TE CONNECTIVITY SO63-3-9036-22

CUSTOMER DRAWING Product Dimensions Product A±1.75 Mark øB øC Name [A±0.070] min min SO63-1-9036-22 16.50 1.90 2.65 SO63-1-9036-20 SO631R [0.650] [0.075] [0.105] SO63-1-9036-18 SO63-2-9036-22 16.50 2.65 3.55 SO63-2-9036-20 SO632R [0.650] [0.105] [0.145] SO63-2-9036-18 SO63-3-9036-22 16.50 4.30 5.00 SO63-3-9036-20 SO633R [0.650] [0.170] [0.200] SO63-3-9036-18 SO63-4-9036-22 19.10 5.95 6.50 SO63-4-9036-20 SO634R [0.750] [0.235] [0.255] SO63-4-9036-18 SO63-5-9036-22 19.10 7.00 7.60 SO63-5-9036-20 SO635R [0.750] [0.275] [0.300] SO63-5-9036-18 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. Marked per table. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR RING: SOLDER: TYPE Sn63 per ANSI / J-STD-006. FLUX: TYPE ROL1 per ANSI / J STD-004. TERMAL INDICATOR RING: Fusible alloy with melt point of 221°C. 3. MELTABLE RINGS: Environment resistant fluorocarbon-based thermoplastic 4. PRE-INSTALLED LEAD: Raychem 55PC6121-GA. “GA”=size (AWG) of lead, color: white with 2 black stripes. APPLICATION 1. These parts are designed to provide an environment resistant shield termination on cables, rated for 125C min. having tin or silver-plated shields, and jackets compatible with the insert material. See M83519/2 or consult TE Connectivity. 2. When properly installed, these parts will meet the performance requirements of Raychem RT-1404 and SAE-AS-83519/2. 3. Part selection: Measure cable jacket diameter at its maximum point. Select the smallest terminator that has a “B” diameter larger than the cable diameter. 4. Cable is to be stripped to expose 6.0 -7.5mm [0.235-0.295] of shield. 5. Part may be installed using any Raychem approved convection or infra-red heating tool. Tools must be equipped with a suitable reflector. For detailed assembly instruction see Raychem RCPS-100-70. TITLE: SOLDERSLEEVE DEVICE WITH Raychem PRE-INSTALLED LEAD, IMMERSION RESISTANT Devices . DOCUMENT NO.: Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] SO63-X-9036-GA TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to amend 0.00 N/A this drawing at any time. Users should evaluate REV.: DATE: 0.0 N/A ROUGHNESS IN the suitability of the product for their B 17-Feb-2017 0 N/A MICRON application. PREPARED BY: ECO NUMBER: REPLACES: CAGE CODE : SCALE: SIZE: SHEET: mforonda D060206 06090 --- A 1 of 1 ECO-17-002137 © 2005-2017 TE Connectivity Corporation. All rights reserved. SolderSleeve is a trademark of Tyco Electronics Corporation If this document is printed it becomes uncontrolled. Check for the latest revision.