TDN3-1212WI - TRACO POWER - Electronics Finder

Description

3 W, 4.5 -18 VDC Vin, Single Output, 12 V@0.25 A Datacom/Industrial/OEM/Commercial DC-DC Converter

Part Number

TDN3-1212WI

Price

Request Quote

Manufacturer

TRACO POWER

Lead Time

Request Quote

Category

Capacitors » DC-DC Converter

Specifications

Manufacturer

Traco Power

Manufacturers Part #

TDN3-1212WI

Industry Aliases

TDN 3-1212WI

Brand

TRACO POWER

Series

TDN 3WI

Factory Pack Quantity

Application

General Purpose

Connection Type

Through Hole

Dimensions

0.52 x 0.36 x 0.39"

Efficiency

83%

Environmental Conditions

General Purpose

Industry

Datacom, Industrial, OEM/Commercial

Input Type

4:1

Input Voltage Nominal

12, 5

Isolation

1500 VDC

Mechanical Style

Isolated

Mounting

PCB Mount

Number of Outputs

Operating Temperature

-40 to +70°C, Full Load

Output Amps 1

0.25 A

Output Voltage V1 Nominal

12 V

Power

3 W

Subcategory

DC-DC Converter

Datasheet

TDN3-WI.pdf

224 KiB

Download

Extracted Text

TRACO POWER TDN3-WI Series 3 Watt DC/DC Converters DC/DC Converter TDN 3WI Series, 3 Watt Measures: 0.52 x 0.36 x ”0.39” ◆ Ultra compact DIP package 0.52 x 0.36 x 0.40 inch ◆ I/O-isolation 1‘500 VDC ◆ Fully regulated outputs ◆ Operating temperature range -40°C to +70°C without derating ◆ Short circuit protection ◆ Remote On/Off ◆ 3-year product warranty ◆ Built-in EN55022 class A filter The TDN 3WI series with 4:1 input voltage range is a selection of 3 Watt regulated dc/dc-converters. They come in a very compact DIP package (0.52 x 0.36 x 040 inch). Models Order code Input voltage Output voltage Output current max. Efficiency typ. TDN 3-1210WI 3.3 VDC 700 mA 76 % TDN 3-1211WI 5.0 VDC 600 mA 80 % TDN 3-1212WI 12 VDC 250 mA 83 % 4.5 – 18 VDC TDN 3-1213WI 15 VDC 200 mA 84 % TDN 3-1215WI 24 VDC 125 mA 82 % TDN 3-1221WI ±5.0 VDC ±300 mA 80 % TDN 3-1222WI ±12 VDC ±125 mA 82 % TDN 3-1223WI ±15 VDC ±100 mA 82 % TDN 3-2410WI 3.3 VDC 700 mA 77 % TDN 3-2411WI 5.0 VDC 600 mA 80 % TDN 3-2412WI 12 VDC 250 mA 83 % Models 9 – 36 VDC TDN 3-2413WI 15 VDC 200 mA 83 % TDN 3-2415WI 24 VDC 125 mA 82 % TDN 3-2421WI ±5.0 VDC ±300 mA 80 % TDN 3-2422WI ±12 VDC ±125 mA 82 % TDN 3-2423WI ±15 VDC ±100 mA 82 % TDN 3-4810WI 3.3 VDC 700 mA 77 % TDN 3-4811WI 5.0 VDC 600 mA 80 % TDN 3-4812WI 12 VDC 250 mA 83 % 18 – 75 VDC TDN 3-4813WI 15 VDC 200 mA 83 % TDN 3-4815WI 24 VDC 125 mA 82 % TDN 3-4821WI ±5.0 VDC ±300 mA 80 % TDN 3-4822WI ±12 VDC ±125 mA 82 % TDN 3-4823WI ±15 VDC ±100 mA 82 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tdn3-wi-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TDN3-WI Series TDN 3WI Series, 3 Watt 3 Watt DC/DC Converters Measures: 0.52 x 0.36 x ”0.39” Input Specifications Input current no load 12 Vin models: 40 mA typ. 24 Vin models: 25 mA typ. 48 Vin models: 13 mA typ. Surge voltage (1 sec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reflected ripple current 20 mAp-p typ. Input filter internal capacitor Conducted noise EN 55022 class A internal filter ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria A –external input capacitor all models: Nippon chemi-con KY 220µF/100V Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1 % max. Voltage balance (dual output models) 1 % max. Regulation – Input variation 0.2 % max. – Load variation 0 – 100 % single output: 1 % max. dual output: 1 % max. (balanced load) cross regulation - dual output: 5 % max. (asymmetrical load 25 % / 100 %) Ripple and noise (20 MHz Bandwidth) 50 mVp-p typ. Start up time – Power ON 10 ms max. (constant resistive load) – Remote ON 10 ms max. Transient response (25% load step change) 500 μs typ. Short circuit protection continuous, automatic recovery Capacitive load –Single output 3.3 VDC models: 4700 µF max. 5.0 VDC models: 2530 µF max. 12 VDC models: 1220 µF max. 15 VDC models: 1000 µF max. 24 VDC models: 470 µF max. –Dual output ±5.0 VDC models: 1470 µF max. (each output) ±12 VDC models: 680 µF max. (each output) +15 VDC models: 470 µF max. General Specifications Temperature ranges – Operating (convection cooling 20LFM, 0,1m/s) –40°C to +70°C (without derating) – Case temperature +95°C max. – Storage temperature –55°C to +125°C Derating 2.9%/K above 70°C Humidity (non condensing) 95 % rel H max. Isolation voltage – I/O isolation voltage (60 sec.) 1’500 VDC Isolation capacitance (input/output) 50 pF typ. Isolation resistance (input/output) >1 Gohm Altitude during operation tbd Temperature coefficient ±0.02 %/K typ. Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) 5‘627‘000 h All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 2 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tdn3-wi-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 9.1 (0.52) 9.1 (0.52) TRACO POWER TDN3-WI Series 3 Watt DC/DC Converters TDN 3WI Series, 3 Watt Measures: 0.52 x 0.36 x ”0.39” Switching frequency 100 kHz min. Thermal shock & vibration MIL-STD-810F Remote On/Off –On: open circuit or high impedance –Off: 2 – 4 mA current applied via 1kOhm resistor –Off idle current: 2.5 mA max. Safety standards UL 60950-1 IEC/EN 60950-1 – Certification documents (pending) www.tracopower.com/overview/tdn3wi Environmental compliance – Reach www.tracopower.com/overview/tdn3wi – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material non-conducting FR4 (UL 94V-0 rated) Potting material Silicone (UL 94V-0 rated) Pin material tinned copper Package weight 2.7g (0.10oz) Soldering temperature max. 260°C / 10 sec. Outline Dimensions DIP package: 10.2 (0.40) 13.2 (0.52) 5.07 (0.2) 9.9 (0.39) 1 5 Pin-Out 2 6 Pin Single Dual 7 1 +Vin (Vcc) +Vin (Vcc) 4 2 –Vin (GND) –Vin (GND) 4 On/Off On/Off 4.5 (0.18) bottom viev 5 no con. –Vout 6 –Vout Common 7 +Vout +Vout SMD package (on demand): 14.2 (0.56) 10.2 (0.40) 13.2 (0.52) 9.9 (0.39) 4.8 (0.19) 1 5 2 6 7 4 Dimensions in [mm], () = Inch 0.25 (0.01) Tolerances: x.xx ±0.5 (±0.02) bottom viev x.xxx ±0.25(±0.01) Pin pitch tolerances ±0.25 (±0.01) pin dimension tolerance ±0.1 (±0.004) Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Rev. September 15. 2015 Page 3 of 3 www.tracopower.com Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tdn3-wi-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 3 x 2.0 (3 x 0.08) 3 x 2.0 (3 x 0.08) 0.6 (0.024) 0.6 (0.024)

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products