® EZGround Grounding Systems Ground Plates Galvanized Grounding Plates • Made of high-quality steel, hot dip galvanized • Major time and cost savings vs ground rods 14-3/4 1/4 5/8 9-3/4 2 ± 1/4 3-7/8 ± 1/4 Cat. No. Description Wire Range Std. Pkg. 1016TB Galvanized grounding plate 1016BTB Galvanized grounding plate (complete with JAB34C connector) 8 sol. to 3/0 str. 1 1016TB-NG* Grounding plate (not galvanized) 1016BTB-NG* Grounding plate (not galvanized) (complete with JAB34C connector) * CSA not applicable. Ground Electrode Boxes Metallic Gradient Control Mats • To reduce risk and prevent build up of dangerous potential differences between high-voltage equipment or structures and the user standing on the ground surface. CEC Rule 36-308. Cat. No. Description 51628 Pregalvanized steel 51629 Hot dip galvanized steel 51628-ALTA Ground electrode box for Alberta only 14 gauge steel 10 in. diameter, 12 in. depth. Wt/100 Cat. No. Description Std. Pkg. lb. kg 64663 Mat with hardware 1 3000 1363 4 ft. x 6 ft. hot dip galvanized mat is made from 6 in. x 6 in. welded mesh. 1/4 in. diameter. With hardware 3-1/2 x 1/2 galvanized bolts, 3 gal. washers and 3 gal. nuts. Custom ground mat also available upon request. w w w .tnb .c a D24 SectionD-grounding-systems.indd 24 6/6/2017 9:43:23 AM ® Grounding Systems EZGround Ground Plates Type GP — Copper Pole Bottom Ground Plates for Multigrounded Neutral Construction • More efficient than butt wrapping poles • Made of electrolytic sheet copper • Built-in high-pressure connector for ground lead, or supplied with #6 AWG copper pigtail pre-attached • Plates are grooved for trapping moisture Pigtail Wire Range Diameter of Plate Cat. No. Min. Max. Min. Max. (in.) (mm) 2 2 (mm ) (mm ) GP100 7-1/2 191 GP110 8 2 sol. 6.3 25.6 10 254 GP114 14 356 GP1003 191 GP1008 #6 AWG solid Cu Pigtail with 18 in. conductor – – 7-1/2 GP1108 254 Type PB — Copper Pole Ground Plates • Installed on butt end of utility poles to provide an economical, low resistance neutral ground • Installed cost considerably less than butt-wrapped poles. Plate portion fabricated of 0.025 in. pure copper • PBGW connector is eye-bolt type, cast of corrosion resistant aluminum bronze alloy, with silicon bronze nut and lock washer. Riveted all copper terminal lug is an integral part of the PBH, and provides the means of connection to the grounding conductor Wire Range Finished Surface Area Cat. No. Size (in.) (sq. in.) Max. Min. PBGW 2/0 str. 10 sol. 7 x 7-5/8 56 PBH* 4 str. 14 sol. * RUS Listed. w w w .tnb .c a D25 SectionD-grounding-systems.indd 25 6/6/2017 9:43:24 AM