Manufacturers
TE CONNECTIVITY BND54AB00-2010A
Description
Shrink Boot Adapters 180° 20/37 Shell Size
BND54AB00-2010A
Part Number
BND54AB00-2010A
Price
Request Quote
Manufacturer
TE CONNECTIVITY
Lead Time
Request Quote
Category
Connectors » Shrink Boot Adapters
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
BND54AB00-2010A
Industry Aliases
A00537-000, BND54AB00-2010A
Sub-Category
Shrink Boot Adapters
Brand
Raychem Wire and Tubing
Factory Pack Quantity
1
Datasheet
DDEController?Action=showdoc&DocId=Customer+Drawing%7FBND54A%7FB%7Fpdf%7FEnglish%7FENG_CD_BND54A_B.pdf
1272 KiB
Extracted Text
ASSY USED ON: BAND ( SUPPLIED FLAT) 3 9 (SEE PART NUMBER BREAKDOWN FOR OPTIONS) CODE 54 - BANDING BACKSHELL BNX54AB00-1608 -S SERIES BNX - BAND STRAP NOT INCLUDED BND - BAND STRAP INCLUDED (SEE BAND TERMINATION CONFIGURATION) CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-016 FINISH REFER TO CH00-0250-016 ANGLE ORDER NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) BAND TERMINATION CONFIGURATION 3 9 V - ONE STEP STANDARD BAND W - ONE STEP MICROBAND U - TWO STEP STANDARD BAND FOR BNX, LEAVE BLANK OPTION FIELD SEPARATOR MODIFICATION CODE REFER TO CH00-0250-016 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD BY MEANS OF A BAND STRAP AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-016. 3. SEE DRAWING BND-XXXXX FOR BAND STRAP OPTIONS, DIMENSIONS AND INFORMATION. 4. BACKSHELL TO BE PERMANENTLY MARKED WITH CODE IDENTIFICATION NUMBER AND FULL BASIC PART NUMBER (e.g. 06090-BND54AB00-1608). BACKSHELL TO BE MARKED WITH "BND" EVEN IF NO BAND IS ORDERED. THE BAND TERMINATION CONFIGURATION CODE IS FOR ORDERING INFORMATION ONLY AND IS NOT A PART MARKING REQUIREMENT. 5. ALL ENTRY SIZES ARE SHOWN IN TABLE 2. MAXIMUM ENTRY SIZES ARE SHOWN IN TABLE 1. FOR LARGER ENTRY SIZES, A 2 PIECE BACKSHELL ASSMEBLY (TYPE 2) IS SUPPLIED. SEE CH00-0250-016 FOR FURTHER DETAILS. 6. BACKSHELL MATES TO MIL-DTL-81703, SERIES III, MS3424, MS3446, MS3464, MS3467, MS3468. 7. BACKSHELL MATES TO MIL-C-5015G, MS3400 SERIES, CLASS D, E, K, L, U & W, MS3400, MS3401, MS3404, MS3406 MS3424, MS3446, MS3464, MS3467, MS3468, MS3450, MS3451, MS3454, MS3456, MS3470, MS3471, MS3472, MS3474, MS3475, MS3476. MIL-C-83723, SERIES II, CLASS A & L. MIL-C-83723, SERIES I & II, CLASS A, G, K, R & S: M83723/1, /2, /3, /4, /5, /6, /7, /8, /13, /14, /36, /37, /38, /39, /40, /41, /42, /43, /48, /49, /65, /66, /67, /68, /69, /70, /71, /72, /73, /74, /75, /76, /77, /78, /82, /83, /84, /85, /86, /87, /91, /92, /95, /97, /98, (MS3155 CONTROLLED INTERFACE). 8. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED. 9. V AND U BANDS ARE SUITABLE FOR ENTRY SIZES 03-24, W IS SUITABLE FOR ENTRY SIZES 03-12 ONLY. CONTACT FACTORY FOR BAND OPTIONS ON LARGER ENTRY SIZES. DATE 3RD ANGLE K.WINCZURA DRAWN PROJECTION TITLE: 17/09/2015 NOT TO CHECKED 17/09/2015 SCALE BANDING BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 17/09/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 17/09/2015 ANGULAR +/- 1° REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III E 17/09/2015 H.SMITH REVISED PER ECO-15-03261 F REVISED PER ECO-15-016545 17/11/2015 H.SMITH TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. BND54A F 1 POLAMCO/TE CAGE CODE: U5792 D G ASSY USED ON: IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 28,00 16,80 `0,50 30,00 18,00 13,00 3,50 STAINLESS STEEL TEETH VIEW PART MARK 5 HERE PART MARK STRAIGHT BACKSHELL - TYPE 1 HERE STRAIGHT BACKSHELL - TYPE 2 C 16,80 `0,50 F 45° BACKSHELL - TYPE 1 45° BACKSHELL - TYPE 2 H W 16,80 `0,50 M T H W 90° BACKSHELL - TYPE 2 90° BACKSHELL - TYPE 1 16,80 `0,50 M T 90° BACKSHELL - TYPE 1 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE NICKEL ALUMINIUM BRONZE DATE 3RD ANGLE K.WINCZURA DRAWN PROJECTION TITLE: 17/09/2015 NOT TO CHECKED 17/09/2015 SCALE BANDING BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 17/09/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 17/09/2015 ANGULAR +/- 1° REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III E 17/09/2015 H.SMITH REVISED PER ECO-15-03261 F REVISED PER ECO-15-016545 17/11/2015 H.SMITH TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. BND54A F 2 POLAMCO/TE CAGE CODE: U5792 ØB A THREAD XXXX E Z Ø E ØS ØY ØK ØB A THREAD XXX X J J ASSY USED ON: MODIFICATION S (SELF-LOCKING COUPLING NUT) 21,60 `0,50 SELF-LOCKING SELF-LOCKING SELF-LOCKING MECHANISM MECHANISM MECHANISM BACKSHELL - TYPE 1 BACKSHELL - TYPE 2 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL TABLE 1 OR NICKEL ALUMINIUM BRONZE ORDER SHELL SIZE ØB ØB MAX MAX C D W T E W T E A THREAD ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 NO. 6 7 MAX 8 ENTRY 08 8 & 8S 1/2-20 UNF 15,6 18,0 04 16,6 25,1 24,5 17,5 30,0 22,4 17,5 29,0 10, 10S, 10SL 10 5/8-24 UNEF 18,6 21,0 06 16,8 26,2 26,5 17,8 32,0 25,0 18,8 30,3 7 12 & 12S 21,7 25,0 17,3 26,6 29,0 18,7 33,5 28,3 20,4 31,9 12 3/4-20 UNEF 08 14 12 14 & 14S 7/8-20 UNEF 24,9 28,0 09 18,1 27,5 30,5 19,0 35,4 30,4 21,5 33,0 19 16 & 16S 28,2 31,0 19,0 28,3 34,0 21,0 36,7 33,5 23,0 34,5 16 1-20 UNEF 11 18 18 27 1 1/16-18 UNEF 30,9 34,0 12 19,2 28,8 37,0 23,5 36,7 35,5 24,0 35,5 37 20 34,1 36,5 20,1 29,7 42,0 27,0 38,3 38,8 25,7 37,2 20 1 3/16-18 UNEF 14 22 22 1 5/16-18 UNEF 37,3 39,8 16 20,3 30,0 44,0 27,0 40,0 41,9 27,2 38,7 24 24 1 7/16-18 UNEF 40,4 42,0 18 21,8 30,9 45,0 27,0 41,6 44,8 28,7 40,2 28 50,0 49,8 23,3 31,6 54,2 31,4 45,3 50,7 31,6 43,2 28 1 3/4-18UNS 22 32 32 2-18 UNS 56,3 57,2 26 25,0 33,2 60,9 36,4 48,1 60,0 33,5 46,0 36 62,7 63,6 26,2 34,4 67,2 38,0 51,3 65,5 36,0 51,3 36 2 1/4-16 UN 28 40 40 2 1/2-16 UN 69,0 70,0 32 28,6 35,7 73,2 41,0 54,3 72,0 39,3 54,3 44 75,4 75,4 30,1 37,3 79,5 44,1 57,5 75,5 40,8 57,5 44 2 3/4-16 UN 34 48 48 3-16UN 81,7 81,7 34 31,3 38,5 85,8 47,2 60,6 75,5 40,8 60,6 61 61 1 1/2-18 UNEF 42,0 43,6 18 22,1 30,9 47,8 28,0 43,0 48,3 27,0 43,1 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL TABLE 2 OR NICKEL ALUMINIUM BRONZE F G H M J H M J ENTRY ØZ ØS ØY ØK ØK MAX SIZE MIN MAX MAX MAX 8 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 4,7 7,8 14,0 03 NA NA NA NA NA NA NA NA NA NA 04 6,3 9,4 14,0 NA NA NA NA NA NA NA NA NA NA 05 7,9 11,0 15,5 21,0 24,6 12,5 26,2 24,0 15,5 32,0 24,3 17,2 31,2 9,5 12,5 17,2 21,0 24,6 12,5 26,2 24,0 15,5 32,0 24,3 17,2 31,2 06 07 11,1 14,1 18,7 21,0 24,6 12,5 26,2 24,0 15,5 32,0 24,3 17,2 31,2 12,7 15,7 20,3 24,5 28,3 13,1 26,6 27,0 17,0 33,5 28,3 19,4 33,0 08 09 14,2 17,3 21,9 24,5 28,3 13,1 26,6 27,0 17,0 33,5 28,3 19,4 33,0 15,8 18,8 23,5 29,0 32,4 13,5 27,5 31,0 19,5 35,4 31,1 21,0 34,9 10 17,4 20,5 25,1 32,5 35,6 14,5 28,3 34,0 21,0 36,7 34,2 22,8 35,5 11 12 19,0 22,0 26,7 32,5 35,6 14,5 28,3 34,0 21,0 36,7 34,2 22,8 35,5 20,6 23,6 28,3 35,5 38,5 15,5 28,8 35,0 20,0 38,3 38,5 25,3 37,2 13 14 22,2 25,2 29,9 35,5 38,5 15,5 28,8 35,0 20,0 38,3 38,5 25,3 37,2 23,8 26,8 31,5 37,0 41,7 16,1 29,7 38,0 21,5 40,0 40,7 26,1 38,7 15 16 25,4 28,4 33,1 37,0 41,7 16,1 29,7 38,0 21,5 40,0 40,7 26,1 38,7 18 28,6 30,0 36,3 40,0 43,9 16,5 30,0 42,0 24,0 41,6 43,7 27,6 40,2 31,8 34,8 39,5 43,5 47,0 17,0 30,9 45,0 25,5 43,0 46,4 29,1 44,9 20 22 35,0 38,0 42,7 48,5 50,0 18,5 31,3 54,5 31,0 45,1 50,0 31,0 45,1 38,1 41,1 45,9 52,1 56,0 21,9 32,8 58,0 33,0 51,1 53,5 33,0 51,1 24 26 9 41,3 44,3 49,1 56,6 61,3 25,7 32,8 62,5 35,0 51,1 58,0 35,0 51,1 44,5 47,5 52,3 63,0 64,5 26,9 33,8 65,5 34,5 54,1 61,0 34,5 54,1 28 9 30 9 47,6 50,7 55,6 75,5 80,2 29,2 34,4 69,0 36,0 57,4 64,5 36,0 57,4 50,8 53,8 58,5 75,5 80,2 29,2 34,4 72,0 37,5 57,4 67,5 37,5 57,4 32 9 34 9 54,0 57,0 61,8 75,5 80,2 29,2 34,4 75,5 39,0 57,4 71,0 39,0 57,4 DATE 3RD ANGLE K.WINCZURA DRAWN PROJECTION TITLE: 17/09/2015 NOT TO CHECKED 17/09/2015 SCALE BANDING BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 17/09/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 17/09/2015 ANGULAR +/- 1° REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-26482 SERIES II / MIL-DTL-83723 SERIES I & III E 17/09/2015 H.SMITH REVISED PER ECO-15-03261 F REVISED PER ECO-15-016545 17/11/2015 H.SMITH TE CONNECTIVITY - POLAMCO LTD RESERVES THE RIGHT TO AMEND THIS DRAWING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIME. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. BND54A F 3 POLAMCO/TE CAGE CODE: U5792 ØB 8 EAD A THR ØK 8 ØB 8 A THREAD
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the BND54AB00-2010A?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Shrink Boot Adapters 180?? 8/8S Shell Size Cadmium Over Electroless Nickel Aluminum Alloy Spin 201M1...
Shrink Boot Adapters 180?? 8/8S Shell Size Cadmium Over Electroless Nickel Aluminum Alloy Spin 201M1...
Shrink Boot Adapters 180 8/8S Shell Size Cadmium Over Electroless Nickel Aluminum Alloy Spin 201M108...
Shrink Boot Adapters 180 10/10S/10SL Shell Size Cadmium Over Electroless Nickel Aluminum Alloy Spin ...
Cable Accessories Adapter Aluminum Alloy Olive Drab 201M110-19B
Shrink Boot Adapters 180 10/10S/10SL Shell Size Spin 201M110-19C
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods