TRACO POWER DC/DC Converters TEL15 Series 15 Watt DC/DC Converters TEL 15 Series, 15 Watt Measures: 2.00 x 1.00 x 0.40” CB Scheme UL 60950-1 Features ◆ High efficiency up to 86 % ◆ Operating temperature range –40°C to +80°C ◆ Indefinite short-circuit protection ◆ I/O isolation 1500 VDC ◆ Industry standard pinout ◆ Cost optimized design ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TEL 15 series is a range of DC/DC-converter modules with wide input range of 2:1. State of the art SMD-technology guarantees a product with very high reliability and good cost /performance ratio. High efficiency allows an operating temperature range of –40°C to +80°C at full load. This product serie provides an economical solution for many cost critical applications in industrial and consumer electronics. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEL 15-1210 3.3 VDC 3‘000 mA 78 % 5.1 VDC 3‘000 mA 81 % TEL 15-1211 TEL 15-1212 9 – 18 VDC 12 VDC 1’250 mA 86 % (nominal 12 VDC) TEL 15-1213 15 VDC 1’000 mA 86 % TEL 15-1222 ±12 VDC ±625 mA 86 % TEL 15-1223 ±15 VDC ±500 mA 86 % TEL 15-2410 3.3 VDC 3‘000 mA 78 % TEL 15-2411 5.1 VDC 3‘000 mA 81 % TEL 15-2412 18 – 36 VDC 12 VDC 1’250 mA 86 % (nominal 24 VDC) TEL 15-2413 15 VDC 1’000 mA 86 % TEL 15-2422 ±12 VDC ±625 mA 86 % TEL 15-2423 ±15 VDC ±500 mA 86 % TEL 15-4810 3.3 VDC 3‘000 mA 78 % TEL 15-4811 5.1 VDC 3‘000 mA 81 % TEL 15-4812 36 – 75 VDC 12 VDC 1’250 mA 86 % (nominal 48 VDC) TEL 15-4813 15 VDC 1’000 mA 86 % TEL 15-4822 ±12 VDC ±625 mA 86 % TEL 15-4823 ±15 VDC ±500 mA 86 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEL-5-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEL15 Series 15 Watt DC/DC Converters DC/DC Converters Measures: 2.00 x 1.00 x 0.40” TEL 15 Series 15 Watt Input Specifications Input current no load 12 Vin models: 30 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Input current (full load) 12 Vin; 3.3 Vout models: 1050 mA typ. 12 Vin; other output models: 1500 mA typ. 24 Vin; 3.3 Vout models: 550 mA typ. 24 Vin; other output models: 750 mA typ. 48 Vin; 3.3 Vout models: 250 mA typ. 48 Vin; other output models: 350 mA typ. Start-up voltage / under voltage shut down 12 Vin models: 8.5 VDC / 8.0 VDC typ. 24 Vin models: 17 VDC / 15 VDC typ. 48 Vin models: 33 VDC / 29 VDC typ. Surge voltage 12 Vin models: 25 V max. (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 1 % max. – Load variation 10 – 100 % single output models: 0.5 % max. dual output models balanced load: 1 % max. dual output models unbalanced load: 3 % max. / Minimum load 10 % Ripple and noise (20 MHz Bandwidth) single output models: 50 mVpk-pk max. dual output models: 75 mVpk-pk max Temperature coefficient ±0.02 %/K Output current limitation >120 % of Iout max., foldback Short circuit protection indefinite (automatic recovery) Capacitive load single output models: 470 µF max. dual output models: 220 µF max. (per output) General Specifications Temperature ranges – Operating –40°C to +80°C (without load derating) – Case temperature +100°C max. – Storage –55°C to +125°C Power derating – Natural convection 2.5 %/K above +60°C – Natural convection with heat sink (optional) 1.0 %/K above +70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >700’000 h Isolation voltage (60 sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 1200 pF typ. Isolation resistance – Input/Output (500 VDC) >1000 M Ohm Switching frequency (fixed) 330 kHz typ. (Pulse width modulation PWM) Safety standards UL/cUL 60950-1, IEC/EN 60950-1 (Compliance up to 60 VDC input voltage (SELV limit) Safety approval CSA 60950-1-03 (File no. 226037) www.tracopower.com/products/tel15-csa.pdf Environmental compliance – Reach www.tracopower.com/overview/tel15 – RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 2 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEL-5-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEL15 Series 15 Watt DC/DC Converters DC/DC Converters Measures: 2.00 x 1.00 x 0.40” TEL 15 Series 15 Watt Physical Specifications Casing material copper nickel plated Baseplate non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 32 g (1.13oz) Soldering temperature max. 265°C / 10 sec. Outline Dimensions 50.8  (2.0)  1 5.2 20.32 Pin-Out (0.6) (0.8) Pin Single Dual 3 1 +Vin (Vcc) +Vin (Vcc) Bottom View 2 –Vin (GND) –Vin (GND) 1 4 3 +Vout +Vout 2 4 No pin Common 5 5 –Vout –Vout Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitch tolerances: ±0.13 (±0.005) Case tolerances: ±0.25 (±0.01) Insulated baseplate Heat-Sink (Option) Heat-sink TEN-HS4 (optional) Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Heat-sink Thermal pad Material: Aluminum Clamp Converter Finish: Anodic treatment (black) Weight: 9 g (0.31oz) without converter 23.0 (0.91) Thermal impedance after assembling: 10 K/W 18.0 (0.71) max. Note: Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. March 16. 2015 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEL-5-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 10.2 5.08 (0.4) (0.2) 31.0 (1.22) max. 2.5 10.16 10.16 (0.1) (0.4) (0.4) 20.32 (0.8) 6.0 10.2 25.4 (0.24) (0.40) (1.0)