SSRK Series Solid State Relays SSRK series 10-30A DIN Mount Solid State Relay With Paired SCR Output, Integral Heatsink File E29244 File LR246041 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to confirm the product meets the requirements for a given application. Engineering Data Features Form: 1 Form A (SPST-NO). • Narrow (22.5mm), DIN mount design with integral heatsink. Duty: Continuous. • Choice of 10, 20 or 30A rms inverse-parallel connected SCR output. Isolation: 4,000V rms input-to-output-to-ground. • 48 - 660VAC output. 9 Insulation Resistance: 10 Ohms, minimum, at 500VDC. • 4 -32VDC or 90 - 280Vrms input control. Capacitance: 8.0 pf maximum (input to output). • 4,000V rms optical isolation. Temperature Range: • Green LED input status indicator. Storage: –40°C to +125°C • Finger-safe (IP20) screw clamp terminals for load and control. Operating: –40°C to + 80°C • Ground terminal. Case and Mounting: Refer to outline dimension drawing. Termination: Load & Control: Finger safe (IP20) screw clamps accepting wire size up to #10 AWG (3 mm). Ground: #10 screw with 5/16 in. hex/slottted head. Installation Spacing: Minimum 0.8 in (20 mm) space between units. Approximate Weight: 9.9 oz. (284 g). Ordering Information Sample Part Number SSRK -600 A 30 1. Basic Series: SSRK = Slim Solid State Relay with Integral Heatsink for DIN Rail Mounting 2. Line Voltage: 600 = 48 - 660 VAC 3. Input Type & Voltage: A = 90 - 280VAC D = 4 - 32VDC 4. Maximum Switching Rating/Output: 10 = 10.0A rms 20 = 20.0A rms 30 = 30.0A rms Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRK-600A10 SSRK-600A20 SSRK-600A30 SSRK-600D10 SSRK-600D20 SSRK-600D30 Input Specifications Parameter Conditions AC Control Units DC Control Units 90 - 280 Vrms 4.0 - 32 VDC Control Voltage Range V IN @ 25°C Must Operate Voltage V (Min.) 90 Vrms 4.0 VDC @ 25°C IN(OP) Must Release Voltage V (Min.) @ 25°C 10 Vrms 1.0 VDC IN(REL) Input Current Range (Typ.) @ 25°C 2 mA @ 120 Vrms, 4 mA @ 240 Vrms 8 - 12 mA Revised 3-10 Dimensions are in inches over Dimensions are shown for reference USA: 1-800-522-6752 South America: 55-11-2103-6000 www.tycoelectronics.com (millimeters) unless otherwise purposes only. Specifications and Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. availability subject to change. Mexico: 01-800-733-8926 Japan: 81-44-844-8013 1 1 C. America: 52-55-1106-0803 UK: 44-8706-080208 I N P U T S SSRK Series Solid State Relays Output Specifications (@ 25° C, unless otherwise specified) Parameter Conditions Units 10A Rated Units 20A Rated Units 30A Rated Units Load Voltage Range V f = 47-63 Hz. L V rms 48-660 48-660 48-660 Repetitive Blocking Voltage (Min.) V peak ±1200 ±1200 ±1200 Load Current Range I * 0.15 - 10.0 0.15 - 20.0 0.15 - 30.0 A rms L Single Cycle Surge Current (Min.) A peak 120 250 625 Leakage Current (Off-State) (Max.) mA rms 1.0 1.0 1.0 f = 60 Hz. V = 600Vrms L On-State Voltage Drop (Max.) I = Max. V peak 1.6 1.6 1.6 L 500 500 500 Static dv/dt (Off-State) (Min.) V = Max. V/μs L Turn-On Time (Max.) f = 60 Hz. ms 8.3 for DC Input Models, 10.0 for AC Input Models Turn-Off Time (Max.) 8.3 for DC Input Models, 40.0 for AC Input Models f = 60 Hz. ms 2 2 A Sec. 60 260 1,620 I t Rating (Max.) t = 8.3 ms Load Power Factor Rating (Min,) I = Max. 0.5 0.5 0.5 L *See Thermal Derating Curves. Electrical Characteristics (Thermal Derating Curves) Outline Dimensions MOUNTING HOLE 30 0.17 (4.3) DIA. 30A Rated Units 25 4/A2 +3/A1 3.5 20 (88.9) 20A Rated Units 15 3.2 (81.9) 10 2.6 10A Rated Units (66.0) OUTPUT 5 1/L1 2/T1 0 0 20 40 60 80 .5 Ambient Temperature (°C) (12.7) MOUNTING SLOT 0.17 x 0.20 (4.3 x 5.1) 3.2 .890 (22.5) (81.3) 3.9 (99.0) BLACK Disclaimer ANODIZED ALUMINUM While Tyco Electronics has made every reasonable effort to ensure the HEATSINK accuracy of the information in this document , Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics Recommended Torque Range for Terminal Screws: 5 - 6 in lb (0.6 - 0.7 Nm). expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult Tyco Electronics for the latest dimensions and design specifications. © 2010 by Tyco Electronics Corporation. All Rights Reserved. TE logo and Tyco Electronics are trademarks. Catalog 8-1773454-4 Dimensions are in inches over Dimensions are shown for reference South America: 55-11-2103-6000 USA: 1-800-522-6752 Revised 3-10 (millimeters) unless otherwise purposes only. Specifications and Hong Kong: 852-2735-1628 Canada: 1-905-470-4425 specified. availability subject to change. Japan: 81-44-844-8013 Mexico: 01-800-733-8926 2 www.tycoelectronics.com UK: 44-8706-080208 C. America: 52-55-1106-0803 T A T U S Ouput Current (Arms)