TE CONNECTIVITY 82A0811-14-9

82A0811 SPECIFICATION CONTROL DRAWING TITLE Date Revision WIRE, RADIATION-CROSSLINKED, MODIFIED FLEXIBLE ETFE-INSULATED, 11-5-13 F NORMAL WEIGHT, GENERAL PURPOSE, 600 VOLT This speciŢ cation sheet forms a part of the latest issue of Raychem SpeciŢ cation 80. CONDUCTOR - TIN-COATED COPPER JACKET - RADIATION-CROSSLINKED, MODIFIED FLEXIBLE ETFE PRIMARY INSULATION - RADIATION-CROSSLINKED, MODIFIED FLEXIBLE ETFE COLOR - LIGHT GREEN TABLE I. CONSTRUCTION DETAILS DIAMETER OF FINISHED WIRE STRANDED WIRE CONDUCTOR MAXIMUM PART NUMBER MAXIMUM CONDUCTOR SIZE STRANDING RESISTANCE DIAMETER 1/ (inch) WEIGHT (AWG) (number x AWG) AT 20°C (inch) (lbs/1000 ft.) MINIMUM MAXIMUM (ohms/1000 ft.) 82A0811-24-* 24 105 x 44 .023 .027 28.2 .044 ± .003 2.5 82A0811-22-* 22 154 x 44 .029 .033 19.2 .054 ± .003 3.7 82A0811-20-* 20 154 x 42 .037 .043 11.7 .064 ± .004 5.2 82A0811-18-* 18 259 x 42 .047 .053 7.14 .076 ± .004 8.0 82A0811-16-* 16 259 x 40 .061 .067 4.53 .092 ± .005 11.9 82A0811-14-* 14 665 x 42 .078 .086 2.96 .116 ± .005 19.3 82A0811-12-* 12 665 x 40 .096 .106 1.89 .137 ± .006 27.9 82A0811-10-* 10 665 x 38 .126 .140 1.12 .187 ± .008 50.0 82A0811-8-* 8 665 x 36 .157 .173 .714 .230 ± .008 77.3 82A0811-6-* 6 1045 x 36 .192 .208 .490 .277 ± .010 118. 82A0811-4-* 4 1665 x 36 .265 .285 .326 .359 ± .010 189. 82A0811-2-* 2 1665 x 34 .325 .345 .204 .433 ± .016 282. 82A0811-1-* 1 2109 x 34 .370 .400 .163 .488 ± .016 348. 82A0811-0-* 0 2660 x 34 .435 .465 .133 .558 ± .016 442. 82A0811-00-* 00 3325 x 34 .485 .515 .102 .612 ± .016 544. 82A0811-000-* 000 4123 x 34 .540 .575 .087 .678 ± .016 668. 82A0811-0000-* 0000 5320 x 34 .615 .655 .066 .771 ± .022 863. Users should evaluate the suitability of this product for their application. SpeciŢ cations are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any speciŢ cation, without notiŢ cation to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL. Redwood City, CA 94063-3800 Page 1 of 2 Phone: 1-800-227-8816 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. Fax: 1-650-361-6297 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. © 2013 Tyco Electronics Corporation. All rights reserved. 82A0811 SPECIFICATION CONTROL DRAWING Page Revision 2 of 2 F TABLE II. PERFORMANCE DETAILS BEND TESTING PART NUMBER MANDREL DIAMETER WEIGHT 1/ (inch) (± 3%) (lbs) (± 3%) CROSSLINKING PROOF TEST CROSSLINKING PROOF TEST 82A0811-24-* .500 .750 82A0811-22-* .500 1.00 82A0811-20-* .500 1.50 82A0811-18-* .750 2.00 82A0811-16-* 1.00 2.00 82A0811-14-* 1.00 3.00 82A0811-12-* 1.50 3.00 82A0811-10-* 2.00 3.00 82A0811-8-* 3.00 4.00 82A0811-6-* 4.00 4.00 82A0811-4-* 5.00 4.00 82A0811-2-* 6.00 6.00 82A0811-1-* 8.00 6.00 82A0811-0-* 8.00 6.00 82A0811-00-* 10.0 8.00 82A0811-000-* 10.0 8.00 82A0811-0000-* 10.0 8.00 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 150°C INSULATION THICKNESS: Maximum continuous conductor temperature AWG 24-18: .004 in. (minimum) for primary insulation VOLTAGE RATING: 600 volts (rms) at sea level .004 in. (minimum) for outer jacket CONCENTRICITY: 70% (minimum) AWG 16-10: .005 in. (minimum) for primary insulation CROSSLINKING PROOF TEST: 300 ± 3°C for 7 hours .005 in. (minimum) for outer jacket IDENTIFICATION AND COLOR STRIPING DURABILITY: AWG 8-4: .008 in. (minimum) for primary insulation 125 cycles (250 strokes) (minimum), 500 g weight .012 in. (minimum) for outer jacket INSULATION ELONGATION AND TENSILE STRENGTH: AWG 2-0000: .010 in. (minimum) for primary insulation AWG 24-10: Elongation, 75% (minimum) .015 in. (minimum) for outer jacket Tensile Strength, 3500 lbf/in² (minimum) JACKET COLOR: White preferred AWG 8-0000: Elongation, 125% (minimum) SECANT MODULUS (Test per ASTM D 882): 4 2 Tensile Strength, 3000 lbf/in² (minimum) AWG 24-10: 5.0 x 10 lbf/in (maximum) 4 2 INSULATION FLAWS: AWG 8-0000: 4.0 x 10 lbf/in (maximum) Primary Insulation, 2% strain, 2 inch jaw separation, 0.2 inch/minute Spark Test, 1.5 kV (rms) at 3 kHz SHRINKAGE: 150 ± 3°C for 6 hours, Impulse Dielectric Test, 6.0 kV (peak) AWG 24-10: 0.13 in. (maximum) in 12 inches Finished Wire, AWG 8-0000: 0.25 in. (maximum) in 12 inches Spark Test, 3.0 kV (rms) at 3 kHz VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms), 60 Hz Impulse Dielectric Test, 8.0 kV (peak) 1/ PART NUMBER: The “*” in the part numbers on pages 1 and 2 shall be replaced by a color code designator. Example: AWG 12, white: 82A0811-12-9 AWG 12, white with a black stripe: 82A0811-12-90 1/ See footer section on page 1