TE CONNECTIVITY TXR64AB90-2418AI

ASSY USED ON: TINEL LOCK RING 3 CODE 64 - TINEL-LOCK BACKSHELL TXR64AB00-1608AI- SERIES TXR: RING INCLUDED (SEE RING OPTION) TX: RING NOT INCLUDED CONNECTOR INTERFACE MATERIAL REFER TO CH00-0250-008 FINISH REFER TO CH00-0250-008 ANGLE DASH NUMBER (TABLE 1) ENTRY SIZE (TABLE 2) RING OPTION AI - TO SUIT SINGLE BRAID BI - TO SUIT DOUBLE BRAID FOR TX, LEAVE BLANK MODIFICATION CODE 2 REFER TO CH00-0250-008 NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A BRAIDED CABLE SHIELD AND A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-008. 3. SEE DRAWING TR FOR DETAIL ON TINEL-LOCK RING, RINGS ARE DESIGNED TO BE HEATED ELECTRICALLY, ALL RINGS ARE MARKED WITH THERMOCHROMIC PAINT WHICH CHANGES COLOUR WHEN INSTALLATION TEMPERATURE IS REACHED. 4. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER LESS RING DESIGNATOR. (e.g. 06090-TXR64AB00-1406). RING SHALL BEAR NO MARKING. 5. IF MAX ENTRY IS EXCEEDED, A 2 PIECE BACKSHELL ASSEMBLY (TYPE 2) IS SUPPLIED. 6. BACKSHELL MATES TO VEAM "CIR" SERIES CONNECTORS, LESS ENDBELL. D A TE 3RD ANGLE D R AW N K.WINCZURA T I T L E : PROJECTION 16/12/2014 NOT TO CHECKED 16/12/2014 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 19/12/2014 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 17/07/2015 ANGULAR +/- 1° REVISIONS LTR DATE DESCRIPTION APPROVED VEAM "CIR" SERIES, LESS ENDBELL 18/02/2015 H.SMITH F REVISED PER ECO-15-002352 G REVISED PER ECO-15-010492 17/07/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. TXR64 G 1 POLAMCO/TE CAGE CODE: U5792 G D ASSY USED ON: IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 24,80`0,50 26,50 35,00 SILICONE O-RING PART MARK 5 HERE PART MARK HERE STRAIGHT BACKSHELL - TYPE 1 STRAIGHT BACKSHELL - TYPE 2 24,80`0,50 F C 45° BACKSHELL - TYPE 1 45° BACKSHELL - TYPE 2 H 24,80`0,50 W M T 90° BACKSHELL - TYPE 2 90° BACKSHELL - TYPE 1 H W 24,80`0,50 M T 90° BACKSHELL - TYPE 1 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE NICKEL ALUMINIUM BRONZE D A TE 3RD ANGLE D R AW N K.WINCZURA T I T L E : PROJECTION 16/12/2014 NOT TO CHECKED 16/12/2014 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 19/12/2014 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 17/07/2015 ANGULAR +/- 1° REVISIONS LTR DATE DESCRIPTION APPROVED VEAM "CIR" SERIES, LESS ENDBELL 18/02/2015 H.SMITH F REVISED PER ECO-15-002352 G REVISED PER ECO-15-010492 17/07/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. TXR64 G 2 POLAMCO/TE CAGE CODE: U5792 ØB A THREAD XXXX E ØZ E ØS ØY ØK ØB A THREAD XXX X J J ASSY USED ON: THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE TABLE 1 ORDER SHELL ØB MAX C D W T E W T E A THREAD ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 NO. SIZE MAX ENTRY MAX 11 10SL 5/8 - 24UNEF 23,1 05 20,3 27,5 29,7 22,0 26,50 30,2 22,0 28,2 26,4 21,3 28,0 32,8 23,8 27,95 33,3 23,8 28,2 14 14S 3/4 - 20UNEF 06 16 16, 16S 7/8 - 20UNEF 31,0 08 23,1 29,0 34,8 24,3 29,45 35,3 24,3 29,7 34,3 24,6 29,7 39,1 27,1 31,00 39,6 27,1 31,2 18 18 1 - 20UNEF 10 20 20 1 1/8 - 18UNEF 37,4 12 25,9 30,5 41,4 27,4 32,70 41,9 27,4 32,9 22 22 1 1/4 - 18UNEF 40,6 12 26,4 30,9 45,0 29,5 34,25 45,5 29,5 34,5 43,7 27,2 31,1 48,3 31,3 35,80 48,8 31,3 36,1 24 24 1 3/8 - 18UNEF 14 28 28 1 5/8 - 18UNEF 50,0 16 27,7 32,1 52,3 32,7 38,90 52,8 32,7 39,1 56,4 29,2 31,4 58,4 35,6 42,00 58,9 35,6 48,4 32 32 1 7/8 - 16UN 20 36 36 2 1/16 -16UNS 62,7 22 30,5 32,3 64,5 39,5 44,70 65,0 39,5 51,4 69,1 32,0 35,2 73,2 44,2 49,10 73,7 44,2 57,7 40 40 2 5/16 -16UNS 28 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE TABLE 2 ØY F G H M J H M J ENTRY ØZ ØK ØS SIZE MIN ±0,3 MAX ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 6,35 9,49 +/-0,04 14,00 04 NA NA NA NA NA NA NA NA NA 05 7,92 11,06 +/-0,04 15,50 NA NA NA NA NA NA NA NA NA 9,53 12,66 +/-0,04 17,10 21,0 12,5 27,5 24,0 15,5 27,95 24,3 17,2 28,2 06 07 11,10 14,21 +/-0,07 18,70 21,0 12,5 27,5 24,0 15,5 27,95 24,3 17,2 28,2 08 12,70 15,81 +/-0,07 20,30 24,5 13,1 28,0 27,0 17,0 29,45 28,3 19,4 29,7 15,88 18,96 +/-0,08 23,50 29,0 13,5 29,0 31,0 19,5 31,00 31,1 21,0 31,2 10 12 19,05 22,14 +/-0,08 26,70 32,5 14,5 29,7 34,0 21,0 32,70 34,2 22,8 32,9 22,23 25,30 +/-0,08 29,80 35,5 15,5 30,5 35,0 20,0 34,25 38,5 25,3 34,5 14 16 25,40 28,48 +/-0,08 33,00 37,0 16,1 30,9 38,0 21,5 35,80 40,7 26,1 36,1 28,58 31,65 +/-0,08 36,20 40,0 16,5 31,1 42,0 24,0 37,40 43,7 27,6 37,6 18 20 31,75 34,83 +/-0,08 39,40 43,5 17,0 32,1 45,0 25,5 38,90 46,4 29,1 39,1 22 34,93 37,98 +/-0,08 42,50 48,5 18,5 35,3 54,5 31,0 42,00 50,0 31,0 42,0 38,10 41,15 +/-0,08 45,70 52,1 21,9 38,1 58,0 33,0 46,00 53,5 33,0 46,0 24 28 44,45 47,50 +/-0,08 52,00 58,5 26,9 44,4 65,5 36,5 51,1 60,3 36,5 51,1 D A TE 3RD ANGLE D R AW N K.WINCZURA T I T L E : PROJECTION 16/12/2014 NOT TO CHECKED 16/12/2014 SCALE TINEL-LOCK BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 19/12/2014 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 17/07/2015 ANGULAR +/- 1° REVISIONS LTR DATE DESCRIPTION APPROVED VEAM "CIR" SERIES, LESS ENDBELL 18/02/2015 H.SMITH F REVISED PER ECO-15-002352 G REVISED PER ECO-15-010492 17/07/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. TXR64 G 3 POLAMCO/TE CAGE CODE: U5792