ØC MAX REV: DATE: CUSTOMER DRAWING A Aug 21, 2008 D O RING - SILICONE MAX 90º ADAPTOR -90 1 3 4 2 © 2008 Tyco Electronics. All rights reserved. TITLE: HEXASHIELD ADAPTOR FOR Raychem CODE 41 CONNECTORS Wire and Harnessing Products 300 Constitution Drive PLAIN CLAMPING NUT Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DOCUMENT NO. Tyco Electronics reserves the right to amend this drawing at DIMENSIONS ARE IN MILLIMETERS. any time. Users should evaluate the suitability of the INCH DIMENSIONS ARE SHOWN IN HEX41L-KC-90-YY-AY-1 product for their application. BRACKETS DRAWN: DATE: CAGE CODE: DCR # FILE: SCALE: SHEET: IRT JAN 08 06090 87004/41L-90 NONE 1 OF 3 ECO-08-019355 If this document is printed it becomes uncontrolled. Check for the latest revision. øB MAX MAX øA THREAD E MAX REV: DATE: CUSTOMER DRAWING A Aug 21, 2008 KIT DESCRIPTION ITEM DESCRIPTION MATERIAL 1 BODY ASSEMBLY STAINLESS STEEL 2 CLAMPING NUT - PLAIN STAINLESS STEEL 3 CONIC RING STAINLESS STEEL 4 STAR - PLAIN STAINLESS STEEL TABLE OF DIMENSIONS Order ØA Thread ØB ØC D E Shell Size Ferrule Quantity Number UNEF 2B Max Max Max Max Ser Ser I II Standard 09 09 08 0.4375”-28 19.0 17.5 22.5 30.5 1 [0.75”] [0.69”] [0.98] [1.20”] 11 11 10 0.5625”-24 22.0 21.5 24.0 32.0 2 [0.87”] [0.85”] [0.94] [1.26”] 13 13 12 0.6875”-24 25.5 22.5 26.0 34.0 3 [1.00”] [0.89”] [1.02”] [1.34”] PART NUMBERING © 2008 Tyco Electronics. All rights reserved. TITLE: HEXASHIELD ADAPTOR FOR Raychem CODE 41 CONNECTORS Wire and Harnessing Products 300 Constitution Drive PLAIN CLAMPING NUT Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DOCUMENT NO. Tyco Electronics reserves the right to amend this drawing at DIMENSIONS ARE IN MILLIMETERS. any time. Users should evaluate the suitability of the INCH DIMENSIONS ARE SHOWN IN HEX41L-KC-90-YY-AY-1 product for their application. BRACKETS DRAWN: DATE: CAGE CODE: DCR # FILE: SCALE: SHEET: IRT JAN 08 06090 87004/41L-90 NONE 2 OF 3 ECO-08-019355 If this document is printed it becomes uncontrolled. Check for the latest revision. REV: DATE: CUSTOMER DRAWING A Aug 21, 2008 APPLICATION - These adaptors are designed to be mounted on the following connectors: MIL-DTL-38999 Series I and II - They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular connectors only. - They are designed primarily for open wire bundle installation but are also designed to accept Raychem heat shrink moulded parts where strain relief is required – see illustration. MOULDED PART - Use in conjunction with ferrules HET-A-0XX, which are purchased separately. Refer to HET-A-0XX S.C.D. for relevant selection details. INSTALLATION -See Installation Procedure RPIP-696-04 (straight bodies) or RPIP-696-07 (45º and 90º bodies) for assembly. -See Installation Procedure RPIP-696-00 for shield termination. PACKAGING - All components are supplied in a plastic bag. NOTES! supplied with Hexashield Order Number 09. 1. Item 4 - Star - is not 2. Assembly is to be permanently marked with Code Identity Number and Part Number. (e.g. 06090 HEX41L-KC-90-09-A1-1) © 2008 Tyco Electronics. All rights reserved. TITLE: HEXASHIELD ADAPTOR FOR Raychem CODE 41 CONNECTORS Wire and Harnessing Products 300 Constitution Drive PLAIN CLAMPING NUT Menlo Park, CA 94025, USA UNLESS OTHERWISE SPECIFIED DOCUMENT NO. Tyco Electronics reserves the right to amend this drawing at DIMENSIONS ARE IN MILLIMETERS. any time. Users should evaluate the suitability of the INCH DIMENSIONS ARE SHOWN IN HEX41L-KC-90-YY-AY-1 product for their application. BRACKETS DRAWN: DATE: CAGE CODE: DCR # FILE: SCALE: SHEET: IRT JAN 08 06090 87004/41L-90 NONE 3 OF 3 ECO-08-019355 If this document is printed it becomes uncontrolled. Check for the latest revision.