DC/DC Converters TRACO POWER TEN20-WIN SERIES TEN 20WIN Series, 20 Watt 20 Watt DC/DC Converters Measures: 2.00 x 1.00 x 0.40” UL 60950-1 Features ◆ High power density in 1” x 2” metal package ◆ Ultra wide 4 : 1 input range ◆ Extended operating temperature range –40°C to +85°C max. ◆ No minimum load required ◆ I/O isolation 1500 VDC ◆ Remote On/Off ◆ Adjustable output voltage ◆ Industry standard footprint ◆ Shielded metal case with insulated baseplate ◆ Optional heatsink ◆ Lead free design - RoHS compliant The TEN 20WIN series is a family of high performance 20W DC/DC converter ◆ 3-year product warranty modules featuring ultra wide 4:1 input voltage ranges in a ultra compact 2“ x 1“ low profile package with industry-standard footprint. A very high efficiency al- lows an operating temperature range of –40°C to 85°C. Further standard features include remote On/Off, output voltage trimming, over voltage protection and short- circuit protection. Typical applications for these converters are battery operated equipment and dis- tributed power architectures in communication and industrial electronics, every- where where isolated, tightly regulated voltages are required. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 20-2410WIN 3.3 VDC 5‘500 mA 85 % TEN 20-2411WIN 5 VDC 4‘000 mA 88 % TEN 20-2412WIN 12 VDC 1‘670 mA 86 % 9 – 36 VDC TEN 20-2413WIN 15 VDC 1‘330 mA 86 % (24 VDC nominal) TEN 20-2421WIN ±5 VDC ±2‘000 mA 88 % TEN 20-2422WIN ±12 VDC ±835 mA 87 % TEN 20-2423WIN ±15 VDC ±665 mA 87 % TEN 20-4810WIN 3.3 VDC 5‘500 mA 85 % TEN 20-4811WIN 5 VDC 4‘000 mA 88 % TEN 20-4812WIN 12 VDC 1‘670 mA 87 % 18 – 75 VDC TEN 20-4813WIN 15 VDC 1‘330 mA 87 % (48 VDC nominal) TEN 20-4821WIN ±5 VDC ±2‘000 mA 89 % TEN 20-4822WIN ±12 VDC ±835 mA 88 % TEN 20-4823WIN ±15 VDC ±665 mA 88 % http://www.tracopower.com Page 1 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-20-win-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN20-WIN SERIES DC/DC Converters 20 Watt DC/DC Converters TEN 20WIN 20 Watt Measures: 2.00 x 1.00 x 0.40” Input Specifications Input current at no load 24 Vin models: 50 mA typ. 48 Vin models: 35 mA typ. Input current at full load 24 Vin models: 1000 mA typ. 48 Vin models: 500 mA typ. Surge voltage 24 Vin models: 50 V max. (100 msec. max.) 48 Vin models: 100 V max. Input voltage variation (dv/dt) 5 V / ms, max. (complies to ETS 300 132 part. 4.4) Start-up voltage / under voltage lockout 24 Vin models: 9 VDC / 7.5 VDC typ. 48 Vin models: 18 VDC / 15 VDC typ. Conducted noise (input) EN 55022 level A, FCC part 15, level A with external capacitor (see application note) ESD (input) EN 61000-4-2, perf. criteria B Fast transient (input) EN 61000-4-4, perf. criteria B Surge (input) EN 61000-4-5, perf. criteria A Output Specifications Voltage set accuracy ±1 % Output voltage adjustment (single output models only) ±10 % by external resistor, see application note: Regulation – Input variation Vin min. to Vin max. 0.2 % max. – Load variation 0 – 100%: single output models: 0.5 % max. dual output models: 1 % max. (balanced load) – Load cross variation 25 % / 100 % 5 % max. Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) single output models: 75 mVpk-pk max. dual output models: 100 mVpk-pk max. Start up time (nominal Vin and constant resistive load) 20 ms typ. Transient Response (25% load step change) 250 µs typ. Short circuit protection indefinite (automatic recovery) Over load protection 150 % of Iout max typ. Over voltage protection 3.3 Vout models: 3.9 V 5 /±5 Vout models: 6.2 / ±6.2 V 12 /±12 Vout models: 15 / ±15 V 15 /±15 Vout models: 18 / ±18 V Capacitive load 3.3 Vout models: 18’000 µF max. 5 Vout models / ±5 Vout models: 9’600 µF max. / ±4’800 µF max. 12 Vout models / ±12 Vout models: 1’600 µF max. / ±800 µF max. 15 Vout models / ±15 Vout models: 1’000 µF max. / ±500 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C (see power derating) – Case temperature +105°C max. – Storage –55°C to +125°C Humidity (non condensing) 95 % rel H max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 2 of 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-20-win-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN20-WIN SERIES DC/DC Converters 20 Watt DC/DC Converters TEN 20WIN 20 Watt Measures: 2.00 x 1.00 x 0.40” General Specifications Reliability, calculated MTBF (MIL-HDBK-217F at +25°C, ground benign) >1.8 Mio. h Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacitance – Input/Output 1500 pF max Isolation resistance – Input/Output >1‘000 M Ohm Switching frequency (fixed) 400 kHz typ. (pulse width modulation PWM) Vibration 10–55Hz, 10G, 30 minutes along X, Y, Z Remote On/Off – On: 3.0 to 12 VDC or open circuit. – Off: 0 to 1.2 VDC or short circuit pin 2 and pin 6 – Off idle current: 2.5 mA typ. Safety standards UL 60950-1, EN/IEC 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material copper, nickel plated Baseplate material non conductive FR4 Potting material epoxy (UL 94V-0 - rated) Weight 27 g (0.95 oz) Soldering temperature max. 265°C / 10 sec. Application note: www.tracopower.com/products/ten20win-application.pdf Power Derating 100 80 60 Natural convection with heatsink Natural convection without heatsink 40 20 0 -40 -20 0 20 40 60 80 100 105 Ambient Temperature [°C] All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 3 of 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-20-win-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Output Power (%) TRACO POWER TEN20-WIN SERIES DC/DC Converters 20 Watt DC/DC Converters TEN 20WIN 20 Watt Measures: 2.00 x 1.00 x 0.40” Outline Dimensions 50.8 (2.0) Pin-Out Pin Single Dual 3 Bottom View 1 +Vin (Vcc) +Vin (Vcc) 1 4 2 –Vin (GND) –Vin (GND) 2 3 +Vout +Vout 6 5 4 Trim Common 20.32 15.2 –Vout –Vout 5 (0.80) (0.60) 6 Remote On/Off Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.039 ±0.002) Pin pitch tolerances: ±0.35 (±0.014) Case tolerances: ±0.5 (±0.02) Insulated baseplate Heat-Sink (Option) Order code: TEN-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 17 g (0.60oz) without converter Thermal impedance after assembling: 10 K/W 56.0 (2.2) max. Heat-sink Note: Thermal pad The product label on converter has to be re- Clamp Converter moved before mounting the heat-sink. For volume orders converters will be supplied with heat-sinks already mounted. Please con- 16.8 (0.66) tact factory for quotation. max. Separate heat-sinks are only available for prototypes and small quantity orders. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 25. 2014 www.tracopower.com Page 4 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-ten-20-win-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 5.08 (0.20) 2.5 7.62 7.62 (0.10) (0.30) (0.30) 10.2 10.16 10.16 (0.40) (0.40) (0.40) 6.0 25.4 (0.24) (1.00) 14.5 (0.57)