pb-free 5767032-6 SnPb 767032-7
101.60 99.00 87.63 76.20 266 6 4.000 3.898 3.450 3.000 Pb-free 5767032-7 Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant;
Indicates “5 of 6 compliant” (lead in solderable interface only). 31 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Vertical Plugs (Continued) 22.86 [.900] Stacking Height* ± 0.20 A [± .008] + 0.00 ± 0.03 – 0.05 5.28 Related Product Data B + .000 ± .001 [.208 ] [] – .002 Material and Finish — page 16 Performance Characteristics — 8.13 page 16 [.320] Mating Receptacles — pages 36-41 Technical Documents — page 81 18 Spaces at Position No. 1 Indicator ± 0.15 ± .006 0.64 [.025 ] D Spaces at ± 0.15 ± .006 = 11.43 [.450 ] ± 0.15 12.70 * 22.86 [.900] stack height when ± .006 ± 0.15 [.500 ] = E C mated to vertical receptacle; [± .006] 31.90 [1.255] stack height when mated to vertical receptacle Ground Bus (extended height). Plug Housing ± 0.28 22.66 19.61 ± .011 [.892 ] [.772] Extension Ref. Housing Contact Standard Ground 1.32 1.35 Bus Leads [.052] [.053] ± 0.05 0.43 ± .002 [.017 ] C Ref. 6.35 1.27 4 Spaces at [.250] [.050] 2.54 [.100] Position No. 2 Pad = 10.16 [.400] 3.53 [.139] ± 0.05 Ø 0.81 0.64 ± 0.05 2.39 ± .002 [.032 ] [.025] ± .002 [.094 ] Hole Orientation Hole Position No. 1 R 0.13 [.005] PC Board Hold Down Required or In This Area For Connectors 0.13 [.005] x 45° of 190 Positions and Larger. Size, Shape & Location at Customer’s Discretion. Recommended PC Board Layout (Connector Side of Board Shown) Notes: 1. For dual application, the orientation hole must be 1.98±0.03 [.078±.001]. See Application Specification 114-11004 for details. 2. Connectors with extended ground bus leads can be made available, consult Tyco Electronics. 32 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Vertical Plugs (Continued) 22.86 [.900] Stacking Height (Continued) Dimensions No. of Plating Part Numbers Pos. ABCD E SnPb 767017-1
25.40 22.81 11.43 0.00 38 0 1.000 .898 .450 .000 Pb-free 5767017-1 SnPb 767017-2
38.10 35.51 24.13 12.70 76 1 1.500 1.398 .950 .500 Pb-free 5767017-2 SnPb 767017-3
50.80 48.21 36.83 25.40 114 2 2.000 1.898 1.450 1.000 Pb-free 5767017-3 SnPb 767017-4
63.50 60.91 49.53 38.10 152 3 2.500 2.398 1.950 1.500 Pb-free 5767017-4 SnPb 767017-5
76.20 73.61 62.23 50.80 190 4 3.000 2.898 2.450 2.000 Pb-free 5767017-5 SnPb 767017-6
88.90 86.31 74.93 63.50 228 5 3.500 3.398 2.950 2.500 Pb-free 5767017-6 SnPb 767017-7
101.60 99.00 87.63 76.20 266 6 4.000 3.898 3.450 3.000 Pb-free 5767017-7 Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant;
Indicates “5 of 6 compliant” (lead in solderable interface only). 33 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Right-Angle Plugs Related Product Data Material and Finish — page 16 ± 0.20 Performance Characteristics — A [± .008] + 0.00 page 16 – 0.05 B ± 0.03 5.28 + .000 Mating Receptacles — pages 36-41 [] – .002 ± .001 [.208 ] Technical Documents — page 81 Position No. 1 Indicator Ground Bus 3.53 Housing ± 0.23 6.38 [.139] ± .009 [.251 ] Max. Contact ± .018 1.50 ± .007 18 Spaces at [.059 ] F ± 0.20 ± .008 0.64 [.025 ] ± 0.20 ± .008 D Spaces at = 11.43 [.450 ] ± 0.20 12.70 ± 0.20 ± .008 [.500 ] = E C [± .008] C Ref. ± 0.05 Ø 1.02 Hole 4.80 + 0.05 4 Spaces at ± .002 [.040 ] 0.36 [.189] – 0.02 0.81 2.54 [.100] + .002 [.032] [.014 ] Pad = 10.16 [.400] – .001 2.59 [.102] ± 0.05 2.41 Orientation Hole 3.73 0.64 ± .002 [.095 ] 1.78 ± 0.05 0.43 [.147] [.025] [.070] ± .002 [.017 ] Position No. 1 R 0.13 [.005] This Side or 0.13 [.005] x 45° Recommended PC Board Layout (Mirror Image on Opposite Side) 34 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Right-Angle Plugs (Continued) Platings Dimensions Part Numbers No. of Solder Pos. ABCD E F Contact Tube Tail SnPb 767006-1
Gold Pb-free 5767006-1 1.52 .060 SnPb 767055-1
25.40 22.81 11.43 0.00 38 0 PdNi 1.000 .898 .450 .000 Pb-free 5767055-1 SnPb 767039-1
2.31 PdNi .091 Pb-free 5767039-1 SnPb 767006-2
Gold Pb-free 5767006-2 1.52 .060 SnPb 767055-2
PdNi Pb-free 5767055-2 38.10 35.51 24.13 12.70 76 1 1.500 1.398 .950 .500 SnPb 767039-2
2.31 PdNi .091 Pb-free 5767039-2 SnPb 767170-2
2.97 PdNi .117 Pb-free 5767170-2 SnPb 767006-3
Gold Pb-free 5767006-3 1.52 .060 SnPb 767055-3
50.80 48.21 36.83 25.40 114 2 PdNi 2.000 1.898 1.450 1.000 Pb-free 5767055-3 SnPb 767039-3
2.31 PdNi .091 Pb-free 5767039-3 SnPb 767006-4
Gold Pb-free 5767006-4 1.52 .060 SnPb 767055-4
63.50 60.91 49.53 38.10 152 3 PdNi 2.500 2.398 1.950 1.500 Pb-free 5767055-4 SnPb 767039-4
2.31 PdNi .091 Pb-free 5767039-4 SnPb 767006-5
Gold Pb-free 5767006-5 1.52 .060 SnPb 767055-5
76.20 73.61 62.23 50.80 190 4 PdNi 3.000 2.898 2.450 2.000 Pb-free 5767055-5 SnPb 767039-5
2.31 PdNi .091 Pb-free 5767039-5 SnPb 767006-6
Gold Pb-free 5767006-6 1.52 .060 SnPb 767055-6
88.90 86.31 74.93 63.50 228 5 PdNi 3.500 3.398 2.950 2.500 Pb-free 5767055-6 SnPb 767039-6
2.31 PdNi .091 Pb-free 5767039-6 SnPb 767006-7
Gold Pb-free 5767006-7 1.52 .060 SnPb 767055-7
101.60 99.00 87.63 76.20 266 6 PdNi 4.000 3.898 3.450 3.000 Pb-free 5767055-7 SnPb 767039-7
2.31 PdNi .091 Pb-free 5767039-7 S = Printed circuit board thickness connector is intended to be used on. Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant;
Indicates “5 of 6 compliant” (lead in solderable interface only). 35 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Vertical Receptacles Related Product Data Material and Finish — page 16 A Performance Characteristics — + 0.08 Position No. 1 Indicator – 0.00 page 16 B + .003 ± 0.06 5.38 [] – .000 Mating Plugs — pages 19-35 ± .002 [.212 ] Technical Documents — page 81 6.91 [.272] 18 Spaces at ± 0.20 ± .008 0.64 [.025 ] ± 0.20 ± .008 D Spaces at = 11.43 [.450 ] ± 0.20 12.70 ± 0.20 ± .008 [.500 ] = E C [± .008] ± 0.25 6.10 ± .010 Ground Bus [.240 ] Contact ± 0.15 Housing 5.99 ± .006 [.236 ] ± 0.15 1.35 0.18 6.43 2.69 Ref. Standard Ground ± .006 ± 0.15 [.053 ] [.007] [.253] F [.106] Bus Leads 8.72 [± .006] Ø 1.94 2.26 Ref. [.343] [.077] [.089] 2.26 Max. 2.74 [.089] [.108] 2.74 [.108] ± 0.05 0.43 ± .002 [.017 ] C Ref. 6.35 1.27 4 Spaces at [.250] [.050] 2.54 [.100] Position No. 1 Pad = 10.16 [.400] 3.53 [.139] ± 0.05 0.64 Ø 0.81 ± .002 [.025] Orientation Hole [.032 ] (See Note) Dia. Typ. For Barbed Parts; Position No. 2 ± 0.05 Ø 0.64 R 0.13 [.005] ± .002 [.025 ] or PC Board Hold Down Required Dia. Typ. For 0.13 [.005] x 45° In This Area For Connectors Barbless Parts of 190 Positions and Larger. Size, Shape & Location at Customer’s Discretion. Recommended PC Board Layout (Connector Side of Board Shown) Note: For standard applications, orientation hole to be Ø 2.39±0.05 [.094±.002]; For slip-fit applications, orientation hole to be Ø 2.00±0.03 [.079±.001]. 36 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Vertical Receptacles (Continued) Part Numbers Platings Barbed G/B Leads Barbless G/B Leads Dimensions No. of Solder T&R T&R Pos. A BC D E F Contact Tail Vacuum Caps Vacuum Caps Tube Tube With Without With Without Gold 2-767004-2
767096-8
767096-1
767110-1
767114-1
767114-8
1.40 SnPb .055 PdNi 767181-1
— . — . — . — . — . 2.74 — . — .



SnPb PdNi 767054-1 767171-1 767081-1 767115-1 .108 25.40 22.86 11.43 38 0 — 1.000 .900 .450 1.40
Pb-free Gold 2-5767004-2
5767096-8
5767096-1
5767110-1
5767114-1
5767114-8 .055 Gold 5767181-1
— . — . — . — . — . 2.74 Pb-free .108 PdNi 5767054-1
5767171-1
— . 5767081-1
5767115-1
— . Gold 2-767004-3
767096-9
767096-2
767110-2
767114-2
767114-9
1.40 SnPb .055 PdNi 767181-2
— . — . — . — . — . 2.74


SnPb PdNi 767054-2 — . — . 767081-2 767115-2 — . .108 38.10 35.56 24.13 12.70 76 1 1.500 1.400 .950 .500 1.40 Pb-free Gold 2-5767004-3
5767096-9
5767096-2
5767110-2
5767114-2
5767114-9
.055 Gold 5767181-2
— . — . — . — . — . 2.74 Pb-free .108 PdNi 5767054-2
— . — . 5767081-2
5767115-2
— . Gold 2-767004-4
1-767096-0
767096-3
767110-3
767114-3
1-767114-0
1.40 SnPb .055 PdNi 767181-3
— . — . — . — . — . 2.74


SnPb PdNi 767054-3 — . — . 767081-3 767115-3 — . .108 50.80 48.26 36.83 25.40 114 2 2.000 1.900 1.450 1.000 1.40 Pb-free Gold 2-5767004-4
1-5767096-0
5767096-3
5767110-3
5767114-3
1-5767114-0
.055 Gold 5767181-3
— . — . — . — . — . 2.74 Pb-free .108 PdNi 5767054-3
— . — . 5767081-3
5767115-3
— . Gold 2-767004-5
1-767096-1
767096-4
767110-4
767114-4
1-767114-1
1.40 SnPb .055 PdNi 767181-4
— . — . — . — . — . 2.74


SnPb PdNi 767054-4 — . — . 767081-4 767115-4 — . .108 63.50 60.96 49.53 38.10 152 3 2.500 2.400 1.950 1.500 1.40 Pb-free Gold 2-5767004-5
1-5767096-1
5767096-4
5767110-4
5767114-4
1-5767114-1
.055 Gold 5767181-4
— . — . — . — . — . 2.74 Pb-free .108 PdNi 5767054-4
— . — . 5767081-4
5767115-4
— . Gold 2-767004-6
1-767096-2
767096-5
767110-5
767114-5
1-767114-2
1.40 SnPb .055 PdNi 767181-5
— . — . — . — . — . 2.74


SnPb PdNi 767054-5 — . — . 767081-5 767115-5 — . .108 76.20 73.66 62.23 50.80 190 4 3.000 2.900 2.450 2.000 1.40 Gold 2-5767004-6
1-5767096-2
5767096-5
5767110-5
5767114-5
1-5767114-2
Pb-free .055 Gold 5767181-5
— . — . — . — . — . 2.74 Pb-free .108 PdNi 5767054-5
— . — . 5767081-5
5767115-5
— . Gold 2-767004-7
1-767096-3
— . 767110-6
— . — . 1.40 SnPb .055 PdNi 767181-6
— . — . — . — . — . 2.74

SnPb PdNi 767054-6 — . — . 767081-6 — . — . .108 88.90 86.36 74.93 63.50 228 5 3.500 3.400 2.950 2.500 1.40 Pb-free Gold 2-5767004-7
— . — . 5767110-6
— . — . .055 Gold 5767181-6
— . — . — . — . — . 2.74 Pb-free .108 PdNi 5767054-6
— . — . 5767081-6
— . — . Gold 2-767004-8
— . — . 767110-7
— . — . 1.40 SnPb .055 PdNi 767181-7
— . — . — . — . — . 2.74

SnPb PdNi 767054-7 — . — . 767081-7 — . — . .108 101.60 99.06 87.63 76.20 266 6 4.000 3.900 3.450 3.000 1.40 Pb-free Gold 2-5767004-8
— . — . 5767110-7
— . — . .055 Gold 5767181-7
— . — . — . — . — . 2.74 Pb-free .108 PdNi 5767054-7
— . — . 5767081-7— . — . Note: Contact Product Engineering regarding options not present in this table. Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant;
Indicates “5 of 6 compliant” (lead in solderable interface only). 37 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Vertical Receptacles (Extended Height) Related Product Data Material and Finish — page 16 A Performance Characteristics — + 0.08 page 16 – 0.00 B + .003 Position No. 1 Indicator [] – .000 Mating Plugs — pages 19-35 Technical Documents — page 81 ± 0.06 5.38 6.91 8.00 ± .002 [.212 ] [.272] [.315] 18 Spaces at ± 0.20 ± .008 0.64 [.025 ] ± 0.20 ± .008 D Spaces at = 11.43 [.450 ] ± 0.20 12.70 ± 0.20 ± .008 [.500 ] = E C ± 0.25 15.01 [± .008] ± .010 Ground Bus [.591 ] Contact Housing ± 0.15 14.91 ± .006 [.587 ] ± 0.15 8.72 Standard Ground F Ø 1.94 [± .006] Ref. [.343] Bus Leads [.077] Max. ± 0.05 0.43 ± .002 [.017 ] C Ref. 6.35 1.27 4 Spaces at [.250] [.050] 2.54 [.100] Position No. 1 Pad = 10.16 [.400] 3.53 [.139] ± 0.05 Ø 0.81 0.64 ± .002 Orientation Hole [.032 ] [.025] Dia. Typ. For Barbed Parts; R 0.13 [.005] ± 0.05 Ø 0.64 or ± .002 [.025 ] PC Board Hold Down Required 0.13 [.005] x 45° Dia. Typ. For in This Area For Connectors Barbless Parts of 190 Positions and Larger. Size, Shape & Location at Customer’s Discretion. Recommended PC Board Layout (Connector Side of Board Shown) 38 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System MICTOR Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Vertical Receptacles (Extended Height) (Continued) Part Numbers Platings Barbed G/B Leads Barbless G/B Leads Dimensions No. of Solder T&R T&R Pos. A BC D E F Contact Tail Vacuum Caps Vacuum Caps Tube Tube With Without With Without 1.37 [.054] Gold 767130-1
767146-1
767146-8
—— — 1.37 [.054] SnPb 767094-1
767178-1
767178-8
— —— PdNi 2.72 [.107] 767154-1
— 767153-8
767095-1
— — 25.40 22.86 11.43 38 0 — 1.000 .900 .450 1.37 [.054] Gold 5767130-1
5767146-1
5767146-8
—— — 1.37 [.054] Pb-free 5767094-1
5767178-1
1761316-8
—— — PdNi 2.72 [.107] 5767154-1
— 5767153-8
5767095-1
— — 1.37 [.054] Gold 767130-2
767146-2
767146-9
— —— 1.37 [.054] SnPb 767094-2
767178-2
—— —— PdNi 2.72 [.107] 767154-2
— 767153-9
767095-2
—— 38.10 35.56 24.13 12.70 76 1 1.500 1.400 .950 .500 1.37 [.054] Gold 5767130-2
5767146-2
5767146-9
— —— 1.37 [.054] Pb-free 5767094-2
5767178-2
—— —— PdNi 2.72 [.107] 5767154-2
— 5767153-9
5767095-2
—— 1.37 [.054] Gold 767130-3
767146-3
1-767146-0
— —— 1.37 [.054] SnPb 767094-3
— —— —— PdNi 2.72 [.107] 767154-3
— 1-767153-0
767095-3
767145-3
1-767145-0
50.80 48.26 36.83 25.40 114 2 2.000 1.900 1.450 1.000 1.37 [.054] Gold 5767130-3
5767146-3
1-5767146-0
—— — 1.37 [.054] Pb-free 5767094-3
— —— —— PdNi 2.72 [.107] 5767154-3
— 1-5767153-0
5767095-3
5767145-3
1-5767145-0
1.37 [.054] Gold 767130-4
767146-4
1-767146-1
—— — 1.37 [.054] SnPb 767094-4
— —— —— PdNi 2.72 [.107] 767154-4
— 1-767153-1
767095-4
— 1-767145-1
63.50 60.96 49.53 38.10 152 3 2.500 2.400 1.950 1.500 1.37 [.054] Gold 5767130-4
5767146-41-5767146-1
—— — 1.37 [.054] Pb-free 5767094-4
— —— —— PdNi 2.72 [.107] 5767154-4
— 1-5767153-1
5767095-4
— 1-5767145-1
1.37 [.054] Gold 767130-5
— —— —— 1.37 [.054] SnPb 767094-5
767178-5
1-767178-2
—— — PdNi 2.72 [.107] 767154-5
— 1-767153-2
767095-5
—— 76.20 73.66 62.23 50.80 190 4 3.000 2.900 2.450 2.000 1.37 [.054] Gold 5767130-5
— —— —— 1.37 [.054] Pb-free 5767094-5
5767178-5
1-1761316-2
—— — PdNi 2.72 [.107] 5767154-5
— 1-5767153-2
5767095-5
—— 1.37 [.054] Gold 767130-6
— —— —— 1.37 [.054] SnPb 767094-6
— —— —— PdNi 2.72 [.107] 767154-6
— 1-767153-3
767095-6
—— 88.90 86.36 74.93 63.50 228 5 3.500 3.400 2.950 2.500 1.37 [.054] Gold 5767130-6
— —— —— 1.37 [.054] Pb-free 5767094-6
— —— —— PdNi 2.72 [.107] 5767154-6
— 1-5767153-3
5767095-6
—— 1.37 [.054] Gold 767130-7
— —— —— 1.37 [.054] SnPb 767094-7
— —— —— PdNi 2.72 [.107] 767154-7
— 1-767153-4
767095-7
—— 101.60 99.06 87.63 76.20 266 6 4.000 3.900 3.450 3.000 1.37 [.054] Gold 5767130-7
— —— —— 1.37 [.054] Pb-free 5767094-7
— —— —— PdNi 2.72 [.107] 5767154-7
— 1-5767153-4
5767095-7
—— Note: Contact Product Engineering regarding options not present in this table. Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant;
Indicates “5 of 6 compliant” (lead in solderable interface only). 39 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR Right-Angle Receptacles Related Product Data Material and Finish — page 16 A Performance Characteristics — + 0.08 Position No. 1 Indicator page 16 – 0.00 B + .003 [ ] – .000 Mating Plugs — pages 19-35 Application Tooling — page 77 6.91 [.272] Technical Documents — page 81 ± 0.05 5.38 ± .002 [.212 ] Ground Bus Contact 3.76 Housing ± 0.15 5.99 [.148] ± .006 [.236 ] Max. 1.50 18 Spaces at [.059] F ± 0.20 ± .008 0.64 [.025 ] D Spaces at ± 0.20 ± .008 = 11.43 [.450 ] ± 0.20 12.70 ± .008 ± 0.20 [.500 ] = E C [± .008] C Ref. ± 0.05 Ø 1.02 4.80 Hole 4 Spaces at ± .002 + 0.05 [.040 ] 0.36 [.189] 0.81 – 0.02 2.54 [.100] + .002 [.032] [.014 ] = 10.16 [.400] Pad – .001 2.59 [.102] ± 0.05 2.41 Orientation Hole 3.73 0.64 ± .002 1.78 ± 0.05 [.095 ] 0.43 [.147] [.025] [.070] ± .002 [.017 ] Position No. 1 R 0.13 [.005] Far Side or 0.13 [.005] x 45° Recommended PC Board Layout (Mirror image on opposite side) PC Board Thickness: 1.57 [.062] 40 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 MICTOR Interconnection System