TE CONNECTIVITY VF4A-15F11

Automotive Relays Plug-in Mini ISO Relays VF4A (Standard, Shrouded and Weatherproof) ■ Pin assignment similar to ISO 7588 part 1 ■ Plug-in terminals ■ Customized versions on request – Integrated components (e.g. resistor, diode) – Customized marking – Special covers (e.g. brackets, shrouded) Typical applications Cross carline up to 40A for example: ABS control, blower fans, car alarm, cooling fan, Electric Power Steering, energy management, engine control, fuel pump, heated front screen, lamps: front, rear, fog light, main switch/ supply relay, valves, wiper control. FVF4Aco_fcw1_bw Contact Data Contact Data (continued) 6 Contact arrangement 1 form C, 1 CO Mechanical endurance >1x10 ops. Rated voltage 12VDC 1) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current Limiting continuous current, duration of maximum 3s for a make/break ratio of 1:10. form A/form B NO/NC 2) Current and time are compatible with circuit protection by a typical automotive fuse. 23°C 60/45A Relay will make, carry and break the specified current. 85°C 40/30A 3) See chapter Diagnostics of Relays in our Application Notes or consult the internet at 125°C 17/12A http://relays.te.com/appnotes/ 1) Limiting making current , form A/form B 120/45A 4) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay coil increases the release time and reduces the lifetime caused by increased erosion Limiting breaking current, form A/form B 60/40A and/or higher risk of contact tack welding. Limiting short-time current 2) overload current, ISO 8820-3 1.35 x 40A, 1800s 2.00 x 40A, 60s Coil Data 6.00 x 40A, 1s Rated coil voltage 12/24VDC Jump start test, ISO 16750-1 24VDC for 5min, Coil versions, DC coil conducting nominal current at 23°C Contact material silver based Coil Rated Operate Release Coil Rated coil 3) 5) 5) Min. recommended contact load 1A at 5VDC code voltage voltage voltage resistance power Initial voltage drop at 10A, VDC VDC VDC Ω±10% W form A (NO) contact, typ./max. 15mW/200mV F 12 7.2 1.2 90 1.6 form B (NC) contact, typ./max. 20mW/250mV H 24 14.4 2.4 360 1.6 Frequency of operation at nominal load 6 ops./min (0.1Hz) 5) Without components in parallel. 4) All figures are given for coil without pre-energization, at ambient temperature +23°C. Operate/release time typ. 7/2ms 5 Electrical endurance >1x10 ops. resistive load, form A (NO) contact 40A, 14VDC Coil operating range resistive load, form B (NC) contact 30A, 14VDC TEVF4_OVR1 Max. DC load breaking capacity Does not take into account the temperature rise due to the contact current E = pre-energization Does not take into account the temperature rise due to the contact current E = pre-energization. Load limit curve 1: arc extinguishes during transit time (changeover contact). Load limit curve 2: safe shutdown, no stationary arc (make contact). Load limit curves measured with low inductive resistors verified for 1000 switching events. 1 01-2016, Rev. 0116 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications © 2016 TE Connectivity. together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions Automotive Relays Plug-in Mini ISO Relays VF4A (Standard, Shrouded and Weatherproof) (Continued) Insulation Data Other Data (continued) Initial dielectric strength Terminal type plug-in, QC between open contacts 500V Cover retention rms between contact and coil 500V axial force 150N rms between adjacent contacts 500V pull force 200N rms push force 200N Terminal retention Other Data pull force 100N EU RoHS/ELV compliance compliant push force 100N 7) Protection to heat and fire according UL94 UL94-HB or better resistance to bending 10N 7) Ambient temperature -40 to 125°C force applied to side 10N Category of environmental protection, torque 0.3Nm IEC 61810 RT I (dustproof), Weight approx. 35 to 60g (1.2 to 2.1oz) RT III (sealed/sealed – shrouded) Packaging unit Degree of protection, IEC 60529 cover type VF4-1 357 pcs. IP54 (dustproof), VF4-4 200 pcs. IP67 (sealed) VF4-5, VF4-6 110 pcs. IP67 (sealed – shrouded), 6) No change in the switching state >1µs. Valid for NC contacts, NO contact values significantly higher. only with special connector 7) Values apply 2mm from the end of the terminal. When the force is removed, the terminal Vibration resistance (functional) must not have moved by more than 0.3mm. 6 IEC 60068-2-6 (sine sweep) 10 to 500Hz, min. 5g ) Shock resistance (functional) 6) IEC 60068-2-27 (half sine) 11ms, min. 20g Accessories Drop test, free fall, IEC 60068-2-32 1m onto concrete For details see datasheet Connectors for Mini, Mini (Shrouded) and Maxi ISO Relays Terminal Assignment CO COD COR 1 form C, 1 CO 1 form C, 1 CO with diode 1 form C, 1 CO with resistor 85 87 87a 85 87 87a 85 87 87a 86 30 86 30 86 30 Dimensions VF4A with dust cover VF4-1**** (without bracket) and VF4-4**** (with bracket) View of the terminals (bottom view) 28.0 MAX. Terminal thickness 6.0 15.0 5.0 0.81 + 0.03 8.0 16.2 28.0 MAX. 3.1 ˉ 5.3 86 25.5 MAX. 30 16.8 87 85 11.5 MAX. 8.4 17.9 6.3 6.3 TE1344-I2 2 01-2016, Rev. 0116 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications © 2016 TE Connectivity. together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions 87A 86 30 87 85 86 86 30 87 85 30 87 85 87A 87A 87A 18.6 9.0 22.5 6.4 Automotive Relays 0.39 Plug-in Mini ISO Relays MAX. VF4A (Standard, Shrouded and Weatherproof) (Continued) 11.5 12.25 7.25 MAX. Dimensions 4.1 MAX. 4.25 VF4A with shrouded dust cover View of the terminals (bottom view) 6.3 TYP. 32.0 MAX. VF4-2**** (without bracket) and VF4-5**** (with bracket) 4.0 18.6 25.0 MAX. 18.6 TE1347-82 9.0 9.0 22.5 22.5 32.0 MAX. 6.4 6.4 0.39 0.39 16.6 ±0.15 MAX. MAX. 6.6 17.9 9.0 8.4 11.5 11.5 12.25 12.25 7.25 MAX. 7.25 MAX. 8.0 4.1 MAX. 4.25 4.1 MAX. 4.25 4.5 6.3 TYP. 18.5 ±0.25 6.3 TYP. 32.0 MAX. 45.0 ±0.5 32.0 MAX. 16.8 4.0 4.0 25.0 MAX. 25.0 MAX. 4.20 ±0.15 TE1347-82 TE1347-82 11.5 MAX. 32.0 MAX. 32.0 MAX. 7.5 ±0.45 6.3 11.50 ±0.15 19.7 ±0.15 VF4A with weatherproof cover View of the terminals (bottom view) VF4-3**** (without bracket) and VF4-6**** (with bracket) 17.9 36.1 MAX. 7.0 REF. 17.9 36.1 MAX. 8.4 16.6 ±0.15 8.4 6.6 TE1348-91 9.0 8.0 8.0 4.5 4.5 16.8 16.8 30 18.5 ±0.25 45.0 ±0.5 85 87a 17.9 4.20 ±0.15 8.4 86 87 11.5 MAX. 8.0 7.5 ±0.45 6.3 11.50 ±0.15 19.7 ±0.15 16.8 12.0 ±0.38 36.1 MAX. 7.0 REF. 36.1 MAX. TE1348-91 30 85 87a 17.9 8.4 86 87 8.0 16.8 12.0 ±0.38 3 01-2016, Rev. 0116 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications © 2016 TE Connectivity. together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions Automotive Relays Plug-in Mini ISO Relays VF4A (Standard, Shrouded and Weatherproof) (Continued) Product code structure Typical product code VF4 -1 5 F 11 -S01 Type VF4A VF4A Cover type 1 Dust cover standard 2 Shrouded dust cover standard 3 Weatherproof cover standard 4 Dust cover with bracket 5 Shrouded dust cover with bracket 6 Weatherproof cover with bracket Contact arrangement 5 1 form C, 1 CO Coil F 12VDC H 24VDC Contact material 11 Silver based 21 Silver based for capacitive loads Coil suppression S01 Resistor in parallel (680Ω) S05 Diode in parallel (cathode 86) S08 Resistor in parallel (2700Ω) Product Superseded Arran- Coil Cir- Contact Termi- Part Cover 1) code by gement suppression cuit material nals number VF4A-15F11 V23136-A0004-X058 1-1414686-0 1 form C, Standard CO Silver based Plug-in, 6-1393298-0 VF4A-15F11-C05 – – 1 CO Sealed QC 6-1393298-2 VF4A-15F11-S01 V23136-A0004-X059 1-1414687-0 Standard Resistor 680Ω COR 6-1393298-4 VF4A-15F11-S05 V23136-A0004-X086 4-1414992-7 Diode (cathode 86) COD 6-1393298-5 2) VF4A-15F21-S01 V23136-A0004-X075 7-1414985-1 Resistor 680Ω COR Silver based 7-1393298-3 VF4A-15H11 V23234-A0004-X055 2-1904025-6 CO Silver based 8-1393298-1 VF4A-15H11-S08 V23234-A0004-X053 2-1904025-5 Resistor 2700Ω COR 5-1393305-7 VF4A-45F11 V23234-A1001-X036 3-1904022-2 Bracket CO 8-1393298-8 VF4A-45F11-S01 V23234-A1001-X033 1-1904022-1 Resistor 680Ω COR 1-1393302-0 VF4A-45H11 V23234-A1004-X050 1-1904027-1 CO 1-1393302-1 VF4A-55F11-S01 – – Shrouded Resistor 680Ω COR 8-1393305-7 VF4A-65F11-S01 – – Weather- 9-1393305-5 VF4A-65H11-S08 – – proof Resistor 2700Ω 9-1393305-9 1) See terminal assignment diagrams. 2) Special contact material for capacitive loads. Other types on request. This list represents the most common types and does not show all variants covered by this datasheet. 4 01-2016, Rev. 0116 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications © 2016 TE Connectivity. together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. http://relays.te.com/definitions