TRACO POWER TBLC75-124

Why buy from GID?

Quality

We are industry veterans who take pride in our work

Protection

Avoid the dangers of risky trading in the gray market

Access

Our network of suppliers is ready and at your disposal

Savings

Maintain legacy systems to prevent costly downtime

Speed

Time is of the essence, and we are respectful of yours

Details

Part Number TBLC75-124
Manufacturer TRACO POWER
Category Circuit Protection »  AC-DC Power Supply
Price Request Quote
Lead Time Request Quote

Description

75 W, Single Output, 24 VDC@3.1 A AC-DC Power Supply

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation
Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving
Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment
Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair
Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping
Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

Electronics Finder is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need a TBLC75-124? We can help you find it at a competitive price!

Specifications

Manufacturer Traco Power
Manufacturers Part # TBLC75-124
Industry Aliases TBLC 75-124
Brand TRACO POWER
Series TBLC
Factory Pack Quantity 1
Cooling Method Convection
Dimensions 3.52 x 2.83 x 2.34"
Efficiency 89%
Input Voltage Nominal 240 VAC, 100 VAC
Isolation 3000 VAC
Mechanical Style DIN Rail Mount
Mounting DIN Rail
Number of Outputs 1
Operating Temperature - 25 to + 70°C
Output Amps 1 3.1 A
Output Voltage V1 Nominal 24 VDC
Power 75 W
Subcategory AC-DC Power Supply

Datasheet

Download "tblc-datasheet.pdf" (528 KiB)

Extracted Text

Industrial Power Supplies TBLC Series, 6 – 90 W • Low profile case, module depth only 55 mm • Suitable for mounting in domestic installation panels • Very high efficiency and low standby power -> compliance to ECO-Standard • High power density • Low output ripples and spikes • Suitable for household appliance and industrial applications • For distributed power • UL 1310 class II, NEC class 2 compliance • UL 508 listed • Universal input range 85 to 264 VAC CB • Operating temperature range: Scheme UL508 UL60950-1 –25°C to +70°C This new DIN-Rail mounting power supplies are designed for industrial and resi- • Adjustable output voltage dential applications. They are lower cost than the existing TBL range, with similar • Short circuit and overload protection electrical specifications. Additionally, they fully comply to the new standby power • DC–OK indicator LED and efficiency requirements (ECO Standard). They are intended for connect- ing as class II devices, so the safety earth connection is not required. They are mountable in flat racks due to their small dimensions in depth. Their dimensions comply to the DIN 43880 standard. Models Order Code Output Power Output Voltage* Output Current Efficiency (max.) (nom.)(adjustable) (max.) (typ.) TBLC 06-105 6 W 5.0 VDC 1.2 A 74 % TBLC 06-112 6 W 12 VDC 0.5 A 81 % TBLC 06-124 6 W 24 VDC 0.25 A 79 % TBLC 15-105 12 W 5.0 VDC 2.4 A 81 % TBLC 15-112 15 W 12 VDC 1.25 A 85 % TBLC 15-124 15 W 24 VDC 0.63 A 85 % TBLC 25-105 20 W 5.0 VDC 4.0 A 82 % TBLC 25-112 24 W 12 VDC 2.0 A 86 % 24 VDC 1.05 A 87 % TBLC 25-124 25 W TBLC 50-112 48 W 12 VDC 4.0 A 88 % TBLC 50-124 50 W 24 VDC 2.1 A 89 % TBLC 75-112 72 W 12 VDC 6.0 A 89 % TBLC 75-124 75 W 24 VDC 3.1 A 89 % TBLC 90-112 90 W 12 VDC 7.5 A 90 % TBLC 90-124 90 W 24 VDC 3.75 A 90 % http://www.tracopower.com Page 1 of 5 TBLC Series, 6 – 90 W Input Specifications Input voltage – nominal ranges 100 – 240 VAC; 50/60 Hz – effective ranges 85 – 264 VAC; 47-63 Hz (below 100 VAC a derating of 2 %/V is required) Input voltage frequency 47 – 63 Hz No load power consumption 6–50 W models: < 0.3 W 75–90 W models: < 0.5 W Harmonic limits EN 61000-3-2, class A Leakage current 0.25 mA max. Inrush current 6–50 W models: 15/30 A (115/230 VAC) 75–90 W models: 25/50 A (115/230 VAC) Output Specifications Output voltage / current 5 VDC models: 5.0 – 5.5 VDC* 12 VDC models: 12.0 – 16.0 VDC* 24 VDC models: 24.0 – 28.0 VDC* Regulation – Input variation 0.3 % max. – Load variation (10–90 %) 0.3 % max. Hold-up time 60 ms min. (at 230 VAC) 15 ms typ. (at 115 VAC) Start-up – Start up behavior TBLC 75-112 and 90-112: 0-75 % constant current load other models: 0-100 % constant current load – Start up time 1 s max. Ripple and Noise (20 MHz bandwidth) 50 mVp-p max. Current limit (continuous) 105 – 130 % of Iout nom., constant current Short circuit current TBLC 75-112 and 90-112: 70 – 90 % of Iout nom. (typ.), foldback other models: 120 – 200 % of I out nom Output overvoltage protection 150 % of Vout nom. (typ.) DC OK signal – trigger threshold ON > 95 % of the set voltage General Specifications Operating temperature –25°C to +70°C derating above +55ºC: 2.5 %/K Storage temperature –40°C to +85°C Temperature coefficient 0.02 %/K Cooling convection cooling, no internal fan Pollution degree 2 Humidity (non condensing) 5–95 % rel. H max. Altitude during operation 4800 m max. Isolation – I/O isolation 3000 VAC (4242 VDC) Class of protection safety class II Degree of protection IP 20 (IEC/EN 60529) Reliability, calculated MTBF (at 25°C acc. to IEC 61709) > 1.9 Mio. h * Output voltage can be adjusted as indicated. However, output power has to be maintained at nominal value. This means the output nominal current has to be reduced in accordance with the increase of output voltage. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 5 TBLC Series, 6 – 90 W General Specifications (continued) Safety standards – Information technology equipment IEC/EN 60950-1, UL 60950-1 – Household applications IEC/EN 60335-1 – Safety of machinery EN 60204 – Safety for power electronic converter systems IEC/EN 62477 – Industrial control equipment UL 508 – Class II Power units UL 1310 – NEC class 2 UL 1310 (not TBLC 90-xxx and TBLC 75-112) – Electronic equipment for power installation EN 50178 – Safety of transformers EN 61558-2-8, EN 61558-2-16 – Certification documents www.tracopower.com/overview/tblc Electromagnetic compatibility (EMC), Emissions EN 61000-6-3, EN 61204-3 – Conducted RI suppression on input EN 55032 class B – Conducted disturbance on output TBLC 50/75/90: EN 55014 class B, CISPR 16-1-1 – Radiated RI suppression EN 55032 class B – Harmonic current emissions IEC 61000-3-2 class A Electromagnetic compatibility (EMC), Immunity EN 61000-6-2, EN 61204-3 – Electrostatic discharge (ESD) IEC/EN 61000-4-2 4 kV/8 kV criteria B – Radiated RF field immunity IEC/EN 61000-4-3 10 V/m criteria A – Electrical fast transient / burst immunity IEC/EN 61000-4-4 2 kV criteria B – Surge immunity IEC/EN 61000-4-5 1 kV/2 kV criteria B – Immunity to conducted RF disturbances IEC/EN 61000-4-6 10 V criteria A – Power frequency field immunity IEC/EN 61000-4-8 30 A/m criteria A – Mains voltage dips and interruptions IEC/EN 61000-4-11 0% / 20 ms 40% / 200 ms 70% / 500 ms Environment – Vibration acc. IEC 60068-2-6 3 axis, 2 g sine sweep, 10 – 150 Hz, 90 min – Shock acc. IEC 60068-2-27 3 axis, 30 g half sine, 11 ms Enclosure material V2 rated plastic Mounting – DIN-rail mounting for DIN-rails as per EN 50022 – 35x15/7.5 (snap-on with self-locking spring) (included) Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Connection screw terminal with combi-type screw heads 2 for wire size 0.5 – 2.5 mm http://www.tracopower.com Page 3 of 5 TBLC Series, 6 – 90 W Function Specification Block Diagram Current Limit Characteristic nominal (100%) Vout other models TBLC 75-112/90-112 I short = 70 - 90 % of I nominal I short = 120 - 200% of I nominal 70% 90% 120% 200% Iout The load characteristic is designed to accomplish reliable start-up of heavy loads. Note: All 6 Watt models (TBLC 06-xxx) implement a pulsing power characteristic when in overload or short circuit conditions. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 4 of 5 TBLC Series, 6 – 90 W Outline Dimensions 59.5 mm DIN 43880 Size 1 Weigth Model Width A [g] TBLC 06 18 mm 60 TBLC 15 27 mm 80 TBLC 25 36 mm 110 TBLC 50 54 mm 180 TBLC 75 72 mm 220 TBLC 90 90 mm 280 43.5 mm A 54.5 mm Tolerances: ±0.5 mm Wall Mounting Bracket Instead of on a DIN-rail, the modules can also be mounted on a chassis or wall with help of a mounting bracket which is supplied as standard with each power supply. Wiring Description Wire size Torque AC Input all models: L, N only (2 pin terminal) AWG 20 – 14 / 0.5 – 2.5 mm² max. 0.5 Nm DC Output 6 – 50 W models: single terminal AWG 20 – 14 / 0.5 – 2.5 mm² max. 0.5 Nm DC Output 75 – 90 W models: double terminal AWG 20 – 14 / 0.5 – 2.5 mm² max. 0.5 Nm © Copyright 2017 Traco Electronic AG Specifications can be changed without notice! Rev. December 6, 2017 www.tracopower.com Page 5 of 5 45 mm 89.5 mm

Related Products

TRACO POWER
100 W, Single Output, 15 VDC@7 A AC-DC Power Supply
TRACO POWER
150 W, Single Output, 5 VDC@30 A AC-DC Power Supply
TRACO POWER
150 W, Single Output, 24 VDC@6.5 A AC-DC Power Supply
TRACO POWER
18 W, Single Output, 12 VDC@1.5 A AC-DC Power Supply
TRACO POWER
18 W, Single Output, 15 VDC@1.2 A AC-DC Power Supply
TRACO POWER
18 W, Single Output, 24 VDC@0.8 A AC-DC Power Supply

Disclaimer

Any product names, logos, brands, and other trademarks or media featured or referred to on Electronics Finder are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

Electronics Finder is a GID Industrial website.
GID Industrial Logo
Copyright © 2024 GID Holdings LLC, All Rights Reserved.
Page generated in 0.901 seconds.