TE CONNECTIVITY KUMP14A1812

General Purpose Panel/Plug-in Relays P Pott otter & Brumfield er & Brumfield KUMP Series Panel Plug-in Relay n 15 amp rating n Contact arrangements 1-3 form A, 1-3 form B, 1-3 form C, 1 form X, 1 form Y, 1 form Z n Open or enclosed n Plain or bracket mount dust covers n Optional indicator lamp and push-to-test button n Several termination and mounting styles Typical applications Hospital beds, semiconductor wafer equipment, boom/bucket lifts. Coil versions, AC coil Approvals Coil Rated Operate Coil Rated coil UL E22575; CSA LR15734 Technical data of approved types on request. code voltage voltage resistance power VAC VAC Ω±15% VA 6 6 5.1 4.2 2.8 Contact Data 12 12 10.2 18 2.8 Contact arrangement 1, 2 and 3 form A (NO); 1, 2 and 3 form B (NC); 24 24 20.4 72 2.8 1, 2 and 3 form C (CO); 1 form X (NO-DM); 120 120 102.0 1700 2.9 1 form Y (NC-DB); 1 form Z (CO-DB-DM) 240 240 204.0 7200 2.9 Rated voltage 277VAC All figures are given for coil without preenergization, at ambient temperature +23°C. Rated current 15A Contact material AgCdO AgSnOInO Min. recommended contact load 300mA, 12VDC 300mA, 12VDC Insulation Data Frequency of operation 360 ops./hour 360 ops./hour Initial dielectric strength Operate/releases time max. 15/10ms between open contacts 1200V Bounce time max. 17ms rms between contact and coil 2200V rms between adjacent contacts 2200V rms Contact ratings Initial insulation resistance Type Load Cycles between insulated elements 100MΩ, 500VDC UL 508 AgCdO Other Data 15A, 277VAC Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 1/2HP, 120VAC refer to the Product Compliance Support Center at 10A, 240VAC www.te.com/customersupport/rohssupportcenter 10A, 32VDC Ambient temperature 5FLA, 15LRA, 250VAC DC coil Enclosed relays: -45ºC to 70ºC 5A, 120VAC, tungsten Open relays: 15ºC higher maximum 0.5A, 250VAC AC coil Enclosed relays, 3 pole: -45°C to +45°C 0.5A, 125VDC Enclosed relays, 1 and 2 pole: -45ºC to +55ºC 10FLA, 40LRA, 125VAC Open relays: 15°C higher maximum 3A, 600VAC Category of environmental protection 1/2HP, 480VAC IEC 61810 RT0 - open relay; RTI - dust protected 1/2HP, 600VAC Terminal type Quick connects (QC), .187, .205 or .250: 1HP, 480VAC, 3 phase PCB-THT AgSnOInO 3 Terminal retention, push force 15A, 277VAC, pf = 0.8 15x10 3 QC .205 17 lbs for 3s 10A, 277VAC, pf = 0.8 100x10 6 QC .187, QC .250, PCB 25 lbs for 3s Mechanical endurance 10x10 ops. Weight 85g Packaging/unit tray/25 pcs., box/150pcs. Coil Data Coil voltage range 5 to 110VDC Accessories 6 to 240VAC For details see datasheet Sockets and Accessories, KUP Relays Coil insulation system according UL Class B Coil versions, DC coil Product Code Description Coil Rated Operate Coil Rated coil 27E893 DIN socket (use 20C318 clip) code voltage voltage resistance power 27E121 Track mount socket (use 20C314 clips) VDC VDC Ω±10% W 27E043 Chassis mount/solder eyelet socket (use 20C254 clip) 5 5 3.75 21 1.2 27E046 Chassis mount/PCB socket (use 20C254 clip) 6 6 4.5 32.1 1.125 27E067 Chassis mount/quick connect socket (use 20C254 clip) 12 12 9.0 120 1.2 27E396 Snap-in/quick connect socket (use 20C254 clip) 24 24 18.0 472 1.25 48 48 36.0 1800 1.3 110 110 82.5 10000 1.25 All figures are given for coil without preenergization, at ambient temperature +23°C. 1 03-2015, Rev. 0315 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2015 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions General Purpose Panel/Plug-in Relays Potter & Brumfield KUMP Series Panel Plug-in Relay (Continued) Dimensions Seated Heights For KUM (open) Relays KUM bracket type 1.391” (35.33mm) for #6-32 stud with .218” (5.54mm) locating tab. 2.43 MAX.* 1.437 (61.72) .19 (36.50) 2.33 MAX.** (4.8) X X (59.18) 1.52” (38.6mm) for bracket 2.29 MAX.*** (58.17) with 2-#6 32 tapped holes. .63 .63 X (16.0) (16.0) 2.27 MAX.* 1.282” (32.56mm) for #6-32 tapped core (57.7) 2.171 MAX.** with .125” (3.18mm) or .218” (5.54mm) locating tab. (2) #6-32 THREAD .16 (55.14) (4.1) TAPPED HOLES 2.125 MAX.*** (53.98) 2.046” (51.97mm) for relay KUM stud type with printed circuit terminals. 1.468 MAX. (37.29) . 2.27 MAX.* .031 REF. .031 REF (57.7) (.79) (.79) STUD TYPE also available with .125” (3.18mm) 1 2 3 2.171 MAX.** (55.14) 4 5 6 tab, as well as without stud and locating tab. 2.125 MAX.*** 1.282 MAX. 1.391 7 8 9 (53.98) (35.56) Models without stud have core tapped #6-32 (35.33) .218 1.687 MAX. .109 MAX. AB (42.85) (5.54) THREAD, .25” (6.4mm) minimum depth. (2.77) .31 1.39 MAX.* (7.9) .065 (35.3) *Dimensions with .250” (6.35mm) terminals. .150 (1.65) .437 1.29 MAX.** #6-32 TAB WIDTH (32.8) (11.10) THREAD ** Dimensions with .110” (2.79mm) or .205”(5.21mm) terminals. (3.81) 1.25 MAX.*** (31.8) *** Dimensions with .187” (4.75mm) terminals. KUMP plain case KUMP core / stud mount case .288 .187 (4.75) DIA. 1.968 MAX.† X (49.99) (7.32) PUSH-TO-TEST BUTTON 1.906 MAX.‡ AVAILABLE (48.41) 1.531 MAX. .219 MAX. 1.43 MAX. (38.89) .130 (36.27) (5.56) 1.968 MAX.† (3.30) 1 2 3 1.74 MAX. (49.99) 4 5 6 (44.2) 1.906 MAX.‡ 1.406 MAX. 7 8 9 (48.41) (35.71) X STUD with A B #6-32 THREAD .312 1.39 MAX.* or CORE TAPPED (7.92) #6-32 (35.3) X 1.29 MAX.** X .437 .010 (32.8) (11.10 .25) X 1.25 MAX.*** (31.8) X Is For Terminal Dimensions. See Teminal Drawings. KUMP top flange case 1.518 MAX. .078 TYP . (38.56) (1.98) † Dimensions with .250” (6.35mm) terminals. 1 2 3 1.713 ± .003 ‡ Dimensions with .187” (4.75mm and .205” 5.21mm) terminals. 4 5 6 (43.51 ± .08) 7 8 9 1.373 ± .010 1.989 ± .003 *Dimensions with .250” (6.35mm) terminals. (34.87 ± .25) (50.52) AB ** Dimensions with .110” (2.79mm) or .205”(5.21mm) terminals. *** Dimensions with .187” (4.75mm) terminals. 2.248 MAX. .178 TYP. (57.10) (4.52) KUMP bracket mount case KUMP stud on end case .312 2.90 MAX. 1.968 MAX. † .078 R. TYP . .625 TYP . PUSH-TO-TEST BUTTON TYP . .38 (73.7) (49.99) (1.98) (15.88) AVAILABLE (7.92) X (9.7) 1.906 MAX. ‡ (48.41) .085 MAX. .75 (2.16) (19.1) 1.531 MAX. (38.89) .06 (1.52) X X 1.968 MAX.† .375 (49.99) (9.53) .437 #6-32 THREAD .07 2.500 1.906 MAX.‡ (11.10) .16 (1.8) (63.50) (48.41) (4.1) 2 03-2015, Rev. 0315 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2015 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions 1.406 MAX. (35.71) 1.128 (28.65) General Purpose Panel/Plug-in Relays Potter & Brumfield KUMP Series Panel Plug-in Relay (Continued) Relay front diagrams Models with 6.35mm Models with all other terminals (.250) QC terminals 1.531 MAX. 1.531 MAX. (38.89) (38.89) 1 2 3 1 2 3 4 5 6 4 5 6 1.406 MAX. 7 9 1.406 MAX. 7 8 9 (35.71) (35.71) B A AB Terminal dimensions 4.75mm (.187) quick connect 5.21mm (.205) quick connect 1.19mm (.047) printed circuit 6.35mm (.250) quick connect .125 .156 .093 .035 .093 .156 (2.36) (3.18) (3.96) (2.36) (.89) .125 DIA. (3.96) (3.18) .187±.002 .205± .002 .250 ± .003 HEADER .180 HEADER HEADER (4.75±.05) (5.21± .05) HEADER (4.57) (6.35 ± .08) .250 .078 .035 .106 .285 (6.35) .237 (1.98) .156 (.89) (7.24) (2.69) (6.02) .305 281 REF. (3.96) .312 .047 .316 REF. .268 REF. (7.14) (7.75) (7.92) .020 (8.03) (1.19) .358 REF. (6.81) THICKNESS .032 (.51) THICKNESS .032 (9.09) .032 (.81) THICKNESS THICKNESS (.81) (0.81) Terminal assignment 1 form Z 1 form C 2 form C 3 form C 1 form X (delete 1 & 3) 1 form A (delete 2) 2 form A (delete 1 & 3) 3 form A (delete 1, 2 & 3) 1 form Y (delete 4 & 6) 1 form B (delete 5) 2 form B (delete 4 & 6) 3 form B (delete 4, 5 & 6) 1 3 2 1 3 1 2 3 6 4 4 6 4 5 6 5 7 9 7 8 9 7 AB A B A B A B PCB layout Bottom view on solder pins 1 form Z version 3 pole version (Omit unnecessry holes for (Omit unnecessry holes for form X and Y types) form A and 2 pole types) .206 .206 .076 DIA. TYP. .076 DIA. TYP. (5.23) (5.23) (1.93) (1.93) .328 (8.33) .626 .626 (15.90) (15.90) .875 .437 (22.23) (11.10) .875 (22.23) 3 03-2015, Rev. 0315 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2015 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions General Purpose Panel/Plug-in Relays Potter & Brumfield KUMP Series Panel Plug-in Relay (Continued) Product code structure Typical product code KUMP -11 A 1 8 -120 Type KUM 15A open style relay KUMP 15A enclosed relay Contact arrangement 1 1 form A (1 NO) 2 1 form B (1 NC) 3 1 form X (1 NO-DM) 4 1 form Y (1 NC-DB) 5 1 form C (1 CO) 6 1 form Z (1 CO-DB-DM) 7 2 form A (2 NO) 8 2 form B (2 NC) 11 2 form C (2 CO) 12 3 form A (3 NO) 13 3 form B (3 NC) 14 3 form C (3 CO) Coil Input A AC, 50/60Hz D DC Mounting and options KUM 1 #6-32 mounting stud, 5.54mm (.218in) locating tab 2 2-hole bracket, #6-32 tapped 3 #6-32 tapped core, 3.18mm (.125in) locating tab 4 #6-32 tapped core, 5.54mm (.218in) locating tab 5 #6-32 tapped core, no locating tab KUMP 1 Socket mount (plain) case 2 Socket mount (plain) case with push-to-test button 1) 3 Socket mount (plain) case with indicator lamp 1) 4 Socket mount (plain) case with indicator lamp and push-to-test button 5 Bracket mount case 6 Bracket mount case with push-to-test button 1) 7 Bracket mount case with indicator lamp 1) 8 Bracket mount case with indicator lamp and push-to-test button 9 Plain case with #6-32 stud and locating tab on end of case A Plain case with #6-32 stud and locating tab B Plain case with #6-32 stud and locating tab, push-to-test button 1) C Plain case with #6-32 stud and locating tab, indicator lamp 1) D Plain case with #6-32 stud and locating tab, push-to-test button and indicator lamp E Plain case with #6-32 tapped core and locating tab F Plain case with #6-32 tapped core and locating tab, push-to-test button 1) G Plain case with #6-32 tapped core and locating tab, indicator lamp 1) H Plain case with #6-32 tapped core and locating tab, push-to-test button and indicator lamp T Top flange case 1) Indicator lamps are available on models with the following coils: 6-24VAC and VDC, 110VDC and 120-240VAC. Only models with 120-240VAC coils are UL recognized. Terminal and contact material 6 5.21mm (.205in) quick connect/solder; AgCdO 8 4.75mm (.187in) quick connect/solder; AgCdO 2) 9 1.19mm (.047in) PCB, AgCdO G 6.35mm (.250in) quick connect/solder; AgCdO R 5.21mm (.205in) quick connect/solder; AgSnOInO T 4.75mm (.187in) quick connect/solder; AgSnOInO 2) U 1.19mm (.047in) PCB, AgSnOInO V 6.35mm (.250in) quick connect/solder; AgSnOInO 2) 6.35mm (.250in) quick connect/solder terminals are not available on 3 pole relays Coil voltage Coil code: please refer to coil versions table Product Code Arrangement Material Coil Terminals Mounting Part Number KUMP-11A18-24 2 form C; 2 CO AgCdO 24 VAC 4.75mm (.187in) QC Socket mount, plain case 6-1393116-3 KUMP-11A18-120 120 VAC 6-1393116-2 KUMP-11A18-240 240 VAC 6-1393116-4 KUMP-11D18-12 12 VDC 7-1393116-1 KUMP-11D18-24 24 VDC 7-1393116-2 KUMP-11D18-110 110 VDC 7-1393116-0 KUMP-14A18-24 3 form C, 3 CO 24 VAC 8-1393116-5 KUMP-14A18-120 120 VAC 8-1393116-4 KUMP-14D18-12 12 VDC 9-1393116-0 KUMP-14D18-24 24 VDC 9-1393116-1 4 03-2015, Rev. 0315 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2015 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions