THOMAS & BETTS CSS-160
Specifications
Manufacturer
Thomas & Betts
Manufacturers Part #
CSS-160
Lead Time
5 Week Lead Time
Sub-Category
Cable Accessories
Factory Pack Quantity
50
Datasheet
Extracted Text
CSS-100, CSS-135, CSS-160 CSS-50R CSS-B CSS-H 50 ft reel of cable strap- can be Zinc-plated steel base Zinc-plated steel and CSS-270 cut to any desired length. for vertical cable or hanger for horizontal Pre-cut cable straps ranging from 10” to 27” long wire runs. cable or wire runs. with locking head installed. CSS-LH TCP-360 CSS-360 WT3D TC5359 Acetal plastic head Stackable 1/2” spacer for Stackable 1/2” spacer Use for tightening and Nylon mounting base with integral marine use with telecom cables. designed with smooth cutting Deltec cable for masonry and brick grade silicon bronze Can be rotated 90º to body surface to prevent support straps. Safe and surfaces, requires 3/8” locking device accommodate large or deformation of coaxial easy to use, cuts strap pre-drilled hole. multiple cables. and fiber optic cables. flush with locking head - no sharp edges! OrDering infOrmatiOn Catalog# DesCription ® Deltec cable Support SyStem CSS-100 Cable Strap with head, 10.0” long CSS-135 Cable Strap with head, 13.5” long CSS-160 Cable Strap with head, 16.0” long CSS-270 Cable Strap with head, 27.0” long CSS-50R 50 foot Reel of Strap Deltec Kit CSS-5K, CSS-10K CSS-5K 5 Reels Cable Strap, 150 locking heads Locking heads and 50 ft reels of cable strap CSS-10K 10 Reels Cable Strap, 300 locking heads available in bulk packs of 5 or 10 reel kits CSS-B Base CSS-H Hanger CSS-LH Locking Head TCP-360 Modular Stackable Cable Spacer CSS-360 Modular Stackable Spacer for Fiber and Coax Cable WT3D Installation/Cutting Tool TC5359 Mounting Base for Masonry Thomas & Betts Corporation Please ask your Thomas & Betts representative for a complete catalog of quality Thomas & Betts products or visit us at www.tnb.com. For customer service, call Communications Products Group 1-800-685-9452. For technical questions, call 1-888-862-3289. Tel: 800-920-0328 • 901-252-5000 Fax: 800-283-6756 • 901-252-1389 © 2006 Thomas & Betts Corporation. All rights reserved. Data Sheet # CDS-DeLteC ® DelteC Cable support system Provides a strong, long-life and cost saving method of securing communication cables The Deltec® Cable Support System is a user-friendly product de- signed to provide fast, effective fastening of communications cables to messenger strand. It is equally well suited for copper conductor cable, coaxial cable, fiber optic cable and inner duct in aerial ap- plications. The Deltec® System answers your aerial cable needs with innova- tive design and state of the art materials. UV, weather resistant acetal plastic cable straps, marine grade locking devices and plated steel hanger accessories combine to provide a system that can meet your specific needs. Deltec® cable strap is available in standard lengths of 10 to 13.5, 16 and 27 inches as well as in convenient 50 foot reels to reduce waste and allow custom sizing by the technician in the field. Addi- tional “standard” lengths can be established for applications where higher volumes prevail. TCP-360 provides CSS-360 spacer can • Proven years of service desired spacing between be used with fiber optic or • No sharp edges - Craft-Friendly! Cable Friendly! messenger and telecom coaxial cable in single or cables in 1/2” increments multiple cable applications • Ease of installation - one wrap, no re-threading of strap • Lowers installation costs • High tensile strength • Total flexibility in strap length • Stackable spacers accommodate all requirements - no need to stock multiple sizes of individual height spacers. strap anD boDy minimum tensile strength • Acetal Plastic Construction • 250 Pounds • Offers Superior Resistance to CSS-H zinc plated steel CSS-B zinc plated steel Sunlight, Moisture and High outDoor life hanger for horizontal base provides additional Salt Environments. • Designed to Last a Minimum runs, installs easily on strength for vertical of 20 Years loCking DeviCe any surface cable runs • Marine Grade Corrosion- Continuous loaD Resistant • 20 Pounds Silicon Bronze installation range • -30º F to 150º F Thomas & Betts Corporation Please ask your Thomas & Betts representative for a complete catalog of quality Thomas & Betts products or visit us at www.tnb.com. For customer service, call Communications Products Group 1-800-685-9452. For technical questions, call 1-888-862-3289. Tel: 800-920-0328 • 901-252-5000 Fax: 800-283-6756 • 901-252-1389 © 2006 Thomas & Betts Corporation. All rights reserved. Data Sheet # CDS-DeLteC
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the CSS-160?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers






What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods