REV: DATE: CUSTOMER DRAWING B July 26, 2012 2012 Tyco Electronics Corporation. All rights reserved. TITLE: Raychem Harnessing HEXASHIELD ADAPTOR FOR 300 Constitution Drive CODE 40 CONNECTORS Menlo Park CA, 94025 U.S.A. PLAIN CLAMPING NUT UNLESS OTHERWISE SPECIFIED DOCUMENT NO. Tyco Electronics reserves the right to amend this DIMENSIONS ARE IN MILLIMETERS. drawing at any time. Users should evaluate the INCH DIMENSIONS ARE SHOWN IN HEX40L-KC-90-YY-AY-1 suitability of the product for their application. BRACKETS DRAWN: DATE: CAGE CODE: REVISED PER# FILE: SCALE: SHEET: IRT May 20, 2008 06090 HEX40L-KC-90-YY-AY-1 NONE 1 OF 3 ECO-12-013539 If this document is printed it becomes uncontrolled. Check for the latest revision. REV: DATE: CUSTOMER DRAWING B July 26, 2012 KIT DESCRIPTION ITEM DESCRIPTION MATERIAL 1 BODY ASSEMBLY STAINLESS STEEL 2 CLAMPING NUT - PLAIN STAINLESS STEEL 3 CONIC RING STAINLESS STEEL 4 STAR - PLAIN STAINLESS STEEL TABLE OF DIMENSIONS Order ØA Thread ØB ØC D E Shell Size Ferrule Quantity Number Class 6H Max Max Max Max Mil. Com. Standard 09 A 09 M12 x 1 19.0 17.5 24.4 30.5 1 [0.75”] [0.69”] [1.06] [1.20”] 11 B 11 M15 x 1 22.0 21.5 25.9 32.0 2 [0.87”] [0.85”] [1.02] [1.26”] 13 C 13 M18 x 1 25.5 22.5 27.9 34.0 3 [1.00”] [0.89”] [1.10”] [1.34”] PART NUMBERING 2012 Tyco Electronics Corporation. All rights reserved. TITLE: Raychem Harnessing HEXASHIELD ADAPTOR FOR 300 Constitution Drive CODE 40 CONNECTORS Menlo Park CA, 94025 U.S.A. PLAIN CLAMPING NUT UNLESS OTHERWISE SPECIFIED DOCUMENT NO. Tyco Electronics reserves the right to amend this DIMENSIONS ARE IN MILLIMETERS. drawing at any time. Users should evaluate the INCH DIMENSIONS ARE SHOWN IN HEX40L-KC-90-YY-AY-1 suitability of the product for their application. BRACKETS DRAWN: DATE: CAGE CODE: REVISED PER# FILE: SCALE: SHEET: IRT May 20, 2008 06090 HEX40L-KC-90-YY-AY-1 NONE 2 OF 3 ECO-12-013539 If this document is printed it becomes uncontrolled. Check for the latest revision. REV: DATE: CUSTOMER DRAWING B July 26, 2012 APPLICATION - These adaptors are designed to be mounted on the following connectors: MIL-DTL-38999 Series III and IV - They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular connectors only. - They are designed primarily for open wire bundle installation but are also designed to accept Raychem heat shrink moulded parts where strain relief is required – see illustration. - Use in conjunction with ferrules HET-A-0XX, which are purchased separately. Refer to HET-A-0XX Customer Drawing for relevant selection details. INSTALLATION - See Installation Procedure RPIP-696-07 for assembly. - See Installation Procedure RPIP-696-00 for shield termination. PACKAGING - All components are supplied in a plastic bag. NOTES! 1. Item 4 - Star - is not supplied with Hexashield Order Number 09. 2. Assembly is to be permanently marked with Code Identity Number and Part Number. (e.g. 06090 HEX40L-KC-90-13-A3-1) 2012 Tyco Electronics Corporation. All rights reserved. TITLE: Raychem Harnessing HEXASHIELD ADAPTOR FOR 300 Constitution Drive CODE 40 CONNECTORS Menlo Park CA, 94025 U.S.A. PLAIN CLAMPING NUT UNLESS OTHERWISE SPECIFIED DOCUMENT NO. Tyco Electronics reserves the right to amend this DIMENSIONS ARE IN MILLIMETERS. drawing at any time. Users should evaluate the INCH DIMENSIONS ARE SHOWN IN HEX40L-KC-90-YY-AY-1 suitability of the product for their application. BRACKETS DRAWN: DATE: CAGE CODE: REVISED PER# FILE: SCALE: SHEET: IRT May 20, 2008 06090 HEX40L-KC-90-YY-AY-1 NONE 3 OF 3 ECO-12-013539 If this document is printed it becomes uncontrolled. Check for the latest revision.