Manufacturers
TE CONNECTIVITY TXR40AB00-2405AI
Description
Shrink Boot Adapters 180 24 Shell Size Cadmium Over Electroless Nickel Aluminum Alloy
TXR40AB00-2405AI
Part Number
TXR40AB00-2405AI
Price
Request Quote
Manufacturer
TE CONNECTIVITY
Lead Time
Request Quote
Category
Connectors » Shrink Boot Adapters
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
TXR40AB00-2405AI
Lead Time
7 Week Lead Time
Industry Aliases
138667-000, TXR40AB00-2405AI
Sub-Category
Shrink Boot Adapters
Brand
Raychem Wire and Tubing
Factory Pack Quantity
1
Datasheet
DDEController?Action=showdoc&DocId=Customer+Drawing%7FTXR40%7FJ%7Fpdf%7FEnglish%7FENG_CD_TXR40_J.pdf
1155 KiB
Extracted Text
ASSY USED ON: TINEL LOCK RING 3 CODE 40 - TINEL-LOCK BACKSHELL TXR40AB00-1608AI-S SERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE DASH NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE REFER TO CH00-0250-008 2 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR40AB00-1206). RING SHALL BEAR NO MARKING. 5. FOR LARGER ENTRY SIZES, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO MIL-DTL-38999, SERIES III AND IV, CLASS C, F, K, AND W, D38999/20, /24, /26, /40, /46 AND /47 CONNECTORS, AND WHEN SO MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF MIL-C-85049, PARA. 3. 5. 7. 7. THESE DIMENSIONS APPLY IF A SELF-LOCKING COUPLING NUT IS USED. DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 04/12/2014 NOT TO CHECKED 04/12/2014 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 04/12/2014 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 15/06/2015 ANGULAR +/- 1° REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-38999 SERIES III & IV H.SMITH K 11.02.15 REVISED PER ECO-15-002200 D.JONES L REVISED PER ECO-17-009011 21.06.17 TE CONNE CTIVITY - POLAM CO LTD RE SE RV ES TH E RIGH T TO AM E ND TH IS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORM ATIO N SET FORTH HE RE ON AT ANY T IM E . USE RS SH OULD IND EPENDE NTLY E VALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. TXR40 L 1 POLAMCO/TE CAGE CODE: U5792 G D ASSY USED ON: IF MAX ENTRY IS EXCEEDED BACKSHELL ALTERNATIVE ALTERNATIVE WILL BE SUPPLIED AS TYPE 2 PROFILE PROFILE 16,80 `0,50 26,50 26,50 PART MARK 5 PART MARK HERE HERE STRAIGHT BACKSHELL - TYPE 2 STRAIGHT BACKSHELL - TYPE 1 C 16,80 `0,50 F 45° BACKSHELL - TYPE 1 45° BACKSHELL - TYPE 2 H W 16,80 `0,50 M T 90° BACKSHELL - TYPE 2 90° BACKSHELL - TYPE 1 H W 16,80 `0,50 T M 90° BACKSHELL - TYPE 1 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE NICKEL ALUMINIUM BRONZE DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 04/12/2014 NOT TO CHECKED 04/12/2014 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 04/12/2014 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 15/06/2015 ANGULAR +/- 1° REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-38999 SERIES III & IV H.SMITH K 11.02.15 REVISED PER ECO-15-002200 D.JONES L REVISED PER ECO-17-009011 21.06.17 TE CONNE CTIVITY - POLAM CO LTD RE SE RV ES TH E RIGH T TO AM E ND TH IS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORM ATIO N SET FORTH HE RE ON AT ANY T IM E . USE RS SH OULD IND EPENDE NTLY E VALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. TXR40 L 2 POLAMCO/TE CAGE CODE: U5792 XXXX ØB A THREAD XXXX E ØZ ØS E ØY ØK ØB A THREAD J J ASSY USED ON: MODIFICATION S (SELF-LOCKING COUPLING NUT) 21,60 `0,50 SELF-LOCKING SELF-LOCKING MECHANISM SELF-LOCKING MECHANISM MECHANISM BACKSHELL - TYPE 1 BACKSHELL - TYPE 2 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE TABLE 1 ORDER SHELL SIZE ØB ØB MAX MAX C D W T E W T E A THREAD NO. COM'L / MIL MAX 7 ENTRY ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 08 9 / A M12 × 1.0 18,0 21,5 04 12,0 26,8 21,0 14,0 26,20 21,2 16,3 26,4 10 11 / B M15 × 1.0 21,0 24,6 07 12,5 27,5 24,0 15,5 27,95 24,3 17,2 28,2 24,5 28,3 13,1 28,0 27,0 17,0 29,45 28,3 19,4 29,7 12 13 / C M18 × 1.0 08 14 15 / D M22 × 1.0 29,0 32,4 10 13,5 29,0 31,0 19,5 31,00 31,1 21,0 31,2 32,5 35,6 14,5 29,7 34,0 21,0 32,70 34,2 22,8 32,9 16 17 / E M25 × 1.0 12 18 19 / F M28 × 1.0 35,5 38,5 14 15,5 30,5 35,0 20,0 34,25 38,5 25,3 34,5 20 21 / G M31 × 1.0 37,0 41,7 16 16,1 30,9 38,0 21,5 35,80 40,7 26,1 36,1 M34 × 1.0 40,0 43,9 18 16,5 31,1 42,0 24,0 37,40 43,7 27,6 37,6 22 23 / H 24 25 / J M37 × 1.0 43,5 47,0 20 17,0 32,1 45,0 25,5 38,90 46,4 29,1 39,1 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE TABLE 2 ØY F G H M J H M J ENTRY ØZ ØK ØK MAX ØS SIZE MIN ± 0,3 MAX 7 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 6,35 9,49 +/-0,04 14,00 04 NA NA NA NA NA NA NA NA NA NA 05 7,92 11,06 +/-0,04 15,50 21,0 24,6 12,5 27,5 24,0 15,5 27,95 24,3 17,2 28,2 9,53 12,66 +/-0,04 17,10 21,0 24,6 12,5 27,5 24,0 15,5 27,95 24,3 17,2 28,2 06 11,10 14,21 +/-0,07 18,70 21,0 24,6 12,5 27,5 24,0 15,5 27,95 24,3 17,2 28,2 07 12,70 15,81 +/-0,07 20,30 24,5 28,3 13,1 28,0 27,0 17,0 29,45 28,3 19,4 29,7 08 15,88 18,96 +/-0,08 23,50 29,0 32,4 13,5 29,0 31,0 19,5 31,00 31,1 21,0 31,2 10 12 19,05 22,14 +/-0,08 26,70 32,5 35,6 14,5 29,7 34,0 21,0 32,70 34,2 22,8 32,9 22,23 25,30 +/-0,08 29,80 35,5 38,5 15,5 30,5 35,0 20,0 34,25 38,5 25,3 34,5 14 16 25,40 28,48 +/-0,08 33,00 37,0 41,7 16,1 30,9 38,0 21,5 35,80 40,7 26,1 36,1 28,58 31,65 +/-0,08 36,20 40,0 43,9 16,5 31,1 42,0 24,0 37,40 43,7 27,6 37,6 18 20 31,75 34,83 +/-0,08 39,40 43,5 47,0 17,0 32,1 45,0 25,5 38,90 46,4 29,1 39,1 34,93 42,50 48,5 50,0 18,5 35,3 54,5 31,0 42,00 50,0 31,0 42,0 22 37,98 +/-0,08 38,10 41,15 +/-0,08 45,70 52,1 56,0 21,9 38,1 58,0 33,0 46,00 53,5 33,0 46,0 24 DATE 3RD ANGLE DRAWN K.WINCZURA TITLE: PROJECTION 04/12/2014 NOT TO CHECKED 04/12/2014 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 04/12/2014 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 15/06/2015 ANGULAR +/- 1° REVISIONS LTR DATE DESCRIPTION APPROVED MIL-DTL-38999 SERIES III & IV H.SMITH K 11.02.15 REVISED PER ECO-15-002200 D.JONES L REVISED PER ECO-17-009011 21.06.17 TE CONNE CTIVITY - POLAM CO LTD RE SE RV ES TH E RIGH T TO AM E ND TH IS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORM ATIO N SET FORTH HE RE ON AT ANY T IM E . USE RS SH OULD IND EPENDE NTLY E VALUATE TH E SUITABILITY OF THE PRODUCT FOR TH EIR APPLICATION. TXR40 L 3 POLAMCO/TE CAGE CODE: U5792 ØB 7 A THREAD ØK 7 ØB 7 A THREAD
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the TXR40AB00-2405AI?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Shrink Boot Adapters 180?? 8/8S Shell Size Cadmium Over Electroless Nickel Aluminum Alloy Spin 201M1...
Shrink Boot Adapters 180?? 8/8S Shell Size Cadmium Over Electroless Nickel Aluminum Alloy Spin 201M1...
Shrink Boot Adapters 180 8/8S Shell Size Cadmium Over Electroless Nickel Aluminum Alloy Spin 201M108...
Shrink Boot Adapters 180 10/10S/10SL Shell Size Cadmium Over Electroless Nickel Aluminum Alloy Spin ...
Cable Accessories Adapter Aluminum Alloy Olive Drab 201M110-19B
Shrink Boot Adapters 180 10/10S/10SL Shell Size Spin 201M110-19C
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods