TDR3-1211SM-TR - TRACO POWER - Electronics Finder

Description

3 W, 9 -18 VDC Vin, Single Output, 5 VDC@0.6 A DC-DC Converter

Part Number

TDR3-1211SM-TR

Price

Request Quote

Manufacturer

TRACO POWER

Lead Time

Request Quote

Category

Capacitors » DC-DC Converter

Specifications

Manufacturer

Traco Power

Manufacturers Part #

TDR3-1211SM-TR

Lead Time

13 Week Lead Time

Industry Aliases

TDR3-1211SM-TR

Brand

TRACO POWER

Series

TDR 3

Factory Pack Quantity

200

Dimensions

0.74 x 0.50 x 0.35"

Efficiency

81%

Input Voltage Nominal

12 VDC

Isolation

1500 VDC

Mechanical Style

Isolated

Mounting

SMD/SMT

Number of Outputs

Operating Temperature

- 40 to + 85°C

Output Amps 1

0.6 A

Output Voltage V1 Nominal

5 VDC

Power

3 W

Subcategory

DC-DC Converter

Datasheet

tdr3wi.pdf

315 KiB

Download

Extracted Text

DC/DC Converters TDR 3WI Series, 3 Watt UL 60950-1 Features ◆ Compact design in SMD or DIP package ◆ Ultra wide 4:1 input voltage range ◆ Fully regulated outputs ◆ Low ripple and noise ◆ No minimum load required ◆ Temperature range –40°C to +85°C ◆ I/O isolation 1600 VDC ◆ Continuous short-circuit protection ◆ Remote On/Off control ◆ Fully RoHS compliant The TDR-3WI series is a family of compact 3 W DC/DC converters with 4:1 input ◆ 3-year product warranty voltage ranges and tightly regulated output voltages even under no load conditions. The product is available in SMD-package or in DIP-package. They work with high efficiency over the full load range and come with a remote On/Off input. The usability in temperature ranges of up to +85°C, continuous short circuit protec- tion and excellent immunity against environmental influences make these converters very reliable. A TDR-3WI converter is the ideal solution for space critical high end applications in communication equipment, instrumentation and industrial electronics. Models Order code Order code Output current Input voltage range Output voltage Efficiency typ. DIP models SMD models max. TDR 3-1211WI TDR 3-1211WISM 5.0 VDC 600 mA 81 % TDR 3-1212WI TDR 3-1212WISM 12 VDC 250 mA 82 % 4.5 – 18 VDC TDR 3-1213WI TDR 3-1213WISM 15 VDC 200 mA 82 % (12 VDC nominal) TDR 3-1222WI TDR 3-1222WISM ±12 VDC ±125 mA 82 % TDR 3-1223WI TDR 3-1223WISM ±15 VDC ±100 mA 81 % TDR 3-2411WI TDR 3-2411WISM 5.0 VDC 600 mA 80 % TDR 3-2412WI TDR 3-2412WISM 12 VDC 250 mA 82 % 9 – 36 VDC TDR 3-2413WI TDR 3-2413WISM 15 VDC 200 mA 82 % (24 VDC nominal) TDR 3-2422WI TDR 3-2422WISM ±12 VDC ±125 mA 82 % TDR 3-2423WI TDR 3-2423WISM ±15 VDC ±100 mA 81 % TDR 3-4811WI TDR 3-4811WISM 5.0 VDC 600 mA 80 % TDR 3-4812WI TDR 3-4812WISM 12 VDC 250 mA 83 % 18 – 75 VDC TDR 3-4813WI TDR 3-4813WISM 15 VDC 200 mA 82 % (48 VDC nominal) TDR 3-4822WI TDR 3-4822WISM ±12 VDC ±125 mA 82 % TDR 3-4823WI TDR 3-4823WISM ±15 VDC ±100 mA 81 % www.tracopower.com Page 1 of 4 DC/DC Converters TDR 3WI Series 3 Watt Input Specifications Input current at no load (nominal input voltage) 12 Vin models: 40 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 13 mA typ. Input current at full load (nominal input voltage) 12 Vin models: 330 mA typ. 24 Vin models: 165 mA typ. 48 Vin models: 80 mA typ. Surge voltage (1 s max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. EMC emissions EN 55032 class A/B (with external components) – Application note for filter class A/B proposal www.tracopower.com/overview/tdr3wi ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3 10 V/m, perf. criteria A Fast transient / Surge EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria A with external input capacitor e.g. Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Power frequency magnetic field EN 61000-4-8, 100 A/m, perf. criteria A Reflected ripple current 12 Vin models: 80 mAp-p typ. (measured with input filter according class A) 24 Vin models: 40 mAp-p typ. 48 Vin models: 30 mAp-p typ. Output Specifications Voltage set accuracy ±1 % max Regulation – Input variation (Vin min. to Vin max.) 0.2 % max. – Load variation (0 – 100 %) single output models: 1.0 % max. dual output models: 1.0 % max. balanced load – Load variation (10 – 90 %) single output models: 0.5 % max. dual output models: 0.8 % max. balanced load – Load cross regulation (25 / 100 %) 5.0 % max. (dual output models) Minimum load 0 % of rated max. load Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz bandwidth) 30 mVp-p typ. Start up time – Power On 5 ms typ. (constant resistive load) – Remote On 5 ms typ. Transient response setting time (25 % load step change) 250 µs typ. Short circuit protection continuous, automatic recovery Capacitive load 5 Vout models: 1680 µF max. 12 Vout models: 820 µF max. 15 Vout models: 680 µF max. ±12 Vout models: 470 µF max. (each output) ±15 Vout models: 330 µF max. (each output) General Specifications Temperature ranges – Operating –40°C to +85°C – Storage –55°C to +125°C – Case temperature –40°C to +100°C Load derating 3.3 %/K above +70°C All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 2 of 4 DC/DC Converters TDR 3WI Series 3 Watt General Specifications (continued) Humidity (non condensing) 5 – 95 % rel. H max. Thermal shock acc. MIL-STD-810F Vibration acc. MIL-STD-810F Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >5.7 Mio h Isolation voltage (60 s) – Input/Output 1600 VDC Isolation capacitance – Input/Output 50 pF max. Isolation resistance – Input/Output (500 VDC) >1 GOhm Safety approvals – UL/cUL 60950-1 www.ul.com -> certifications -> File e188913 – Certification documents www.tracopower.com/overview/tdr3wi Switching frequency 100 kHz min. Remote On/Off – On: open or high impedance – Off: 2...4 mA current applied via 1KOhm resistor – Off stand by input current 2.5 mA max. Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Pysical Specifications Casing material non-conductive plastic (UL94V-0 rated) Package weight 4.5 g (0.16 oz) Soldering profile (for DIP models) 265°C / 10 s max. (wave soldering) Lead-free reflow solder process (for SMD models) J-STD-020D Moisture sensivity level (for SMD models) J-STD-033C level 2a Packaging – Tube 10 pcs packing unit – Tape & Reel (only SMD models, add suffix –TR) 200 pcs packing unit Supporting documents: www.tracopower.com/overview/tdr3wi and www.tracopower.com/overview/tdr3wism All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. www.tracopower.com Page 3 of 4 DC/DC Converters TDR 3WI Series 3 Watt Outline Dimensions DIP-Models Pin-Out Pin Single Dual 0.25 (0.01) 1 –Vin (GND) –Vin (GND) 13.55(0.533) Remote On/Off Remote On/Off 2 8.7 (0.35) 3.8 (0.15) 12.8(0.50) 6 NC Common 7 NC –Vout 8 7 8 +Vout +Vout 9 6 9 –Vout Common 14 +Vin (Vcc) +Vin (Vcc) NC = not to connect 2 14 1 Recommended Solder Pad SMD-Models Dimension: 18.1 (0.71) 0-4° 7.4 (0.29) 1.2 (0.05) 17.2(0.68) 8.7 (0.35) 12.8 (0.50) 8 7 9 6 2.0 (0.08) 2 Dimensions in [mm], () = Inch Tolerances: ±0.5 (±0.02) 14 1 Pin pich tolerances: ±0.25 (±0.01) Speciﬁcations can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. April 17. 2018 www.tracopower.com Page 4 of 4 0-15° 1.8 2.54 10.16 2.54 (0.07) (0.1) (0.4) (0.1) 1.3 (0.05) 0.8 (0.03) 0.25 (0.01) 1.8 2.54 10.16 2.54 1.0 (0.04) (0.07) (0.1) (0.4) (0.1) 1.5 (0.06) top view top view 18.9 (0.74) 18.9(0.74) 1.8 (0.07) 1.82.54 10.16 2.54 (0.07) (0.1) (0.4) (0.1)

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products