TE CONNECTIVITY T9SV1K15-12

General Purpose Relays Power Relays Potter & Brumfield Power PCB Relay T9S Solar n 1 pole 35A, 1 form A (NO) contact n Contact gap >1.5mm (standard), >1.8mm (suffix S) n 350mW hold power n Ambient temperature up to 85°C at 35A n The appliance is able to meet VDE V 0126-1-1 n Product in accordance to IEC 60335-1 n EN61095: AC7a at 85°C Typical applications f0156_bc_inv Photovoltaic inverter U Approvals Insulation Data VDE 40030974, UL E58304 Initial dielectric strength Technical data of approved types on request between open contacts 2500V rms between contact and coil 4000V rms Contact Data Initial surge withstand voltage Contact arrangement 1 form A (NO) between contact and coil 6kV Contact gap >1.5mm (standard), >1.8mm (suffix S) Clearance/creepage Rated voltage 250VAC (1.8mm gap), 277VAC (1.5mm gap) between contact and coil 3/4mm 1) Rated current 35A Material group of insulation parts III Breaking capacity max. 8750 VA Tracking index of relay base PTI 325 Contact material AgNi Initial contact resistance 75mΩ max. at 1A 6VDC -1 Frequency of operation, with/without load 6/300min Other Data Operate/release time max., incl bounce time 18/15ms Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at 2) Contact ratings www.te.com/customersupport/rohssupportcenter 1) Type Contact Load Cycles Ambient temperature -40 to +85°C IEC 61810 Category of environmental protection 3 T9SV1K15-12 A (NO) 35A, 250VAC, cosφ=1, 85°C 30x10 IEC 61810 RTII - flux proof 3 T9SV1K15-12S A (NO) 35A, 250VAC, cosφ=1, 85°C 20x10 Vibration resistance (functional) 10g UL 508 Shock resistance (functional) 10g 3 T9SV1K15-12 A (NO) 35A, 277VAC, resistive, 85°C 30x10 Shock resistance (destructive) 100g 3 T9SV1K15-12S A (NO) 35A, 250VAC, resistive, 85°C 20x10 Terminal type PCB-THT 1) Mounting see note 5 Mechanical endurance, DC coil 5x10 operations Mounting distance ≥10mm 1) The relay connections and wiring have to be designed with an adequate cross sections Weight appr. 30g to ensure the current flow and heat dissipation. Resistance to soldering heat THT 2) Contact ratings with relay properly vented. IEC 60068-2-20 260°C/5s Packaging unit box/500 pcs. 1) The relay connections and wiring have to be designed with an adequate cross sections Coil Data to ensure the current flow and heat dissipation. Rated coil voltage 12VDC Coil insulation system according UL class F Coil versions, DC coil Coil Rated Operate Release Coil Rated coil code voltage voltage voltage resistance power VDC VDC VDC Ω±10% W 3) 12 12 9.6 0.8 64+10% 2.25 / min. 0.35 hold 3) After the energization time of 100 ms with 12 VDC the coil requires a reduction of the coil voltage to 4.7...6.0 VDC. All figures are given for coil without pre-energization, at ambient temperature +23°C. Other coil voltages on request. 1 01-2018, Rev. 0118 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions General Purpose Relays Power Relays Potter & Brumfield Power PCB Relay T9S Solar (Continued) Dimensions PCB layout / terminal assignment Bottom view on solder pins Notes 1) General tolerance Diagram Dimension Tolerance < 1 mm ±0.1 1 ~ 3 mm ±0.2 > 3 mm ±0.3 2) Dimensions of the pins after tin soldering a) +0.4 for the width and the thickness b) +1.0 for the length Product code Version Contact arrangement Contact material Contact gap Coil Part Number T9SV1K15-12 PCB, flux tight 1 form A (NO) contact AgNi >1.5mm 12VDC 2027395-1 T9SV1K15-12S PCB, flux tight 1 form A (NO) contact AgNi >1.8mm 12VDC 2027395-3 2 01-2018, Rev. 0118 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions