TRACO POWER ESP60-15SN

Why buy from GID?

Quality

We are industry veterans who take pride in our work

Protection

Avoid the dangers of risky trading in the gray market

Access

Our network of suppliers is ready and at your disposal

Savings

Maintain legacy systems to prevent costly downtime

Speed

Time is of the essence, and we are respectful of yours

Details

Part Number ESP60-15SN
Manufacturer TRACO POWER
Category Circuit Protection »  AC-DC Power Supply
Price Request Quote
Lead Time Request Quote

Description

60 W, Single Output, 15 VDC@4 A AC-DC Power Supply

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation
Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving
Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment
Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair
Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping
Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

Electronics Finder is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need an ESP60-15SN? We can help you find it at a competitive price!

Specifications

Manufacturer Traco Power
Manufacturers Part # ESP60-15SN
Brand TRACO POWER
Series ESP
Factory Pack Quantity 1
Dimensions 5.90 x 3.15 x 1.46"
Efficiency 81%
Input Voltage Nominal 115 VAC, 230 VAC
Isolation 3000 VAC
Mechanical Style Open / Enclosed Frame
Mounting Chassis
Number of Outputs 1
Operating Temperature - 10 to + 60°C
Output Amps 1 4 A
Output Voltage V1 Nominal 15 VDC
Power 60 W
Subcategory AC-DC Power Supply

Datasheet

Download "esp-datasheet.pdf" (476 KiB)

Extracted Text

Switching Power Supplies ESP Series, 18 –150 Watt Features CB Scheme ◆ Compact boxed power supplies with screw terminal block ◆ Universal input 85-264 VAC, 50/60 Hz ◆ Short circuit and overvoltage protection ◆ High efficiency ◆ International safety approvals ◆ Industrial grade components ◆ 3-year product warranty This range of compact switching power supplies are designed for all applications, where high reliability and long lifetime are important. They provide excellent electric specifications and full compliance to international EMC and safety requirements. Models Order code Output power Output voltage Output current max. Efficiency at 115 VAC at 230 VAC at 115 VAC at 230 VAC ESP 18-05SN 5 VDC 3.0 A 3.6 A 75 75 ESP 18-12SN 12 VDC 1.3 A 1.5 A 79 79 ESP 18-15SN 18 Watt 15 VDC 1.0 A 1.2 A 80 80 ESP 18-24SN 24 VDC 0.7 A 0.8 A 80 80 ESP 18-48SN 48 VDC 0.35 A 0.4 A 80 80 ESP 36-05SN 5 VDC 6.0 A 6.0 A 75 76 12 VDC 2.6 A 3.0 A 78 79 ESP 36-12SN ESP 36-15SN 36 Watt 15 VDC 2.1 A 2.5 A 79 80 ESP 36-24SN 24 VDC 1.4 A 1.5 A 80 81 ESP 36-48SN 48 VDC 0.7 A 0.8 A 80 81 ESP 60-05SN 5 VDC 10 A 10 A 73 75 ESP 60-12SN 12 VDC 4.3 A 5.0 A 78 80 ESP 60-15SN 60 Watt 15 VDC 3.5 A 4.0 A 79 81 ESP 60-24SN 24 VDC 2.2 A 2.5 A 80 82 ESP 60-48SN 48 VDC 1.1 A 1.1 A 80 82 ESP 75-05S 5 VDC 15 A 15 A 78 81 ESP 75-12S 12 VDC 6.5 A 6.5 A 82 86 ESP 75-15S 75 Watt 15 VDC 5.2 A 5.2 A 83 87 ESP 75-24S 24 VDC 3.2 A 3.2 A 83 87 ESP 75-48S 48 VDC 1.6 A 1.6 A 83 87 ESP 100-05S 5 VDC 20 A 20 A 80 82 ESP 100-12S 12 VDC 8.6 A 8.6 A 86 87 ESP 100-15S 100 Watt 15 VDC 7.0 A 7.0 A 84 86 ESP 100-24S 24 VDC 4.4 A 4.4 A 84 86 ESP 100-48S 48 VDC 2.2 A 2.2 A 84 86 ESP 150-05S 5 VDC 30 A 30 A 78 81 ESP 150-12S 12 VDC 13 A 13 A 82 86 ESP 150-15S 150 Watt 15 VDC 10 A 10 A 83 87 ESP 150-24S 24 VDC 6.5 A 6.5 A 83 87 48 VDC 3.3 A 3.3 A 83 87 ESP 150-48S http://www.tracopower.com Page 1 of 6 Obsolete Obsolete discontinued December 2013 Obsolete discontinued March 2016 Switching Power Supplies ESP Series 18–150 Watt Input Specifications Input voltage range – nominal 115 – 230 VAC – AC range (universal input) 85 – 264 VAC – DC range 110 – 350 VDC Input frequency 47 – 63 Hz Input current (at full load) Vin = 115 VAC Vin = 230 VAC ESP 18 models: 0.23 A typ. 0.33 A typ. ESP 36 models: 0.40 A typ. 0.65 A typ. ESP 60 models: 0.72 A typ. 1.1 A typ. ESP 75 models: 0.45 A typ. 0.95 A typ. ESP 100 models: 0.65 A typ. 1.3 A typ. ESP 150 models: 0.85 A typ. 1.9 A typ. Recommended circuit breaker up to 75 Watt models: 5 A characteristic C, or slow blow fuse 100 & 150 Watt models: 10 A Start-up time up to 60 Watt model: 100 ms max. other models: 800 ms max. at 230 VAC, 1700 ms at 115 VAC Earth leakage current 750 µA max. Output Specifications Output voltage adjustment range ±10 % Regulation – Input variation 5 VDC models: 0.2 % max. other models: 0.1 % max. – Load variation (0–100%) 5 VDC models: 0.8 % max. ≤ 60 W, other models: 0.4 % max. ≥ 75 W, other models: 0.2 % max. Temperature coefficient 0.02 %/K Minimum load not required Ripple and noise (20Mhz Bandwidth) 5 VDC models: 120 mV p-p max. Measured with output Capacitors:100 µF 12 – 24 VDC models: 150 mV p-p max. 100 µF Electrolytic and 0.1 µF film 48 VDC models: 200 mV p-p max. Output current limitation 105 – 120 % Inom. Short circuit protection indefinite, auto recovery Over voltage protection (Zener diode) 115 – 150 % Vout nom. Capacitive load 10’000 µF http://www.tracopower.com Page 2 of 6 Switching Power Supplies ESP Series 18–150 Watt General Specifications Temperature ranges – Operating –10°C to +60°C – Derating above +50°C all models 2 %/°C – Storage (non operating) –20°C to +85°C Humidity (non condensing) 85 % rel max. Switching frequency ≤ 60 W models: 45 to 170 kHz (frequency modulation PFM) ≥ 75 W models: 120 kHz typ. (puls width modulation PWM) Hold-up time up to 60 Watt model: 120 ms max. at 230 VAC, 20 ms at 115 VAC other models: 40 ms typ. Isolation voltage – Input/ Output 3‘000 VAC – Input/ Case 1‘500 VAC – Output/ Case 500 VAC Reliability /calculated MTBF – ESP 18 & 36 models: >200‘000 h (MIL-HDBK-217F, at +25°C, ground benign) – ESP 60 models: >150’000 h – other models >80’000 h ELectromagnetic compatibility (EMC), Emissions – Conducted RI suppression EN 55022, class B, FCC part 15, level B – Harmonic current emissions IEC/EN 61000-3-2, (for ≥ 75 W models) class D equipment ELectromagnetic compatibility (EMC), Immunity (all single output models) – Electrostatic discharge ESD IEC/EN 61000-4-2 4 kV/ 8 kV – RF field immunity IEC/EN 61000-4-3 10 mV/m – Electrical fast transients/burst immunity IEC/EN 61000-4-4 1 kV – Surge IEC/EN 61000-4-5 1 kV/ 2 kV – Voltage dip IEC/EN 61000-4-11 Safety standards UL 60950, IEC/EN 60950-1 Safety approvals – UL/cUL 60950 (1950) www.ul.com -> certifications -> File e188913 – CB report ESP 18 models: www.tracopower.com/products/esp18-cb.pdf according to IEC 60950-1 ESP 36 models: new report pending ESP 60 models: www.tracopower.com/products/esp60-cb.pdf ESP 75 models: www.tracopower.com/products/esp75-cb.pdf ESP 100 models: www.tracopower.com/products/esp100-cb.pdf ESP 150 models: www.tracopower.com/products/esp150-cb.pdf Degree of protection class I Environment – Vibration sine sweep, 10–50Hz, 0.5mm, 1 min. cycle 3 axes each 30 min. – Shock 20 G (3 axes, 3 times) Casing material stainless steel All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 6 L Switching Power Supplies ESP Series 18–150 Watt Outline Dimensions mm (inches) ESP 18 models: 15max. 86.5 (3.41) (0.59) 2 X M3 thread (bottom) +V -V N 32.0 17.0 62.0 ±0.5 (1.26) (0.67) (2.44±0.02) 2 X M3 thread (bottom) 66.0 ±0.5 9.5 (0.37) (2.60±0.02) Weight ESP 18 200 g (0.44 lb) ESP 36 300 g (0.66 lb) ESP 36 models: (4.53) 115.0 15max. (0.59) 17 87.0±0.5 (3.43±0.02) (0.67) +V -V FG L AC IN N 32.0 2xM3 (mounting holes) bottom (1.26) 2xM3 (mounting holes) 81.0±0.05 9.5 (0.37) (3.19±0.02) http://www.tracopower.com Page 4 of 6 A C I N F G (2.80) 71.0 (2.95) 75.0 7 57.0 ±0.5 15 (2.24±0.02) (0.28) (0.59) 7 61.0±0.5 15 (2.40±0.02) (0.59) (0.28) Switching Power Supplies ESP Series 18–150 Watt Outline Dimensions mm (inches) ESP 60 models: (5.30) 134.5 15max. (0.59) 110.0±0.5 (4.33±0.02) 18 +V -V FG AC L IN N 37.0 2x M3 (mounting holes) bottom (1.46) 2x M3 (mounting holes) 106.0±0.5 9.5 (4.17±0.02) (0.37) Weight ESP 60 480 g (1.06 lb) ESP 75 490 g (1.08 lb) ESP 75 models:  (6.378)  162.0 15.0 max. 35.5 114.5 ± 0.5 (4.508 ± 0.02) (0.59 max.) (1.398) +V 0 FG L AC IN N M 4 thread M 3 thread (bottom) M 3 thread 7.5 147.0 ± 0.5 (5.787 ± 0.02) (0.295) http://www.tracopower.com Page 5 of 6  (3.465)  88.0 (3.15) 80.5  38.5 (1.516)  18.0 (0.709) 18 66.5±0.5 7 (0.71) (2.71±0.02) (0.28) 42.5 ± 0.5 (1.673 ± 0.02) Switching Power Supplies ESP Series 18–150 Watt Outline Dimensions mm (inches) ESP 100 models: 187.0  (7.362) 40.0 20.0 132.0 ± 0.5 (5.197 ± 0.02) (0.787) (1.575) +S +V -V -S FG L AC IN N M 4 thread (bottom) M 4 thread 7.5 170.0 ± 0.5 (6.693 ± 0.02) (0.295) Weight ESP 100 690 g (1.52 lb) ESP 150 900 g (1.98 lb) ESP 150 models: (7.717) 196.0 15.5 20.0 max. 171.0 ± 0.5 (6.732 ± 0.02) (0.787 max.) (0.610) V Adj. +S +V -V -S FG L AC IN N M 4 thread (bottom) M 4 thread 176.5 ± 0.5 (6.949 ± 0.02) 10.0 (0.394) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. January 21. 2016 www.tracopower.com Page 6 of 6 107.0 (4.213)  93.0  (3.661) 39.0  (1.535)  45.0 18.0 (0.709) (1.772) 21.0 41.0 21.0 88.5 ± 0.5 (3.484 ± 0.02) 8.5 (1.614) (0.827) (0.335) (0.827)

Related Products

TRACO POWER
100 W, Single Output, 5 VDC@20 A AC-DC Power Supply
TRACO POWER
100 W, Single Output, 24 VDC@4.4 A AC-DC Power Supply
TRACO POWER
150 W, Single Output, 5 VDC@30 A AC-DC Power Supply
TRACO POWER
150 W, Single Output, 12 VDC@13 A AC-DC Power Supply
TRACO POWER
36 W, Single Output, 12 VDC@3 A AC-DC Power Supply
TRACO POWER
36 W, Single Output, 15 VDC@2.5 A AC-DC Power Supply

Disclaimer

Any product names, logos, brands, and other trademarks or media featured or referred to on Electronics Finder are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

Electronics Finder is a GID Industrial website.
GID Industrial Logo
Copyright © 2023 GID Holdings LLC, All Rights Reserved.
Page generated in 0.036 seconds.