TRACO POWER DC/DC Converters TEN15 Series TEN 15 Series, 15 Watt 15 Watt DC/DC Converters Measures: 2.00 x 1.00 x 0.40” Features ◆ Wide 2:1 input range ◆ High efficiency up to 88% ◆ Extended operating temperature range –40°C to +85°C ◆ Indefinite short circuit protection ◆ I/O isolation 1500 VDC ◆ Input filter to meet EN 55022, Class A and FCC, level A without external components ◆ Industry standard footprint ◆ Shielded metal case with insulated baseplate ◆ 3-year product warranty The TEN 15 series is a family of high performance 15W DC/DC converters in a compact 2” x 1” low profile package with industry standard footprint. A high effici- ency allows a wide operating temperature range of –40°C to +85°C. A built-in EMI filter is built in to meet EN 55022, class A without any external components. Further standard features include over voltage protection and short-circuit protec- tion. Typical applications for these converters are battery operated equipment, in- strumentation, distributed power architectures in communication and industrial elec- tronics, everywhere where isolated, tightly regulated voltages are required. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 15-1210 3.3 VDC 4’000 mA 79 % TEN 15-1211 5 VDC 3‘000 mA 82 % TEN 15-1212 12 VDC 1’250 mA 86 % 9 – 18 VDC TEN 15-1213 15 VDC 1‘000 mA 86 % (12 VDC nominal) TEN 15-1221 ±5 VDC ±1500 mA 83 % TEN 15-1222 ±12 VDC ±625 mA 86 % TEN 15-1223 ±15 VDC ±500 mA 84 % TEN 15-2410 3.3 VDC 4’000 mA 80 % TEN 15-2411 5 VDC 3‘000 mA 84 % TEN 15-2412 12 VDC 1‘250 mA 85 % 18 – 36 VDC TEN 15-2413 15 VDC 1‘000 mA 85 % (24 VDC nominal) TEN 15-2421 ±5 VDC ±1’500 mA 84 % TEN 15-2422 ±12 VDC ±625 mA 86 % TEN 15-2423 ±15 VDC ±500 mA 86 % TEN 15-4810 3.3 VDC 4‘000 mA 81 % TEN 15-4811 5 VDC 3‘000 mA 83 % TEN 15-4812 12 VDC 1‘250 mA 87 % 36 – 75 VDC TEN 15-4813 15 VDC 1‘000 mA 86 % (48 VDC nomial) TEN 15-4821 ±5 VDC ±1‘500 mA 85 % TEN 15-4822 ±12 VDC ±625 mA 88 % TEN 15-4823 ±15 VDC ±500 mA 87 % Page 1 of 4 http://www.tracopower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-15-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om not recommended for new design in TRACO POWER TEN15 Series 15 Watt DC/DC Converters DC/DC Converters TEN 15 Series Measures: 2.00 x 1.00 x 0.40” 15 Watt Input Specifications Input current at no load 12 Vin models: 30 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 15 mA typ. Input current at full load 12 Vin; 3.3 VDC models: 1470 mA typ. 12 Vin; other models: 1550 mA typ. 24 Vin; 3.3 VDC models: 730 mA typ. 24 Vin; other models: 780 mA typ. 48 Vin; 3.3 VDC models: 360 mA typ. 48 Vin; other models: 380 mA typ. Surge voltage 12 Vin models: 36 V max. (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 2 % – 100 % single output models: 0.5 % max. dual output models: 1 % max. (balanced load) 5 % max. (load cross variation 25 % / 100 %) Minimum load 2 % of rated max. output current. (Operation at lower load is safe but major deviations to specifyed data may occur) Ripple and noise (20 MHz Bandwidth) single output models: 50 mVpk-pk max. dual output models: 75 mVpk-pk max. Temperature coefficient ±0.02 %/K Start up time (nominal Vin and constant resistive load) 20 ms typ. Transient response (25 % load step change) 250 µs typ. Short circuit protection continiuous (automatic recovery) Over load protection 150 % of Iout max typ. foldback Over voltage protection 3.3 VDC models: 3.9 V 5.0 VDC models: 6.2 V 12 VDC models: 15 V 15 VDC models: 18 V Capacitive load 3.3 VDC models: 10‘200 µF max. 5 VDC models: 7‘050 µF max. 12 VDC models: 1‘035 µF max. 15 VDC models: 750 µF max. ±5 VDC models: ±1‘020 µF max. ±12 VDC models: ±495 µF max. ±15 VDC models: ±165 µF max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 http://www.tracopower.com Page 2 of 4 power@sager .com http://power.sager.com/traco-power-ten-15-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN15 Series 15 Watt DC/DC Converters DC/DC Converters Measures: 2.00 x 1.00 x 0.40” TEN 15 Series 15 Watt General Specifications Temperature ranges – Operating – 40°C to +85°C – Casing temperature +100°C max. – Storage –55°C to +105°C Derating 3.3 / 5.0 VDC models: 2.5 %/K above 60°C other models: 3.3 %/K above 70°C Thermal impedance – Natural convection 12°C/W – Natural convection with heatsink 10°C/W Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >2.3 Mio h Isolation (Input/Output) – Voltage 1‘500 VDC – Capacitance 300 pF max. – Resistance >1‘000 M Ohm Switching frequency single output models: 500 kHz typ. (pulse width modulation) dual output models: 300 kHz typ. (pulse width modulation) EMC immunity – Electrostatic discharge ESD EN 61000-4-2 8 kV / 6 kV, criteria B – RF field susceptibility EN 61000-4-3 10 V/m, criteria A – Electrical fast transient / burst immunity input EN 61000-4-4 ±2 kV, criteria B – Surge immunity EN 61000-4-5 ±1 kV, criteria B – Immunity to conducted RF disturbances EN 61000-4-6 10 Vrms, criteria A Vibration acc. MIL-STD-810F Thermal shock acc. MIL-STD-810F Safety standards UL 60950-1, EN 60950-1, IEC 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 Environmental compliance – Reach www.tracopower.com/overview/ten15 – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material copper, nickel plated Baseplate material non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 27 g (09.5oz) Soldering temperature max. +265°C / 10 sec. Application note : www.tracopower.com/products/ten15-application.pdf Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager http://.com/traco-power www.tracopower.com-ten-15-dc-dc-converter.html Page 3 of 4 h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN15 Series 15 Watt DC/DC Converters DC/DC Converters Measures: 2.00 x 1.00 x 0.40” TEN 15 Series 15 Watt Outline Dimensions 50.8 (2.0) 15.2 20.32 Pin-Out (0.6) (0.8) Pin Single Dual 3 1 +Vin (Vcc) +Vin (Vcc) Bottom View 2 –Vin (GND) –Vin (GND) 1 4 3 +Vout +Vout 2 4 No pin Common 5 5 –Vout –Vout Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitch tolerances: ±0.25 (±0.01) Casing tolerances: ±0.5 (±0.02) Insulated baseplate Heat-Sink (Option) Order code: TEN-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 17g (0.60oz) without converter Thermal impedance after assembling: 10 K/W 56.0 (2.2) max. Heat-sink Note: Thermal pad The product label on converter has to be re- Clamp Converter moved before mounting the heat-sink. For volume orders converters will be supplied with heat-sinks already mounted. Please con- 16.8 (0.66) tact factory for quotation. max. Separate heat-sinks are only available for prototypes and small quantity orders. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work pr Rev. March 3 operly and r 1.2015 eliably. www.tracopower.com Page 4 of 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-15-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 5.08 (0.2) 10.2 (0.4) 10.16 10.16 2.5 (0.1) (0.4) (0.4) 10.2 5.6 25.4 (1.0) (0.22) (0.4) 14.5 (0.57)