TRACO POWER DC/DC Converters TEL30 Series 30 Watt DC/DC Converters TEL 30 Series, 30 Watt Measures: 2.00 x 1.00 x 0.40” CB Scheme Features UL 60950-1 ◆ Highest power density: 30W in 51x25x9.6mm package ◆ Industry standard footprint ◆ Very high ffficiency ◆ Models with low output Voltages: 2.5 & 3.3VDC ◆ Output voltage adjustable ◆ Optional remote On/Off ◆ Under voltage lockout ◆ Operating temperature range –40°C to +71°C ◆ Six-side shielded metal case ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TEL 30 Series is a new range of cost efficient, isolated 30W converters in a shielded metal case with excellent specification. The 10 models in this series feature 2:1 input range with 18-36 or 36-75 VDC. Overload and over voltage protection, under voltage shutdown as well as remote On/Off are features of this converter. Typical applications for the TEL 30 Series converter are communication and net- working systems, industrial electronics and distributed power architectures. Models Ordercode Input voltage range Output voltage Output current max. Efficiency TEL 30-2409 2.5 VDC 6‘000 mA 84 % TEL 30-2410 3.3 VDC 6’000 mA 86 % 18 – 36 VDC TEL 30-2411 5.1 VDC 5’000 mA 88 % (nominal 24 VDC) TEL 30-2412 12 VDC 2’500 mA 88 % TEL 30-2413 15 VDC 2’000 mA 88 % TEL 30-4809 2.5 VDC 6‘000 mA 84 % TEL 30-4810 3.3 VDC 6’000 mA 86 % 36 – 75 VDC TEL 30-4811 5.1 VDC 5’000 mA 88 % (nominal 48 VDC) TEL 30-4812 12 VDC 2’500 mA 88 % TEL 30-4813 15 VDC 2’000 mA 88 % Click below for more details, to buy on-line or request volume pricing: http://power.sager.com/traco-power-TEL-30-dc-dc-converter.html Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 1 of 3 (866) 588-1750 power@sager .com h t t p: / / pow e r. sa ge r. c om TRACO POWER TEL30 Series 30 Watt DC/DC Converters DC/DC Converters Measures: 2.00 x 1.00 x 0.40” TEL 30 Series 30 Watt Input Specifications Input current at no load 24 Vin models: 70 mA typ. 48 Vin models: 50 mA typ. Start-up voltage / 24 Vin models: 17.8 VDC / 15.8 VDC under voltage shut down 48 Vin models: 36 VDC / 33 VDC Surge voltage 24 Vin models: 50 V max. (100 msec. max.) 48 Vin models: 100 V max. Output Specifications Voltage set accuracy ±1.0 % max. Output voltage adjustment ±10 % Regulation – Input variation Vin min. to Vin max. 0.3 % max. – Load variation 10 – 100 % 1.0 % max. Ripple and noise (20 MHz Bandwidth) 100 mVpk-pk max. Temperature coefficient ±0.02 %/K Output current limitation 110 % – 140 % Iout max., foldback Short circuit protection hiccup mode, indefinite (automatic recovery) Capacitive load 2.5 / 3.3 / 5.1 VDC models: 6800 µF max. 12 / 15 VDC models: 680 µF max. General Specifications Temperature ranges – Operating –40°C to +71°C (with derating) – Case temperature +105°C max. – Storage –50°C to +125°C Derating 2 %/K above 50°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >600’000 h Isolation voltage (60 sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 1200 pF typ. Isolation resistance – Input/Output >1000 Mohm Remote On/Off – On: 2.5 to 100 VDC or open circuit. (optional) – Off: –1.0 to +1.0 VDC or short circuit pin 3 and pin 2 – Off idle current: 5 mA max. Switching frequency (fixed) 350 kHz typ. (pulse width modulation PWM) Safety standards UL/cUL 60950-1, IEC/EN 60950-1 Safety approvals – CSA certificate (UL/cUL 60950-1, 1nd edition) www.tracopower.com/products/tel30-csa.pdf – CB test certificate (IEC/EN 60950-1) www.tracopower.com/products/tel30-cb.pdf Physical Specifications Casing material aluminum Potting material epoxy (UL 94V-0 rated) Weight 32 g (1.13 oz) Soldering temperature max. 265°C / 10 sec. Environmental compliance – Reach www.tracopower.com/products/tel30-reach.pdf – RoHS directive 2011/65/EU Click below for more details, to buy on-line or request volume pricing: http://power.sager.com/traco-power-TEL-30-dc-dc-converter.html Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. (866) 588-1750 power@sager .com http://www.tracopower.com Page 2 of 3 h t t p: / / pow e r. sa ge r. c om TRACO POWER TEL30 Series 30 Watt DC/DC Converters DC/DC Converters Measures: 2.00 x 1.00 x 0.40” TEL 30 Series 30 Watt Output Voltage Adjustment Trim up Trim down Trim up/down +Vout +Vout Trim CW Ru Rd 10K Trim Pot. - Vout Trim CCW –Vout (33 x Vout) – ( 30 x Vadj) (36.667 x Vadj) – (33 x Vout) Ru [kOhm] = Rd [kOhm]= Vadj – Vout Vout – Vadj Outline Dimensions 50.8 (2.0) Pin-Out Pin 4 1 1 +Vin (Vcc) 2 2 –Vin (GND) Bottom View 5 3 Remote On/Off 3 (optional) 6 4 +Vout 45.72 (1.8) 2.54 (0.1) 5 –Vout 6 Trim Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.039 ±0.002) Pin pitch tolerance: ±0.13 (±0.005) Case tolerances: ±0.25 (±0.01) Heat-Sink (Option) Heat-sink TEN-HS4 (optional) Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Heat-sink Material: Aluminum Thermal pad Clamp Finish: Anodic treatment (black) Converter Weight: 9 g (0.31oz) without converter 31.1 (1.22) Thermal impedance after assembling: 10 K/W 17.2 (0.68) max. Note: Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Click below for more details, to buy on-line or request volume pricing: http://power.sager Specificati .com/traco-power ons can be changed wi -TEL thout noti -30-dc-dc-converter ce! Make sure you are using the latest documentation, downloadable at www.tracopower. .html com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Rev. February 21. 2014 www.tracopower.com Page 3 of 3 (866) 588-1750 power@sager .com h t t p: / / pow e r. sa ge r. c om (0.7) 17.78 7.62 (0.3) 2.54 (0.1) 31.0 (1.22) max. 10.16 (0.4) 5.08 10.2 20.32 2.54 (0.8) (0.1) (0.2) (0.4) 25.4 (1.0)