Tools, Dies and Kits Hydraulic Pumps 13606 Foot/Hand-Operated and 13604 Hand-Operated Hydraulic Pump • 13606 operates with either foot or hand; 13604 is hand operated only • Operate all T&B hydraulic heads • Built-in safety bypass valve • Factory set at 9,800 psi Specifications Cat. No. Description Pkg. Qty. • Nominal Pressure: 9,800 psi 13606 Combination Hand or Foot-Operated Hydraulic Pump • Pumping Capacity: 2.6 cu. in./min. @ 200 psi 0.16 cu. in./min. @ 10,000 psi 1 • Reservoir Volume: 125 cu. in. (0.54 gal.) 13604 Hand-Operated Hydraulic Pump • Max. Handle Force: 130 lb. • Dimensions (L x W x H): 23 in. x 5-3/4 in. x 6-3/4 in. • Weight: 29 lb. Battpac™ BPLT13970P2 Pump • Small and lightweight • 60 minutes full recharge • Highly visible display indicates battery power level • Socket for 24 VDC external connection • Operation in any position: on its side or upright • Separate operation/release buttons protect against accidental operation • Energy consumption limited by automatic shut-off • Easily accessible oil top-up inlet Pkg. Cat. No. Description Specifications Qty. Battpac™ Pump includes canvas accessories carrying bag, carrying • Nominal Pressure: 10,000 psi BPLT13970P2 strap, remote hand controller, two batteries, battery charger • Pumping Capacity: 30 cu. in./min. and non-drip couplings • Reservoir Volume: 60 cu. in. (.26 gal.) BPLT13970RB Ni-MH 24 V Replacement battery 1 • Dimensions (L x W x H): 13-1/2 in. x 6-1/2 in. x 12-3/4 in. BPLT13970RP Canvas backpack for pump • Battery: Ni-MH 24 V, 3.0 Ah BPLT13970DC Power connecting cable with clips • Weight with Battery: 20.9 lb. BPLT13970FS Remote foot pedal controller Suggested replacement oil T&B Cat. No. 21061 or any light weight hydraulic fluid or automatic transmission fluid is recommended. Do not use silicon based fluids. Battery Performance Guide In tests, the number of crimps obtained from a fully charged battery, using a remote crimping head, was: • 102 crimps for Cu connectors on 250 kcmil Cu conductor • 98 crimps for C-Tap connectors on #2 AWG Cu conductor • 76 crimps for Cu sleeve connectors on 500 kcmil Cu conductor w w w .tnb .c a E22 Tools, Dies and Kits Hydraulic Pumps 13600 Electric Hydraulic Pump • Designed for use with single-acting cylinders and tools rated for 10,000 psi operation • Supplied with metal carrying case • 13620 hand switch and 13619 hydraulic hose, both sold separately, required for operation Specifications • Motor: 1/2 hp, 115 V 50–60 Hz 10 A • Reservoir Volume: • Pumping Capacity: 04 cu. in. (.45 gal.) 170 cu. in./min. at 100 psi • Basic Pump Dimension: (L x W x H) 32 cu. in./min. at 1,000 psi 6 in. x 8 in. x 16 in. 25 cu. in./min. at 5,000 psi • Weight: 25 lb. 18 cu. in./min. at 10,000 psi • Nominal pressure: 10,000 psi Cat. No. Description Pkg. Qty. Electric Hydraulic Pump – hand or foot switch and 13600 1 nonmetallic hose (sold separately) required for operation Accessories 13620 Hand Switch – 10 ft. 13589A Foot Switch – 10 ft. 13619 10 ft. Nonmetallic Hose 1 13618 20 ft. Nonmetallic Hose 13600S “Sled” type stand for 13600 pump Suggested replacement oil T&B Cat. No. 21061 or any light weight hydraulic fluid or automatic transmission fluid is recommended. Do not use silicon based fluids. 13610A Electric Hydraulic Pump with ® Shure Stake Control ® • Shure Stake control mechanism requires 9,800 psi pump pressure before recyling to prevent under-crimping Specifications • Designed for use with single-acting cylinders and • Motor: 1/2 hp, 115 V 50–60 Hz 12.5 A tools rated for 10,000 psi operation • Pumping Capacity: 170 cu. in./min. at 100 psi • Supplied with metal carrying case 32 cu. in./min. at 1,000 psi 25 cu. in./min. at 5,000 psi 18 cu. in./min. at 10,000 psi • Reservoir Volume: Cat. No. Description Pkg. Qty. 104 cu. in. (.45 gal.) ® Electric Hydraulic Pump with Shure Stake – hand or foot • Basic Pump Dimension: (L x W x H) 13610A switch and nonmetallic hose 1 8-1/2 in. x 10-1/2 in. x 16 in. (sold separately) required for operation • Weight: 35 lb. Accessories • Nominal pressure: 10,000 psi 13611 Hand Switch – 10 ft. 13612 Foot Switch – 10 ft. 1 13619 10 ft. Nonmetallic Hose 13618 20 ft. Nonmetallic Hose Suggested replacement oil T&B Cat. No. 21061 or any light weight hydraulic fluid or automatic transmission fluid is recommended. Do not use silicon based fluids. w w w .tnb .c a E23 Tools, Dies and Kits Hydraulic Pumps 13810 Heavy-Duty Electric Hydraulic Pump ® with Shure Stake Control • Designed for perfect crimps every time in heavy-duty OEM applications • Heavy-duty OEM two-stage pump with high flow rate ® • Shure Stake control mechanism requires 9,800 psi pump pressure before recyling to prevent under-crimping • Requires hand or foot control (sold separately) Cat. No. Description Pkg. Qty. ® Heavy-duty electric hydraulic pump with Shure Stake control — hand or 13810 1 foot switch and nonmetallic hose (sold separately) required for operation Specifications Accessories 13611 Hand Switch – 10 ft. • Motor Rating: 1-1/2 hp, 115 V, 60 Hz, 23 A 13612 Foot Switch – 10 ft. • Pumping Capacity: 13619 10 ft. Nonmetallic Hose 235 cu. in./min. at 200 psi 13618 20 ft. Nonmetallic Hose 1 61 cu. in./min. at 8,000 psi 21061 Hydraulic Oil • Reservoir Volume: 462 cu. in. (2 gal.) 13798 Male Pioneer Quick Disconnect Coupler • Dimensions (L x W x H): 13799 Female Pioneer Quick Disconnect Coupler 10-3/4 in. x 15 in. x 20-3/4 in. 13614 Metallic Reinforced Hose for OEM operations – 10 ft. • Weight: 60 lb. Suggested replacement oil T&B Cat. No. 21061 or any light weight hydraulic fluid or automatic • Nominal Pressure: 10,000 psi transmission fluid is recommended. Do not use silicon based fluids. 25000 Air-Operated Bench-Mount Crimp Tool • Installs copper and aluminum connectors on wire sizes from 8 AWG to 500 kcmil • Compact, heavy-duty pneumatic air tool • S imple to operate – just insert stripped wire into connector barrel, position it in crimping nest and depress foot pedal to actuate crimping dies • Uses same crimping dies as TBM6S (13000 Series) (see page E31) Cat. No. Description Pkg. Qty. 25000 Air-Operated Bench-Mount Crimp Tool 1 Creates Diamond-style crimp w w w .tnb .c a E24