TRACO POWER TDN5-WI SERIES 5 Watt Ultra-WINde 4:1 Input Range DC-DC Converter Measures: 0.52 X 0.36 X 0.40” DC/DC Converter TDN 5WI Series, 5 Watt • Ultra compact DIP package 0.52 x 0.36 x 0.40 inch • I/O-isolation 1‘500 VDC • Fully regulated outputs • Operating temperature range –40°C to +75°C • Short circuit protection • Remote On/Off • 3-year product warranty The TDN 5WI Series redefines the power density of high performance DC/DC converters. The cubical package of only 1.23 cm3 encloses a sophisticated circuit which provides 5 Watt output power. They operate up to 50°C environment tem- perature at full load or up to 75°C with a 50% load de-rating. With 1500 VDC I/O- isolation voltage, external On/Off, and short current protection they cover a wide range of application when space is limited. The input of the converters is designed for a wide voltage range (4:1) and minimum load is not required. Models Order code Input voltage Output voltage Output current max. Efficiency typ. TDN 5-0910WI 3.3 VDC 1000 mA 76 % TDN 5-0911WI 5.0 VDC 1000 mA 80 % TDN 5-0912WI 12 VDC 420 mA 83 % 4.5 – 12 VDC TDN 5-0913WI 15 VDC 333 mA 83 % (5 VDC nominal) TDN 5-0915WI 24 VDC 210 mA 83 % TDN 5-0921WI ± 5.0 VDC ±500 mA 80 % TDN 5-0922WI ±12 VDC ±210 mA 83 % TDN 5-0923WI ±15 VDC ±168 mA 83 % TDN 5-2410WI 3.3 VDC 1000 mA 76 % Models TDN 5-2411WI 5.0 VDC 1000 mA 80 % TDN 5-2412WI 12 VDC 420 mA 83 % 9 – 36 VDC TDN 5-2413WI 15 VDC 333 mA 83 % (24 VDC nominal) TDN 5-2415WI 24 VDC 210 mA 83 % TDN 5-2421WI ± 5.0 VDC ±500 mA 80 % TDN 5-2422WI ±12 VDC ±210 mA 83 % TDN 5-2423WI ±15 VDC ±168 mA 84 % TDN 5-4810WI 3.3 VDC 1000 mA 76 % TDN 5-4811WI 5.0 VDC 1000 mA 81 % TDN 5-4812WI 12 VDC 420 mA 83 % 18 – 75 VDC TDN 5-4813WI 15 VDC 333 mA 83 % (48 VDC nominal) TDN 5-4815WI 24 VDC 210 mA 83 % TDN 5-4821WI ± 5.0 VDC ±500 mA 80 % TDN 5-4822WI ±12 VDC ±210 mA 83 % TDN 5-4823WI ±15 VDC ±168 mA 84 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 1 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tdn5-wi-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TDN5-WI SERIES TDN 5WI Series, 5 Watt 5 Watt Ultra-WINde 4:1 Input Range DC-DC Converter Measures: 0.52 X 0.36 X 0.40” Input Specifications Input current no load 5 Vin models: 80 mA typ 24 Vin models: 30 mA typ. 48 Vin models: 15 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 15 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reflected ripple current 5 Vin models: 40 mAp-p typ. 24 Vin models: 20 mAp-p typ. 48 Vin models: 15 mAp-p typ. Conducted noise EN 55022 class A or B with external components, see supporting documents ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria A –external input capacitor all models: Nippon chemi-con KY 220µF/100V Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1 % max. Voltage balance (dual output models) 1 % max. Regulation – Input variation 0.2 % max. – Load variation 0 – 100 % single output: 1 % max. dual output: 1 % max. (balanced load) cross regulation - dual output: 5 % max. (asymmetrical load 25 % / 100 %) Temperature coefficient ±0.02 %/K typ. Ripple and noise (20 MHz Bandwidth) 75 mVp-p typ. Start up time – Power ON 10 ms max. (constant resistive load) – Remote ON 10 ms max. Transient response (25% load step change) 500 μs typ. Short circuit protection continuous, automatic recovery Capacitive load –Single output 3.3 VDC models: 4400 µF max. 5.0 VDC models: 2200 µF max. 12 VDC models: 1220 µF max. 15 VDC models: 1000 µF max. 24 VDC models: 470 µF max. –Dual output ±5.0 VDC models: 1000 µF max. (each output) ±12 VDC models: 680 µF max. (each output) +15 VDC models: 440 µF max. (each output) General Specifications Temperature ranges – Operating (convection cooling 20LFM, 0,1m/s) –40°C to +75°C – Case temperature +95°C max. – Storage temperature –55°C to +125°C Derating 1.8%/K above 50°C Humidity (non condensing) 95 % rel H max. Isolation voltage – I/O isolation voltage (60 sec.) 1’500 VDC Isolation capacitance 50 pF max. Isolation resistance (@ 500 VDC) >1 Gohm Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) 2‘280‘000 h All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is r http://www.tracopowe esponsibility of each customer to thor r.com oughly test each product and part number under their unique parameters and environments to ensure a product will work pr Page 2 ooperly and r f 3 eliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tdn5-wi-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 9.1 (0.52) 9.1 (0.52) TRACO POWER TDN5-WI SERIES TDN 5WI Series, 5 Watt 5 Watt Ultra-WINde 4:1 Input Range DC-DC Converter Measures: 0.52 X 0.36 X 0.40” General Specifications Switching frequency 100 kHz min. Pulse frequency modulation. Thermal shock & vibration MIL-STD-810F Remote On/Off –On: open circuit or high impedance –Off: 2 – 4 mA current applied via 1kOhm resistor –Off idle current: 2.5 mA max. Safety standards UL 60950-1 IEC/EN 60950-1 – Certification documents see supporting documents Environmental compliance – Reach see supporting documents – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material non-conducting FR4 (UL 94V-0 rated) Potting material silicone (UL 94V-0 rated) Pin material tinned copper Package weight 2.7g (0.10oz) Soldering temperature max. 260°C / 6 sec Supporting Documents: www.tracopower.com/overview/tdn5wi Outline Dimensions DIP package: Pin-Out 10.2 (0.40) 13.2 (0.52) 9.9 (0.39) 5.07 (0.2) Pin Single Dual 1 +Vin (Vcc) +Vin (Vcc) 1 5 2 2 6 –Vin (GND) –Vin (GND) 7 4 On/Off On/Off 4 5 no con. –Vout 4.5 (0.18) bottom viev 6 –Vout Common 7 +Vout +Vout SMD package (on demand): 14.2 (0.56) 10.2 (0.40) 13.2 (0.52) 9.9 (0.39) 4.8 (0.19) Dimensions in [mm], () = Inch 1 5 Tolerances: x.xx ±0.5 (±0.02) 2 6 7 x.xxx ±0.25(±0.01) 4 Pin pitch tolerances ±0.25 (±0.01) pin dimension tolerance ±0.1 (±0.004) 0.25 (0.01) bottom viev Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. January 11. 2016 Page 3 of 3 www.tracopower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-tdn5-wi-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 3 x 2.0 3 x 2.0 (3 x 0.08) (3 x 0.08) 0.6 (0.024) 0.6 (0.024)