Manufacturers
THOMAS & BETTS 54725
Description
Cable Accessories Tap Copper
54725
Part Number
54725
Price
Request Quote
Manufacturer
THOMAS & BETTS
Lead Time
Request Quote
Category
Wire and Cables » Cable Accessories
Specifications
Manufacturer
Thomas & Betts
Manufacturers Part #
54725
Lead Time
5 Week Lead Time
Sub-Category
Cable Accessories
Factory Pack Quantity
1
Datasheet
Extracted Text
® EZGround Grounding Systems C-Taps H DB Dimensions in. (mm) Dies for TBM14M, Cat. No. Main Tap Crimps 13100A or TBM15I* H L L CTP22 #6 sol.–#2 str. 1.16 (29.5) HBKC #6 sol.–#2 str.** CTP202 #1 str.–2/0 str. 1.41 (35.8) 0.75 (19.1) 15501A CTP2020 #1 str.–2/0 str. #1 str.–2/0 str. 1.54 (39.1) 1 H H CTP25020 #6 sol.–2/0 AWG** 1.97 (50.0) 3/0 str.–250 kcmil H 15G86R CTP250250 3/0 str.–250 kcmil 2.06 (52.3) CTP50020 #6 sol.–2/0 AWG** 2.42 (61.5) 0.88 (22.4) 2 CTP500250 300–500 kcmil 3/0 str.–250 kcmil 2.67 (67.8) 15G121R CTP500500† 300–500 kcmil 2.91 (73.9) 1.10 (27.9) 3 * Cat. No. 15500 adaptor required if using TBM15I and 155XX series Dies. L ** #6 AWG branch must be doubled. L † Must use TBM15I tool L Material: High-Conductivity Copper. Copper C-Crimps Wire Combinations** L †† L L †† ØA H H H H ØB L Figure 1 – Requires 3 crimps Dimensions in. Installing Die Die Manual Tool (mm) Cat. No. Run Tap 14- and 15-Ton Dies for Index OD Series Cat. No. Ø A Cable Ø B Cable H (in.) L (in.) Crimps Tools L H Tools* 0.56 CTP22N #6 sol.- #2 str. #6 sol. - #2 str. 1-5/32 1-1/2 3 15534SS (Fig.1) BC48 8 sol.–8 str. (14.2) CTP202N #1 str.- 2/0 str. #6 sol. - #2 str. 1-13/32 1-1/2 3 15517SS (Fig.1) BG or 0.64 0.75 CTP2020N #1 str.- 2/0 str. #1 str. - 2/0 str. 1-9/16 1-1/2 3 15517SS (Fig.1) BC46-BB 6 sol.–4 str. 6 sol.–6 str. BY31 B58CS 5/8 (16.3) (19.1) CTP25020N 3/0 str.- 250 kcmil #1 str. - 2/0 str. 1-31/32 1-1/2 3 15506SS (Fig.1) † 0.80 CTP250250N 3/0 str.- 250 kcmil 3/0 str.- 250 kcmil 2-1/16 1-1/2 3 15506SS (Fig.1) BC44 4 sol.–4 str. (20.3) CTP500250N 300 - 500 kcmil 3/0 str.- 250 kcmil 2.72 2.5 5 15603SS 0.98 CTP50020N 300 - 500 kcmil #6 sol. - 2/0 str. 2.42 2.5 5 15603SS BC24 8 sol.–4 str. (24.9) 0.75 ** CTP500500N 300 - 500 kcmil 300 - 500 kcmil 2.92 2.5 5 15G121N 2 sol.–2 str. C BY33 HBKC (19.1) 1.05 BC22 2 sol.–2 str. * These dies may be used with the TBM15CR-LI or TBM15I compression tools. Please note that the (26.7) die adapter 15500-TB is required for use with these tools. 1.31 ** Can be used with ¾ in. (17.3 mm) copper clad ground rod. The ground rod must be pre-crimped BC202 8 sol.–2 str. (33.3) 0.94 with die 15507SS to comply with IEEE 837-2014. 1/0 sol.–2/0 str. E or O – HO † (23.9) 1.34 Can be used with 5/8 in. (15.8 mm) copper clad ground rod. The ground rod must be pre-crimped BC2020-BB 1/0 str.–2/0 str. (34.0) with die 15526SS to comply with IEEE 837-2014. BC402 6 sol.–2 str. F or 1.06 1.63 – HD BC4020 3/0 str.–4/0 str. 1/0 sol.–2/0 str. D3 (26.9) (41.4) BC4040 3/0 sol.–4/0 str. **Do not meet IEEE 837. w w w .tnb .c a D32 Accommodates this entire range Accommodates this range ® Grounding Systems EZGround C-Taps Large Size for Certified to 600 V Small Size H • M ore economical than other taps and split bolts in terms of purchase, inventory, installation time, insulation and L maintenance. L • C olor-coded for easy matching with Fig. 2 Fig. 1 proper die • B arely larger than conductor insulation H H once installed L L Fig. 3 Fig. 4 C E Material: High-Conductivity Wrought Copper Code Wire D Insulation Dimensions Comb. Cir. Area Die Finish: Plain Choice in. (mm) Group Group Colour Range Cat. No. 2 3 Code ™ Smart Adhe- Shrink Main Branch Group 1 TMB62PCR-LI L H Tools sive Tubing 12 14 0.31 0.31 54705 6TON21SS TBM6221 Red 14 16 (7.9) (7.9) Wire Size Dimensions in. (mm) Installing Die Die No. of Colour 10 10 0.56 0.44 Cat. No. 6TON24SS TBM6224 – HS12-6 Blue 54710 Code Crimps Code (14,2) (11.2) Main Branch C D E Tool Cat. No. 8 12 #1 6 10, 12 0.56 0.63 #1 15512SS TBM14M 6TON29SS TBM6229 Grey 1/0–#2 76 54715 1/0 (14.2) (16.0) 15512SS* 8 TBM15I 2/0–#3 1.93 0.75 0.53 76 54755 2/0 1 Blue 8, 10, 12 TBM12 1/0–#6 (49.0) (19.1) (13.5) TBM12D-4 76 4 or 5 TBM8- 1.16 0.69 3/0 13100A #1–#8 76 54720 6TON33SS TBM6233 Brown 15512SS 4/0 750C20 (29.5) (17.5) 6 6, 8 15506SS TBM14M 2/0 2/0–#1 87H 6, 8, 10, 15506SS* TBM15I 3 3/0 3/0–#3 1.43 0.75 0.59 87H 1.16 0.81 54760 2 Brown 12*** 6TON37SS TBM6237 Green 54725 TBM12 4/0 4/0–#4 (36.3) (19.1) (15.0) TBM12D-3 87H (29.5) (20.6) 13100A 250 kcmil #1–#8 87H 15506SS 4 or 5 6, 5 TBM8- 2/0 2/0–#1 15505SS TBM14M 6, 8, 10, HS6-1 99H 750C2530 3/0 3/0–#2 2 15505SS* TBM15I 1.68 1.00 0.64 99H 12 54765 4/0 4/0–#4 2 Pink 1.16 0.84 TBM12 TBM12D-2 (42.7) (25.4) (16.3) 99H 6TON42SS TBM6242 Pink 54730 250 kcmil 3/0–#6 (29.5) (21.3) 13100A 99H 15505SS 3 5 300 kcmil 2/0–#8 4 3 15515SS TBM14M 4/0 4/0–2/0 106H 15515SS* TBM15I 250 kcmil 250–#1 1.68 1.00 0.68 106H 4, 5, 6, 8, AC5X3 54770 2 Black 1 TBM12 TBM12D-2 300 kcmil 4/0–#4 (42.7) (25.4) (17.3) 106H 10, 12 0.06 0.88 13100A 350 kcmil 3/0–#6 106H 15515SS 54735 6TON45SS TBM6245 Black (1.5) (22.4) 2 4,5 250 kcmil 250 kcmil 15504SS TBM14M 300 kcmil 300–3/0 115H 3 3,4 TBM8- 15504SS* TBM15I 350 kcmil 350–1/0 1.88 1.25 0.81 115H 54775** 2 Yellow 750C3540 TBM12 400 kcmil 300–#2 (47.8) (31.8) (20.6) TBM12D-1 115H 4, 5, 6, 8, 1/0 13100A 450 kcmil 250–#4 115H 15504SS 10, 12 1.69 0.97 500 kcmil 250–#6 54740 6TON50SS TBM6250 Orange (42,9) (24.6) 1 3, 4 350 kcmil 350–4/0 400 kcmil 400–2/0 2.18 1.25 0.82 2 2, 3 TBM15I 15603 54780 125H 2 N/A 450 kcmil 450–#1 (55.4) (31.8) (20.08) 500 kcmil 500–#2 3, 4, 5, 6, 2/0 HS4-30 8, 10, 12 1.69 1.06 2.12 2.00 1.00 6TON54SS TBM6254 Purple 54745 TBM15I 15603 54785 750 kcmil 4/0–#6 125H 3 N/A (42,9) (26.9) (53.8) (50.8) (25.4) 1/0 2, 3 1 1, 3 TBM8- 2.68 2.00 1.31 TBM15I 15603 750 kcmil 750–4/0 125H 3 N/A 54790 (68.1) (50.8) (33.3) 2, 3, 4, 750C4550 3/0 5, 6, 8, UL approved for direct burial. 1.69 1.19 10, 12 54750 6TON62SS TBM6262 Yellow For covers see Section B. (42.9) (30.2) 2/0 1, 2 Taps can be supplied tin-plated. Add suffix “TP” to any Cat. No. (i.e. 54725TP). * Cat. No. 15500TB adaptor required if using TBM15I and 155xx series dies. 1/0 1/0, 1 ** #6 AWG branch must be doubled. *** When using 3 AWG on main and 12 AWG on branch with Smart™ Tools and dies, 12 AWG wire must be Tooling and Die Selector Chart see Section E. doubled (hair-pinned) and placed on branch for crimping. Group 1 = TBM6H, TBM62PCR-LI, TBM62CR-LI, TBM6UNICR-LI. Group 2 = TBM45S, TBM41E (require 2 compressions within each crimp area). Group 3 = TBM4/4S, TBM5S, TBM6S, TBM8/8S, TBM6H (require 1 compression within each crimp area). w w w .tnb .c a D33
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 54725?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Cable Accessories Zinc Die Cast 035-72775-21
1 1/4in Conn,90D,Ac/Flex,Dc,Clmp 035-73673
Cable Accessories Drive Rivet Nylon Natural 08200C
Cable Accessories Rivet Nylon White 08200M
Teck Cable Fittings 10000
Teck Cable Fittings 10004
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods