TRACO POWER SHV12-0.5K6000N
Specifications
Manufacturer
Traco Power
Manufacturers Part #
SHV12-0.5K6000N
Industry Aliases
SHV 12-0.5 K 6000 N
Brand
TRACO POWER
Series
SHV
Factory Pack Quantity
1
Dimensions
5.16 x 0.83 x 0.55"
Input Voltage Nominal
12 VDC
Mechanical Style
Non-Isolated / POL
Mounting
Through Hole
Number of Outputs
1
Operating Temperature
- 10 to + 60°C
Output Amps 1
0.006 A
Output Voltage V1 Nominal
- 500 VDC
Power
3 W
Subcategory
DC-DC Converter
Datasheet
Extracted Text
High Voltage Power Supplies THV Series, 2 – 3 Watt Features ◆ Compact high voltage power supplies ◆ Full SMD design with ceramic capacitors for highest reliability ◆ Positive or negative polarity models ◆ PCB- and flying lead versions ◆ Excellent output stability ◆ Low temperature coefficient ◆ Ultra low ripple ◆ Remote voltage programming 0 to 100 % ◆ Short circuit protection The THV / SHV series are regulated miniature high voltage power modules ◆ Shielded metal case using SMD and hybrid technology. They are designed for PCB mounting ◆ 3-year product warranty (THV series) or chassis mounting (SHV series). The use of high stability compo- nents guarantees a minimal temperature drift and a very stable output voltage. Typical applications for these high voltage power supplies are photomultiplier tubes, gas chromatography, analytical instruments and wherever where small size and high output voltage stability is requested. Models Order code Input voltage range Output voltage Output current max.* Case THV 12-180P 0...+180 VDC 12 mA A THV 12-180N 0...–180 VDC 12 mA A THV 12-300P 0...+300 VDC 10 mA A THV 12-300N 12 VDC 0...–300 VDC 10 mA A 10.8 – 13.2 VDC THV 12-350P 0...+350 VDC 7 mA A THV 12-350N 0...–350 VDC 7 mA A THV 12-500P 0...+500 VDC 6 mA B THV 12-500N 0...–500 VDC 6 mA B THV 12-1000P 0...+1000 VDC 2 mA B 0...–1000 VDC 2 mA B THV 12-1000N 12 VDC THV 12-1500P 0...+1500 VDC 1.3 mA B 10.8 – 16.5 VDC 0...–1500 VDC 1.3 mA B THV 12-1500N THV 12-2000P 0...+2000 VDC 1 mA B 0...–2000 VDC 1 mA B THV 12-2000N SHV 12-0.5 K 6000P 12 VDC 0...+500 VDC 6 mA C SHV 12-0.5 K 6000N 10.8 – 13.2 VDC 0...–500 VDC 6 mA C SHV 12-1.0 K 2000P 0...+1000 VDC 2 mA C SHV 12-1.0 K 2000N 0...–1000 VDC 2 mA C 12 VDC SHV 12-1.5 K 1300P 0...+1500 VDC 1.3 mA C SHV 12-1.5 K 1300N 10.8 – 16.5 VDC 0...–1500 VDC 1.3 mA C SHV 12-2.0 K 1000P 0...+2000 VDC 1 mA C SHV 12-2.0 K 1000N 0...–2000 VDC 1 mA C *see page 2 for max. output current vs output voltage Appendix P for positive output polarity / Appendix N for negative output polarity http://www.tracopower.com Page 1 of 4 Output voltage set value High Voltage Power Supplies THV Series 2 – 3 Watt Input Specifications Input voltage 180, 300, 350 & 500 VDC models: +10.8 to +13.2 VDC other VDC models: +10.8 to +16.5 VDC Reverse voltage protection none Conducted noise (input) internal filter Output Specifications Max. output current vs output voltage 100 100% output 80 60 40 50% output 20 0 0 (%) 100% Output current (lo) Voltage set accuracy ±5 % Voltage adjustement range 0 – 100 % (adjustable with external voltage 0 to +4 VDC or with 5 kOhm variable resistor) Remote On/Off control (not for 180, 300, 350 VDC models) On = pin 2 to pin 5 open Off = pin 2 to pin 5 short Regulation – Input variation Vin min. to Vin max. 0.03 % max. – Load variation 0 – 100 % 0.5 % max. Ripple and noise 180, 300 & 350 VDC models: 30 mVpk-pk typ. (20 MHz Bandwidth) 500 VDC models: 10 mVpk-pk typ. 1.0, 1.5 & 2.0 kVDC models: 8 mVpk-pk typ. Temperature coefficient ±0.01 %/K Stability 0.05 % 8h after warm-up time Output current limitation 105 % of lout max., fold back Short circuit protection indefinite, automatic recovery General Specifications Temperature ranges – Operating –10°C to +60°C – Case temperature +95°C max. – Storage –25°C to +85°C Derating 4 %/K above 50°C Humidity (non condensing) 95 % rel H max. Efficiency 60 – 65 % Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >300‘000 h Isolation (Input/Output) – Voltage none (–Vin,Common,Case are tied together internally) Switching frequency 125 kHz typ. (fixed) Vibration 5 – 100 Hz amplitude 10 mm pk-pk 10 – 55 Hz acceleration 2 G Thermal shock acceleration 20 G max. time 11 ms. Environmental compliance – Reach www.tracopower.com/overview/thv – RoHS RoHS Directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 High Voltage Power Supplies THV Series 2 – 3 Watt Physical Specifications Casing material Steel chrome-nickel plated Weight THV models case A : 47 g (1.66 oz) THV models case B : 65 g (2.29 oz) SHV models : 98 g (3.46 oz) Soldering temperature max. 265°C / 10 sec. Connection Diagram Connection for remote control by variable resistor 1 6 +Vin HV out THV Series + + C1 C2 Load = 180, 300, 350 Vout 47 µF 4700 pF – – –Vin Vout Com 100% 2 5 43 Vref Vadj 80% R2 R1 60% VR = 5 kOhm 40% 20% 1 7 +Vin HV out 0% + R1 0 Ohm 5 kOhm + THV/ SHV Series C1 C2 R2 5 kOhm 0 Ohm Load = 47 µF 500, 1.0k, 1.5k, 2.0k Vout 4700 pF Resistance Control – – –Vin Vout Com 2 6 54 3 ON/OFFVref Vadj Open=ON SW1 Short=OFF R2 R1 VR = 5 kOhm Connection for remote control voltage control 1 6 +Vin HV out + THV Series + C1 Load C2 = 180, 300, 350 Vout – 47 µF 4700 pF – –Vin Vout Com 2 5 43 100% Vref Vadj 80% (open) +– = 60% Remote voltage control 0 – 4 V 40% 20% 1 7 +Vin HV out 0% THV/ SHV Series + 1V 2V 3V 4V + C1 C2 Load 500, 1.0k, 1.5k, 2.0k Vout Voltage Control = 47 µF 4700 pF – – –Vin Vout Com 2 6 54 3 ON/OFFVrefVadj Open=ON SW1 Short=OFF +– (open) = Remote voltage control 0 – 4 V All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 Output Voltage [%] Output Voltage [%] High Voltage Power Supplies THV Series 2 – 3 Watt Outline Dimensions Pin-Out Case A 1– 4 5 6 Pin Case A Case B 1 +Vin (Vcc) +Vin (Vcc) 2 27.94 15.24 17.78 2 –Vin (GND) –Vin (GND) (0.08) (1.1) (0.6) (0.7) 3 x 2.54 3 V adj. V adj. (3 x 0.1) 12 80 4 V ref. V ref. (0.47) (3.15) 5 Common ON/OFF 6 Vout Common no pin Vout 7 Case B 1 – 5 6 7 7.62 38.10 40.64 2 (1.5) (1.6) (0.3) (0.08) 4 x 2.54 (4 x 0.1) 12 110 (4.33) (0.47) 4.0 (0.16) 6 1– 5 Case C 7 4.0 (0.16) 4.5 131 (0.18) (5.16) Case C Pin-Out Lead length 250 mm (10.0) Pin Lead color Case C 1 red +Vin (Vcc) 2 black –Vin (GND) 3 yellow V adj. Dimensions in [mm], () = Inch 4 orange V ref. Pin diameter: 0.65 ±0.05 (0.03 ±0.002) 5 blue ON/OFF Tolerances: ±0.5 (±0.02) 6 black Common 7 red Vout Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. August 17. 2015 www.tracopower.com Page 4 of 4 15.5 (0.61) 19.8 19.8 (0.78) (0.78) 25.0 (0.98) 25.0 14 (0.98) 5.5 (0.55) (0.22) 21 (0.83) 3.5 (0.14)
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the SHV12-0.5K6000N?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods