DC/DC Converters TRACO POWER TEN15-WI Series TEN 15WI Series, 15 Watt 20 Watt DC/DC Converters Measures: 2.00 x 1.00 x 0.40” Features UL 60950-1 ◆ Ultra-wide 4:1 input range ◆ High efficiency up to 86 % ◆ Extended operating temperature range –40°C to +85°C max. ◆ Indefinite short circuit protection ◆ I/O isolation 1500 VDC ◆ Built-in filter meets EN 55022, Class A and FCC, Level A without external components ◆ Remote On/Off ◆ Industry standard pinout ◆ Six-side shielded case ◆ Lead free design, fully RoHS compliant ◆ 3–year product warranty The TEN 15WI series of DC/DC converters, comprising 10 different models, has been designed for a wide range of applications including communications, industri- al systems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of –40°C to +85°C. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 15-2410WI 3,3 VDC 3’000 mA 78 % TEN 15-2411WI 5,1 VDC 2‘950 mA 82 % 9 – 36 VDC TEN 15-2412WI 12 VDC 1’250 mA 85 % (24 VDC nominal) TEN 15-2422WI ±12 VDC ±625 mA 85 % TEN 15-2423WI ±15 VDC ±500 mA 86 % TEN 15-4810WI 3,3 VDC 3’000 mA 78 % TEN 15-4811WI 5,1 VDC 2‘950 mA 82 % 18 – 75 VDC TEN 15-4812WI 12 VDC 1’250 mA 85 % (48 VDC nominal) TEN 15-4822WI ±12 VDC ±625 mA 85 % TEN 15-4823WI ±15 VDC ±500 mA 86 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 1 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-15-wi-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om not recommended for new design in TRACO POWER TEN15-WI Series DC/DC Converters 20 Watt DC/DC Converters TEN 15WI 15 Watt Measures: 2.00 x 1.00 x 0.40” Input Specifications Input current at no load 24 Vin models: 25 mA typ. 48 Vin models: 15 mA typ. Input current at full load 24 Vin; 3.3 Vout models: 528 mA typ. 24 Vin; other output models: 740 mA typ. 48 Vin; 3.3 Vout models: 264 mA typ. 48 Vin; other output models: 370 mA typ. Surge voltage 24 Vin models: 50 V max. (100 msec. max.) 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 10 – 100 % 1 % max. Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max. Temperature coefficient ±0.02 %/K Output current limitation >110 % of Iout max., foldback Short circuit protection indefinite (automatic recovery) Capacitive load single output models: 470 µF max. dual output models: 220 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C (–40F to +185°F) – Case temperature +100°C max. – Storage –55°C to +125°C (–67°F to +257°F) Load derating – without heatsink 2.5 %/K above 60°C – with heatsink 3.3 %/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >700’000 h Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacitance – Input/Output 1200 pF typ Isolation resistance – Input/Output (500 VDC) >1’000 MOhm Switching frequency (fixed) 330 kHz typ. (pulse width modulation) Remote On/Off: – On: 2.5 ... 5.5 VDC or open circuit. – Off: -0.7 ... 0.8 VDC or short circuit pin 2 and pin 6 – Off idle current: 10 mA max. Safety standards cUL/UL 60950-1, IEC/EN 60950-1 Safety approvals CSA File No. 226037 http://directories.csa-international.org Environmental compliance – Reach www.tracopower.com/products/ten15wi-reach.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material copper, nickel plated Baseplate material non conductive FR4 Potting material Silicon TSE-3331A/B (flammability to UL 94V-0) Weight 32 g (1.09oz) Soldering temperature max. 265°C / 10 sec. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 2 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-15-wi-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN15-WI Series DC/DC Converters 20 Watt DC/DC Converters TEN 15WI 15 Watt Measures: 2.00 x 1.00 x 0.40” Outline Dimensions 50.8 ±0.5 (2.0 ±0.02) Pin-Out 3 Pin Single Dual Bottom View 1 +Vin (Vcc) +Vin (Vcc) 1 4 2 2 –Vin (GND) –Vin (GND) 6 5 3 +Vout +Vout 4 No pin Common 20.32 15.2 ±0.5 5 –Vout –Vout (0.80) (0.60 ±0.02) 6 Remote On/Off Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.039 ±0.002) Pin pitsch tolerances: ±0.25 (±0.01) Insulated baseplate Casing tolerances: ±0.5 (±0.02) Application note: www.tracopower.com/products/ten15wi-application.pdf Heat-Sink (Option) Heat-sink TEN-HS4 (optional) Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Heat-sink Material: Aluminum Thermal pad Clamp Finish: Anodic treatment (black) Converter Weight: 9 g (0.31oz) without converter Thermal impedance after assembling: 10 K/W 31.1 (1.22) 18.0 (0.71) Note: max. Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. February 7. 2014 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-15-wi-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 5.08 (0.20) 2.5 ±0.5 7.62 7.62 (0.10 ±0.02) (0.30) (0.30) 31.0 (1.22) max. 10.2 ±0.5 10.16 10.16 (0.40 ±0.02) (0.40) (0.40) 6.0 ±0.5 25.4 ±0.5 (0.24 ±0.02) (1.00 ±0.02)