Increase Your Profit by Reducing Installation Time on the Jobsite! Pre-Fab Component Brackets SBO16 mounted to 16" studs with three 4" square boxes (full capacity) installed SV1218 mounted to floor track and studs with one 4" square box installed and optional SVX adapter plate with one 4" square box installed SBO24 mounted to 24" studs with five 4" square boxes (full capacity) installed Pre-Fab Component Brackets SV1218 Floor-Track Vertical Mounting Easily Pre-Assembled Off-Site Bracket for Faster Installation On-Site! Rather than assembling box mounting brackets and device covers on site, use Steel City Pre-Fab Components to pre-assemble them off site for a quick and easy installation. They accommodate a wide variety of Steel City device covers, and they are stocked for fast-track projects. • Ideal for use in hotels, casinos, hospitals, large office buildings, and any other commercial or institutional application where rough-in products can be pre-fabricated to match floor plans for quicker on-site installation • Accept standard Steel City device covers (mud rings), widely available from any supporting distributor, SVX with one as part of complete assembly 4" square box installed • Stocked items for fast-track projects — no special lead time required ® • All products are UL approved and meet applicable building codes SBO16 mounted to 16" studs with one 4" square box installed SBO24 mounted to 24" studs with five 4" square boxes (full capacity) installed SV1218 Floor-Track SV1218 Vertical Mounting Bracket Floor-Track Vertical The SV1218 is a vertical bracket that mounts to a Mounting standard floor track and offers two mounting locations Bracket 11 for 4" square or 4 ⁄16" boxes at 12" and 18" from the SVX floor. It comes with a horizontal cross-support bar that Adapter Plate mounts to 16"- or 24"-spaced studs. The optional SVX adapter plate enables expansion of box capacity on either side of the SV1218. • Bracket mounts to floor track easily with screws through three pre-punched holes in bottom plate (only two screws required for most applications) • Offers pre-measured box-mount locations at 12" and 18" from floor — fast installation with no measuring required 11 • Accepts 4" square or 4 ⁄16" boxes (deep or shallow) with standard device covers (mud rings) SVX with one 4" square box installed • Supplied with horizontal cross-support bar for stability after installation — prevents unit from falling into open space between walls when sheetrock is applied • Support bar sits in two slotted tabs on the backside of SV1218 and mounts from stud to stud horizontally • Support bar pre-measured for 24" stud cavities (score lines provided for 16" stud cavities) with pre-punched holes at stud locations for left or right stud installation • Add optional SVX adapter plate to expand box capacity • Optional SVX adapter plate installs to pre-punched and tapped holes on sides of SV1218 • Up to two SVX plates can be added with 24" stud spacing • One SVX plate can be added with 16" stud spacing • SVX adapter plate accepts all device covers 11 for 4" and 4 ⁄16" boxes SV1218 mounted to floor track and studs with one 4" square box installed Floor-Track Vertical Mounting Bracket Cat. Std. Pkg. UPC Number Description Qty. Number SV1218 Floor-Track Vertical Mounting Bracket with Supporting Horizontal Cross Bar 10 78599103896 SVX Adapter Plate for Expanded Capacity of SV1218 25 78599103897 SBO16 Stud-to-Stud Horizontal Mounting Bracket SBO16/SBO24 Stud-to-Stud Horizontal Mounting Brackets For flexibility to meet a variety of project requirements, the SBO16 and SBO24 stud-to-stud horizontal brackets mount at any height and feature an open design to enable box mounting anywhere across the horizontal plane. The SBO16 mounts in 16" stud cavities and holds 11 up to three 4" square or two 4 ⁄16" boxes. Designed for 24" stud cavities, the SBO24 accommodates five 4" 11 square or four 4 ⁄16" boxes. • Constructed of 24-gauge steel • Pre-measured on center for 16" (SBO16) or 24" SBO16 mounted to 16" studs (SBO24) stud spacing with one 4" square box installed 11 • SBO16 accepts three 4" square or two 4 ⁄16" boxes (deep or shallow) 11 • SBO24 accepts five 4" square or four 4 ⁄16" boxes (deep or shallow) • Can be mounted at any height to meet individual SBO24 Stud-to-Stud Horizontal Mounting Bracket project requirements • Versatile, open design enables mounting of box in any location across horizontal plane between studs • Mud ring mounts to front of bracket to set box in desired location 1 1 • Stamped rule on bracket with ⁄4", ⁄2", and 1" markings enables fast box setting SBO24 mounted to 24" studs with five 4" square boxes installed Stud-to-Stud Horizontal Mounting Brackets Cat. Std. Pkg. UPC Number Description Qty. Number SBO16 16" Stud-to-Stud Horizontal Mounting Bracket 25 78599103893 SBO24 24" Stud-to-Stud Horizontal Mounting Bracket 25 78599103895 Please ask your Thomas & Betts sales representative for a complete catalog Thomas & Betts Corporation Thomas & Betts Ltd. of quality Thomas & Betts electrical products or visit us at www.tnb.com. Electrical Division 700 Thomas Avenue For customer service, call 1-800-816-7809. For technical questions, call 1-888-862-3289. 8155 T&B Boulevard Iberville, Québec J2X 2M9 Memphis, TN 38125 450-347-5318 © 2005 Thomas & Betts Corporation. All rights reserved. Printed in the U.S.A. 11/05/500 GM-1256 901-252-5000