Manufacturers
TE CONNECTIVITY 91019-3
Description
Hand Tools EXTRACTION TOOL
91019-3
Part Number
91019-3
Price
Request Quote
Manufacturer
TE CONNECTIVITY
Lead Time
Request Quote
Category
Tools and Supplies » Assembly Tools
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
91019-3
Industry Aliases
91019-3
Sub-Category
Electronics Assembly Tools
Brand
AMP
Factory Pack Quantity
1
Datasheet
DDEController?Action=showdoc&DocId=Specification+Or+Standard%7F408-7276%7FC%7Fpdf%7FEnglish%7FENG_SS_408-7276_C.pdf
79 KiB
Extracted Text
Instruction Sheet Extraction Tool 91019-3 408-7276 for Type XII Contacts 23 JAN 12 Rev C Wire Lead Tool Tip Tip Male Contact Handle Housing Tip Offsets in Cavity Figure 1 Figure 3 1. INTRODUCTION 5. Remove the contact by pulling it out of the rear of cavity. This tool (see Figure 1) is used to extract Type XlI (male and female) Contacts from their housings. A list of the 3.2. Extraction of Female Contact contacts is shown in the table in Figure 2. 1. Insert the tool tips into the offsets in the cavity. See Read these instructions carefully before using the tool. Figure 4 . 2. Push the tool into the housing until it bottoms in the CONTACT NUMBER cavity. FEMALE CONTACT MALE CONTACT The rear section of the handle will back out of the NOTE 66261 (66255 LP) tool. 66258 66262 (66256 LP) i (66252 LP) 66329 (66330 LP) 3. Keeping the tool bottomed in the cavity, push the 66259 (66253 LP) rear section of thehandle toward thehousing. 66257 66260 (66254 LP) 4. Remove the contact by pulling it out of rear of the 66251 LP) cavity. 66326 (66327 LP) Figure 2 Wire Lead 2. DESCRITION The tool consists of a sectionalized handle (see Cavity Figure 1) and two tooling tips. 3. EXTRACTION Housing 3.1. Exraction of Male Contact Tool Tips 1. Pull the rear section of handle back. 2. Keeping sections of handle separated, slide tool tips Figure 4 over male contact and into offsets in cavity. See Figure 3. 4. REVISION SUMMARY 3. Push the tips of the tool into the housing until they Revisions to this instruction sheet include: bottom in the cavity. • Changed company name and logo 4. Keeping the tool bottomed in the cavity, push the • Revised title error rear section of the handle toward the housing. © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1-800-722-1111 This controlled document is subject to change. 1 of 1 All Rights Reserved PRODUCT INFORMATION 1-800-522-6752 For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com LOC B TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 91019-3?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Torque Wrenches Are Used To Properly Install Or Disassemble The Connectors 1055419-1
Tool For RF Connectors 1055442-1
Tool For RF Connectors 1055443-1
Insertion Tool For RF Connectors 1055447-1
Insertion Tool For RF Connectors 1055448-1
Assembly Tools, Sma Right Angle Cable Plugs 1055451-1
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods