TE CONNECTIVITY HS032BK1TS038S-CS7833

HS/HC COMPUTERISED HEAT-SHRINK INDENTIFICATION Technical Datasheet TTDS-033 Revision 8 - October 2015 HS/HC Heat shrink markers are a range of flattened tubes arrange for easy printing through a selection of printers, carrier automated, notation on Manufactured using a specially developed radiation cross-linked, flame retarded material. Thin wall, flame retarded radiation cross-linked polyolefin heat-shrinkable tubing, assembled as organized cut sleeves on a paper carrier. HS products are 2:1 shrink ratio. HC products are 3:1 shrink ratio. HS/HC Heat Shrink Identification Marker Sleeving is available as part of a complete identification system. The system comprises specific printers, thermal transfer ribbons and WINTOTAL software. Laser markable using industrial YAG laser PAGE 1 RAIL /// TTDS-033 HS/HC HEAT-SHRINK IDENTIFICATION HS/HC HEAT-SHRINK IDENTIFICATION Features Temperature Rating • HS Available in sizes 2.4 up to 38.1 • Operating Temperature –55°C to 135°C (-67°F to 275°F). • HC Available in sizes 2.4 up to 39.0 • Computer based printing system • Excellent resistance to common industrial fluids, as described in RW-2539 Applications Design For Environment • Pre-Termination wire and cable identification. • The compound used for this product meets all current RoHS and REACH legislation. • Identification of wire or cable diameters 1.4 to 16mm (0.055 to 0.63 inches). • Further information and a downloadable • Rail declaration covering RoHS and REACH compliance can be found at the ‘TE Product • Military and Aerospace Compliance Support Centre’: • Electronics, Mass transit and general Industrial uses. http://www.te.com/usa-en/utilities/product- compliance.html Specifications / Approvals TE Connectivity Standard RW-2539 Military AMS-DTL-23053/5 Class 1 - HS and HC product (except HC dimensions) MIL 202 Method 215 - Resistance to Solvents SAE AS5942 - Marking for Electrical Materials Aerospace BS 4G 198 Part 3 - Resistance to fluids Where possible, TE has tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit, form and function. Further details can be found in TE standard RW-2539. PAGE 2 RAIL /// TTDS-033 HS/HC HEAT-SHRINK IDENTIFICATION HS/HC HEAT-SHRINK IDENTIFICATION Ordering Information Part Description HS 032 WE 2 TS 050 S S Pack Size 050 Sleeve Length TS Format 2 Number of pieces per sleeve length WE Sleeve Color 032 Sleeve Size HS Product Family Options Color Codes Pre-Scoring Code Tube Color Code Tube Color Perforated or cut score to produce multiple marker WE White GN Green sleeves per sleeve length YW Yellow BE Blue Not Scored Code 1 RD Red VT Violet 1 Score Code 2 2 Scores Code 3 OE Orange GY Grey BN Brown BK Black Sleeve length 38mm Code 038 Sleeve Size Options (supplied diameter) 50mm Code 050 Code HS Code HC 024 2.4mm 024 2.4mm Format 032 3.2 030 3.0 Dot matrix single sided Code NF 048 4.8 050 5.0 Dot Matrix Double sided Code DS 064 6.4 060 6.0 Thermal transfer single sided Code TS 095 9.5 090 9.0 Thermal transfer double sided Code DT 127 12.7 120 12.0 Pack Sizes ¹ 190 19.0 180 18.0 Code B = Bulk Pack 254 25.4 240 24.0 Dot Matrix Only Code X = Extra large 381 38.1 390 39.0 Code S = Standard Thermal Transfer Only PAGE 3 ¹Number of sleeves is dependant on tube size RAIL /// TTDS-033 HS/HC HEAT-SHRINK IDENTIFICATION HS/HC HEAT-SHRINK IDENTIFICATION Printer Information Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document 411-121005 ‘Identification Printer Product Rib- bon Matrix’. This document can be found in ‘Access Our Tools’: http://www.te.com/usa-en/utilities/access-product-tools- Software WINTOTAL¹ software, available to download for a 14 day evaluation period from the Identification Printer Software page: http://www.te.com/usa-en/products/identification-labeling/ printers-software.html Contact a TE representative for further information ¹WINTOTAL 5.4.04 must be used for Dot Matrix printing www.te.com/rail TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connec- tivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. PAGE 4 RAIL /// TTDS-033 HS/HC HEAT-SHRINK IDENTIFICATION