General Purpose Relays PCB Relays SCHRACK Power Relay RF n 1 pole 16A, 1 form A (NO) or 1 form B (NC) contact n Coil power 400mW n Reinforced insulation (EN 61810, 60335, 60730) n Ambient temperature up to 105°C n Quick connect terminals for load side n WG version: Materials in accordance to IEC 60335-1 Typical applications Oven control, electric heating, power supplies, air conditioning, microwave F0273-BI ovens, hobs VZ Approvals Coil Data VDE REG.-Nr. A652, UL E214025, CQC 05001014817 Coil voltage range 5 to 60VDC Technical data of approved types on request Operative range, IEC 61810 2 Coil insulation system according UL1446 class F Contact Data Contact arrangement 1 form A (NO) or 1 form B (NC) Coil versions, DC coil Rated voltage 250VAC Coil Rated Operate Release Coil Rated coil Max. switching voltage 400VAC code voltage voltage voltage resistance power Rated current 16A VDC VDC VDC Ω±10% mW Limiting making current, form A contact, 005 5 3.5 0.5 62 403 max. 4s, duty factor 10 % 25A 006 6 4.2 0.6 90 400 Breaking capacity max. 4000VA 009 9 6.3 0.9 203 399 Contact material AgNi 90/10 012 12 8.4 1.2 360 400 Min. recommended contact load 12VAC at 500mA 024 24 16.8 2.4 1440 400 -1 Frequency of operation, with/without load 360/72000h 048 48 33.6 4.8 5520 417 Operate/release time max. 11/7ms 060 60 42.0 6.0 8570 420 All figures are given for coil without pre-energization, at ambient temperature +23°C. Bounce time max., form A/form B 4/4ms Other coil voltages on request. Contact ratings Type Contact Load Cycles IEC 61810 3 RF334; RFH34 A (NO) 16A, 250VAC resistive, 85°C 100x10 3 RF334; RFH34 A (NO) 11A, 250VAC resistive, 85°C 250x10 3 RF334; RFH34 A (NO) 20A, 250VAC resistive, 85°C 25x10 3 RF334; RFH34 A (NO) 25A, 250VAC resistive, 70°C 15x10 3 RF354; RFH54 B (NC) 16A, 250VAC resistive, 85°C 100x10 3 RF354; RFH54 B (NC) 20A, 250VAC resistive, 85°C 50x10 3 RF354; RFH54 B (NC) 25A, 250VAC resistive, 70°C 20x10 3 RFH34 A (NO) 16A, 250VAC resistive, 105°C 100x10 3 RFH34 A (NO) 11A, 250VAC resistive, 105°C 250x10 3 RFH34 A (NO) 18.5A, 250VAC resistive, 105°C 20x10 3 RFH34 A (NO) 10A, 400VAC resistive, 105°C 150x10 6 Mechanical endurance >10x10 operations Insulation Data Initial dielectric strength between open contacts 1000V rms between contact and coil 4000V rms Clearance/creepage between contact and coil ≥8/8mm Material group of insulation parts IIIa Tracking index of relay base PTI250V 1 11-2011, Rev. 1111 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions General Purpose Relays PCB Relays SCHRACK Power Relay RF (Continued) Other Data PCB layout / terminal assignment Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Bottom view on solder pins refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Resistance to heat and fire WG version according EN 60335-1, par.30 Ambient temperature RF3 -40 to 85°C RFH -40 to 105°C Category of environmental protection 1) IEC 61810 RTII - flux proof S0256-CA Vibration resistance (functional), form A/form B, 55 to 500Hz 20/5g Shock resistance (destructive) 100g 1 form A (NO) contact Terminal type PCB-THT, quick connect for load side Weight 20g Resistance to soldering heat THT, IEC 60068-2-20 flux proof version 270°C/10s wash tight version 260°C/5s Packaging/unit tray/30 pcs., box/300 pcs. S0256-CB 1) RTIII - wash tight version on request 1 form B (NC) contact S0256-CC Dimensions Quick connect terminals vertical Quick connect terminals horizontal S0282-CI S0282-CJ 2 11-2011, Rev. 1111 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions General Purpose Relays PCB Relays SCHRACK Power Relay RF (Continued) Product code structure Typical product code RF 3 3 4 012 WG Type RF Power Relay RF Version 3 16A, 85°C H 16A, 105°C Contact configuration 3 1 form A (NO) contact, quick connect term. vertical D 1 form A (NO) contact, quick connect term. horizontal 5 1 form B (NC) contact, quick connect term. vertical F 1 form B (NC) contact, quick connect term. horizontal Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Version Blank Standard version WG Product in accordance with IEC 60335-1 (domestic appliances) Wash tight version on request Product code Contact arrangement Version Coil Version Part number RF334012 1 form A (NO) 85°C 12VDC Standard 8-1415513-1 RFH34009WG contact 105°C 9VDC IEC60335-1 compliant 4-1415520-1 RFH34012WG 12VDC 5-1415520-1 RFH34024 24VDC Standard 1415511-1 RFH54006WG 1 form B (NC) 6VDC IEC60335-1 compliant 1415521-1 RFH54024WG contact 24VDC 3-1415521-1 RFHD4012WG 1 form A (NO) 12VDC 9-1415521-1 This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 3 11-2011, Rev. 1111 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions