THOMAS & BETTS BC1104-L

Boxes and Covers Rework Boxes CI425 CI425-L CI525-L BC775-LD BC777-LRB “Screwlok” brackets for “Screwlok” brackets for “Screwlok” brackets for “Swing-Arm” rework brackets. Pivoting ends for rework installation. rework installation. rework installation. rework installation. Max. wall thickness: 3/4 in. Non-gangable. Max. wall thickness: Max. wall thickness: 5/8 in. Max. wall thickness: 5/8 in. Max. wall thickness: 5/8 in. 1-1/8 in. BC1004-LRB BC1104-LRB BC1104-LRW BC2104-LRB BC2104-LRB-2 BC54151-LD Flat sides for rework Flat sides for rework Rework bracket for closed Flat sides for rework Flat sides for rework “Swing-Arm” rework brackets. applications. applications. wall applications. applications. 1 gang. applications. 2 gang. Max. wall thickness: 3/4 in. Max. wall thickness: 1 in. Maximum load capacity: 12 lb. (5.5 kg) Dimensions Features Knockouts Pryouts Volume Cat. No. (Cu. in.) Clamps ends bottom ends sides bottom H x W x D (in.) Device Boxes CI425 10.0 3 x 2 x 2 - 2 1 - - - CI425-L 10.0 3 x 2 x 2 Loomex/BX - - 4 - - CI525-L 12.5 3 x 2 x 2-1/2 Loomex/BX - - 4 - - BC775-LD 10.0 3 x 2 x 2-1/4 Loomex - 1 4 - - BC777-LRB* 11.0 3 x 2 x 2-1/4 Loomex - 1 4 - - BC1004-LRB 15.0 3 x 2 x 3 Loomex/BX - 1 4 - - BC1102-LRB 10.0 3 x 2 x 2 Loomex/BX - - 4 - - BC1104-LRB 12.5 3 x 2 x 2-1/2 Loomex/BX - - 4 - - BC1104-LRW 12.5 3 x 2 x 2-1/2 Loomex/BX - - 4 - - BC2104-LRB* 12.5 3 x 2 x 2-1/2 Loomex/BX - - 4 - - BC2104-LRB-2* 25.0 3 x 4 x 2-1/2 Loomex/BX - - 8 - - Octagonal Boxes BC54151-LD 15.0 4 x 4 x 1-1/2 Loomex/BX - 1 - 4 4 * Non-Gangable w w w .tnb .c a A56 Boxes and Covers Rework Applications CI-820DX Mounting Instructions Package of 150 units Device Box Supports: CI820-DX is suitable for all device boxes incorporating mounting ears. After determining the location for the device, trace a Pull the cables through the opening 2-5/16 in. by 3-1/4 in. pattern on the drywall and carefully cut out and secure them to the outlet box. 01 02 the pattern keeping within the confines of the lines. 01a 01b 01c 02a Snap one CI820-DX into place on each side of the opening. 03 03a 03b Push the outlet box into the opening ensuring that the mounting ears are flush to the drywall and do not piggyback onto the flanges of the CI820-DX. Bend the protrusions over the sides of the box and crimp into place. 04 (It is recommended that pliers be used to ensure a strong hold on the box.). 04a 04b 04c 04d 04e Proceed to wire the device using approved The box is wiring procedures. secured in place. 05 06 05a 05b 06a 06b w w w .tnb .c a A57 CI820-DX 3 1/4 3 1/4 2 3/8 2 3/8