DC/DC Converters TRACO POWER TEN20 TEN 20 Series, 20 Watt 20 Watt DC/DC Converters Measures: 2.00 x 1.00 x 0.40” Features UL 60950-1 ◆ Wide 2:1 input range ◆ High efficiency up to 89 % ◆ Extended operating temperature range –40°C to +85°C ◆ Indefinite short circuit protection ◆ I/O isolation 1500VDC ◆ Remote On/Off ◆ Input filter meets EN 55022, Class A and FCC, level A without external components ◆ Industry standard pinout ◆ Shielded metal case with insulated baseplate ◆ 3-year product warranty The TEN 20 series of DC/DC converters, comprising 18 different models, has been designed for a wide range of applications including communications, industrial sy- stems and battery powered equipments. Full SMD-design with use of ceramic chip capacitors guarantees a high reliability and a long lifetime. Other features of this converters are internal filter to meet EN 55022, class A and FCC, level A and an extended temperature range of –40°C to +85°C. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 20-1210 3,3 VDC 4’000 mA 81 % TEN 20-1211 5 VDC 4‘000 mA 84 % TEN 20-1212 12 VDC 1’670 mA 88 % 9 – 18 VDC TEN 20-1213 15 VDC 1‘340 mA 88 % (12 VDC nominal) TEN 20-1222 ±12 VDC ±835 mA 88 % TEN 20-1223 ±15 VDC ±670 mA 88 % TEN 20-2410 3,3 VDC 4’000 mA 82 % TEN 20-2411 5 VDC 4‘000 mA 85 % TEN 20-2412 18 – 36 VDC 12 VDC 1‘670 mA 89 % TEN 20-2413 (24 VDC nominal) 15 VDC 1‘340 mA 89 % TEN 20-2422 ±12 VDC ±835 mA 89 % TEN 20-2423 ±15 VDC ±670 mA 89 % TEN 20-4810 3,3 VDC 4‘000 mA 82 % TEN 20-4811 5 VDC 4‘000 mA 85 % TEN 20-4812 36 – 75 VDC 12 VDC 1‘670 mA 89 % TEN 20-4813 (48 VDC nominal) 15 VDC 1‘340 mA 89 % TEN 20-4822 ±12 VDC ±835 mA 89 % TEN 20-4823 ±15 VDC ±670 mA 89 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-20-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER DC/DC ConverteTEN20 rs 20 Watt DC/DC Converters TEN 20 Series 20 Watt Measures: 2.00 x 1.00 x 0.40” Input Specifications Input current no load 12 Vin models: 30 mA typ. 24 Vin models: 17 mA typ. 48 Vin models: 10 mA typ. Surge voltage 12 Vin models: 25 V max. (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 Class A, FCC part 15, level A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.3 % max. – Load variation 10 – 100 % 0.5 % max. 1.0 % max. for 3.3 VDC output models Ripple and noise (20 MHz Bandwidth) 80 mVpk-pk max. Temperature coefficient ±0.02 %/K Output current limitation 110–160 % of Iout max., constand current Short circuit protection indefinite (automatic recovery) Minimum load 10 % of rated max. current (operation at lower load condition is safe but output ripple will increase) Capacitive load 3.3 / 5 VDC models: 6‘800 µF max. 12 / 15 VDC models: 680 µF max. ±12 / ±15 VDC models: 270 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –55°C to +125°C Load derating – without heatsink 2.3 %/K above 60°C – with heatsink 2.9 %/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio h Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacitance – Input/Output 1‘200 pF typ. Isolation resistance – Input/Output (500 VDC) >1’000 MOhm Switching frequency (fixed) 330 kHz typ. (pulse width modulation PWM) Remote On/Off: – On: 2.5 ... 100 VDC or open circuit. – Off: –1 ... 1.0 VDC or short circuit pin 2 and pin 6 – Off standby input current: 5 mA max. – Control common: referenced to negativ input – Start-up delay: 15 ms Safety standards UL 60950-1, IEC/EN 60950-1 Compliance up to 60 VDC input voltage (SELV limit) Safety approvals CSA File No. 226037 http://directories.csa-international.org All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 2 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-20-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN20 DC/DC Converters 20 Watt DC/DC Converters TEN 20 Series 20 Watt Measures: 2.00 x 1.00 x 0.40” Physical Specifications Casing material copper, nickel plated Baseplate material non conductive FR4 Potting material silicon rubber TSE (UL 94V-0 rated) Weight 30 g (1.05 oz) Soldering temperature max. 260°C / 10 sec. Environmental compliance – Reach www.tracopower.com/products/ten20-reach.pdf – RoHS RoHS directive 2011/65/EU Application note: www.tracopower.com/products/ten20-application.pdf Outline Dimensions 50.8 ±0.5 Pin-Out (2.0 ±0.02) Pin Single Dual 3 1 +Vin (Vcc) +Vin (Vcc) Bottom View 1 2 –Vin (GND) –Vin (GND) 4 2 3 +Vout +Vout 6 5 4 No pin Common 5 –Vout –Vout 20.32 15.2 ±0.5 6 Remote On/Off (0.80) (0.60 ±0.02) Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitsch tolerances: ±0.25 (±0.01) Case tolerances: ±0.5 (±0.02) Insulated baseplate Heat-Sink (Option) Heat-sink TEN-HS4 (optional) Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Heat-sink Material: Aluminum Thermal pad Clamp Finish: Anodic treatment (black) Converter Weight: 9 g (0.31oz) without converter Thermal impedance after assembling: 10 K/W 31.1 (1.22) 18.0 (0.71) Note: max. Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. June 27. 2014 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-20-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 5.08 (0.20) 2.5 ±0.5 7.62 7.62 (0.10 ±0.02) (0.30) (0.30) 31.0 (1.22) max. 10.2 ±0.5 10.16 10.16 (0.40 ±0.02) (0.40) (0.40) 6.0 ±0.5 25.4 ±0.5 (0.24 ±0.02) (1.00 ±0.02)