1210 Standard SPECIFICATIONS  PC Board Mountable Pressure Sensor  0-100 mV Output  Current Excitation  Gage, Absolute, and Differential  Temperature Compensated The 1210 is a temperature compensated, piezoresistive FEATURES silicon pressure sensor packaged in a dual-in-line configuration.  Dual-in-Line Package It is intended for cost sensitive applications where excellent  0ºC to 50ºC Compensated performance and long-term stability are required. Temperature Range Integral temperature compensation is provided over a  ±0.1% Non-Linearity range of 0-50°C using laser-trimmed resistors. An additional  1.0% Interchangeable Span laser-trimmed resistor is included to normalize pressure (provided by gain set resistor) sensitivity variations by programming the gain of an external  Solid State Reliability differential amplifier. This provides sensitivity interchangeability of ±1%. Gage, absolute, and differential pressure ranges from 0- 2 psi to 0-100 psi are available. Multiple lead and tube APPLICATIONS configurations are available for specific applications.  Medical Instruments Please refer to the 1210 1 psi datasheet for low pressure  Airspeed and Altitude Measurements applications. For voltage excitation, please refer to the Model  Process Control 1220.  Factory Automation  Vacuum Measurement  Handheld Calibrators SENSOR SOLUTIONS /// 1210 03/2018 Page 1 1210 Standard STANDARD RANGES Range psia psid psig Port Styles 0 to 2   S, L, N, B* 0 to 5    S, L, N, B* 0 to 15    S, L, N 0 to 30    S, L, N, 0 to 50    S, L, N 0 to 100    S, L, N *Barb port styles are only available in lead configuration type 3. See Ordering Information. PERFORMANCE SPECIFICATIONS Supply Current: 1.5mA Ambient Temperature: 25°C (unless otherwise specified) PARAMETERS MIN TYP MAX UNITS NOTES Span 75 100 150 mV 1 Span (2 psi version) 30 60 mV 1 Zero Pressure Output -2 2 mV Pressure Non Linearity -0.1 ±0.05 0.1 %Span 2 Pressure Hysteresis -0.05 ±0.01 0.05 %Span Input & Output Resistance 2500 4400 6000 Ω Temperature Error – Span -0.5 ±0.3 0.5 %Span 3 Temperature Error – Zero -0.5 ±0.1 0.5 %Span 3 Thermal Hysteresis – Zero ±0.1 %Span 3 1.5 Supply Current 2.0 mA Response Time (10% to 90%) 1.0 ms 4 Output Noise (10Hz to 1kHz) 1.0 µV p-p Long Term Stability (Offset & Span) ±0.1 %Span 5 Pressure Overload 3X Rated 6 Compensated Temperature 0 50 °C Operating Temperature -40 +125 °C Storage Temperature -50 +150 °C Weight 3 grams Solder Temperature 250ºC Max 5 Sec. Media Non-Corrosive Dry Gases Compatible with Silicon, Pyrex, RTV, Gold, Ceramic, Nickel, and Aluminum Notes 1. Ratiometric to supply current. 2. Best fit straight line. 3. Maximum temperature error between 0°C and 50°C with respect to 25°C. For 2psi devices, Temperature Error -- Zero is ±1%. 4. For a zero-to-full scale pressure step change. 5. Long term stability over a one year period with constant current and temperature. 6. 2X maximum for 100psi device. 20psi maximum for 2 and 5psi devices. Application Schema SENSOR SOLUTIONS /// 1210 03/2018 Page 2 1210 Standard DIMENSIONS SENSOR SOLUTIONS /// 1210 03/2018 Page 3 1210 Standard BARB DIMENSIONS SENSOR SOLUTIONS /// 1210 03/2018 Page 4 1210 Standard CONNECTIONS APPLICATION SCHEMATIC SENSOR SOLUTIONS /// 1210 03/2018 Page 5 1210 Standard ORDERING INFORMATION 1210A – 030 A – 3 B Vent Pressure Range [psi] L Long Tube (1) 002 S Short Tube (1) 005 N No Tube 015 B Barb 030 050 Fitting Type 100 3 Opposite Side as Vent Tube Same Side as Vent Tube 1 Pressure Type Barb port styles are only available in lead configuration type 3. G Gage A Absolute D Differential (1) : Not available in Absolute Pressure Type NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., MEAS Switzerland Sarl, Measurement Specialties (China) Ltd., a TE Connectivity company a TE Connectivity company a TE Connectivity company Tel: +1 800-522-6752 Tel: +31 73 624 6999 Tel: +86 0400-820-6015 customercare.frmt@te.com customercare.bevx@te.com mailto:customercare.shzn@te.com TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. © 2015 TE Connectivity Ltd. family of companies All Rights Reserved. SENSOR SOLUTIONS /// 1210 03/2018 Page 6