TRACO POWER DC/DC Converters TEN30 SERIES 30 Watt Wide 2:1 Input Range DC-DC Converter TEN 30 Series, 30 Watt Measures: 2.00 x 1.00 x 0.40” CB Scheme Features UL 60950-1UL 60950-1 ◆ Smallest encapsulated 30 W converter ◆ 2’’ x 1’’ x 0.4’’ shielded metal package with isolated baseplate ◆ Single- and dual output models ◆ I/O isolation voltage 1500 VDC ◆ Excellent efficiency up to 91 % ◆ Operating temp. range –40°C to +85°C ◆ Remote On/Off The TEN-30 series is the latest generation of high performance dc-dc converter ◆ Over-temperature protection modules setting a new standard concerning power density. This product with 30W comes in an encapsulated, shielded metal package with a footprint of only ◆ 3-year product warranty 1.0” x 2.0”. All models have wide 2:1 input voltage range and precisely regulated, isolated output voltages. Advanced circuit topology provides high efficiency up to 91% which allows an industrial operating temperature range of –40°C to +85°C (with derating). Further features include remote On/Off, trimmable output, under-voltage lockout and overtemperature protection. Typical applications for these converters are mo- bile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Ordercode Input voltage Output voltage Output current max. Efficiency typ. TEN 30-1207 1.5 VDC 8‘500 mA 79 % TEN 30-1209 2.5 VDC 8‘000 mA 84 % TEN 30-1210 3.3 VDC 8‘000 mA 85 % TEN 30-1211 5.1 VDC 6‘000 mA 87 % 9 – 18 VDC TEN 30-1212 12 VDC 2‘500 mA 89 % (nominal 12 VDC) TEN 30-1213 15 VDC 2‘000 mA 89 % TEN 30-1221 ±5 VDC ±3‘000 mA 87 % TEN 30-1222 ±12 VDC ±1‘250 mA 87 % TEN 30-1223 ±15 VDC ±1‘000 mA 87 % TEN 30-2407 1.5 VDC 8‘500 mA 80 % TEN 30-2409 2.5 VDC 8‘000 mA 85 % TEN 30-2410 3.3 VDC 8’000 mA 87 % TEN 30-2411 5.1 VDC 6‘000 mA 90 % 18 – 36 VDC TEN 30-2412 12 VDC 2‘500 mA 91 % (nominal 24 VDC) TEN 30-2413 15 VDC 2‘000 mA 91 % TEN 30-2421 ±5 VDC ±3‘000 mA 90 % TEN 30-2422 ±12 VDC ±1‘250 mA 89 % TEN 30-2423 ±15 VDC ±1‘000 mA 90 % TEN 30-4807 1.5 VDC 8‘500 mA 80 % TEN 30-4809 2.5 VDC 8‘000 mA 85 % TEN 30-4810 3.3 VDC 7‘500 mA 87 % TEN 30-4811 5.1 VDC 6‘000 mA 89 % 36 – 75 VDC TEN 30-4812 12 VDC 2‘500 mA 91 % (nominal 48 VDC) TEN 30-4813 15 VDC 2‘000 mA 91 % TEN 30-4821 ±5 VDC ±3‘000 mA 90 % TEN 30-4822 ±12 VDC ±1‘250 mA 88 % TEN 30-4823 ±15 VDC ±1‘000 mA 89 % http://www.tracopower.com Page 1 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN30-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN30 SERIES DC/DC Converters 30 Watt Wide 2:1 Input Range DC-DC Converter TEN 30 Series, 30 Watt Measures: 2.00 x 1.00 x 0.40” Input Specifications Input current at no load 12 V; ±12 / ±15 Vout models: 50 mA max. 12 V; other models: 100 mA max. 24 V; 12 / 15 Vout models: 30 mA max. 24 V; ±12 / ±15 Vout models: 30 mA max. 24 V; other models: 70 mA max. 48 V; ±12 / ±15 Vout models: 30 mA max. 48 V; other models: 45 mA max. Input current at full load 12 V;.1.5 Vout models: 1400 mA typ. 12 V;.2.5 Vout models: 2100 mA typ. 12 V;.3.3 Vout models: 2700 mA typ. 12 V; other output models: 3000 mA typ. 24 V;.1.5 Vout models: 700 mA typ. 24 V;.2.5 Vout models: 1000 mA typ. 24 V;.3.3 Vout models: 1300 mA typ. 24 V; other output models: 1500 mA typ. 48 V;.1.5 Vout models: 350 mA typ. 48 V;.2.5 Vout models: 500 mA typ. 48 V;.3.3 Vout models: 650 mA typ. 48 V; other output models: 750 mA typ. Start-up voltage / 12 V models: 9 VDC / 8 VDC typ. under voltage shut down 24 V models: 18 VDC / 16 VDC typ. 48 V models: 36 VDC / 32 VDC typ. Surge voltage (100 msec. max.) 12 V models: 25 V max. 24 V models: 50 V max.. 48 V models: 100 V max. Conducted noise (input) EN 55022 class A with input capacitor 12 V models: 10 µF / 25 V 1812 MLCC 24 V models: 4.7 µF / 50 V 1812 MLCC 48 V models: 2.2 µF / 100 V 1812 MLCC Output Specifications Voltage set accuracy ±1 % Output voltage adj. range ±10 % (only for single output models) Regulation – Input variation Vin min. to Vin max. 0.2 % max. – Load variation 0 – 100 % – single output models 0.5 % max. – dual output models balanced load 1.0 % max. – dual output models unbalanced load (25% /100%) 5.0 % max. Minimum load not required Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz Bandwidth) 100 mVpk-pk max. (150 mVpk-pk for 12/±12/15/±15V models) Start up time (nominal Vin and constant resistive load) 30 ms typ. Transient response time (25% load change) 250 µs typ. Short circuit protection indefinite, automatic recovery Over load protection 150 % of Iout max. typ. Thermal shutdown at +115°C typ. Over voltage protection 1.5 VDC models: 2.0 V 2.5 VDC models: 3.3 V 3.3 VDC models: 3.9 V 5.1 VDC models: 6.2 V 12 VDC models: 15 V 15 VDC models: 18 V All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN30-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN30 SERIES DC/DC Converters 30 Watt Wide 2:1 Input Range DC-DC Converter TEN 30 Series, 30 Watt Measures: 2.00 x 1.00 x 0.40” General Specifications Capacitive load (max.) 1.5 / 2.5 / 3.3 Vout models: 20’000 µF 5.1 Vout models: 14’400 µF 12 Vout models: 3’000 µF 15 Vout models: 2’000 µF ±5 Vout models: ±3’000 µF ±12 Vout models: ±2’000 µF ±15 Vout models: ±1’300 µF Temperature ranges – Operating – 40°C to +85°C – Case temperature +100°C max. – Storage – 55°C to +125°C Load derating 3.3 %/K above +60°C Humidity (non condensing) 5 % to 95 % rel H max. Thermal inpedance – Natural convection 12 °C/W – Natural convection with heat sink 10 °C/W Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 1.4 Mio. h Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacitance – Input/Output 1500 pF max. Isolation resistance – Input/Output (500 VDC) >1’000 MOhm Remote On/Off: – On: 3 to 12 VDC or open circuit. – Off: 0 to 1.2 VDC or short circuit pin 3 and pin 2 – Standby current: 3 mA max. Switching frequency (fixed) 430 kHz typ. (puls width modulation) Vibration and thermal shock MIL-STD-810F Safety standards cUL/UL 60950-1, IEC/EN 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 – CB test report available for notified bodies on request Output Voltage Adjustment Trim up Trim down Trim +Vout Ru Nominal output voltage at open Trim input! Rd - Vout Trim Ru [kohm] Rd [kohm] output 1.5 2.5 3.3V 5.1V 12V 15V output 1.5 2.5 3.3V 5.1V 12V 15V +5% 0.56 4.3 6.8 5.1 43 47 –5% 0.68 6.2 8.2 6.2 56 56 +10% 0.051 0.33 0.75 0.75 4.3 1.8 –10% 0.062 0.75 0.62 0.82 5.6 2.2 Physical Specifications Casing material copper, nickel plated Baseplate non conductive FR4 Potting material epoxy (UL 94V-0 -rated) Weight 31 g (1.1 oz) Soldering temperature max. 265°C / 10 sec. Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Application note: www.tracopower.com/products/ten30-application.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN30-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN30 SERIES DC/DC Converters 30 Watt Wide 2:1 Input Range DC-DC Converter TEN 30 Series, 30 Watt Measures: 2.00 x 1.00 x 0.40” Outline Dimensions 15.24 (0.6) 5.08 (0.2) Pin-Out 2.54 (0.1) Pin Single Dual 3 2 1 1 +Vin (Vcc) +Vin (Vcc) 2 –Vin (GND) –Vin (GND) 3 Remote On/Off Bottom View 4 + Vout + Vout 5 –Vout Common 6 Trim –Vout 6 5 4 Dimensions in [mm], () = Inch 5.6 10.16 (0.22) (0.4) Pin diameter: 1.0 ±0.1 (0.04 ±0.004) 10.2 20.32 (0.4) (0.8) Pin pitch tolerances: ±0.25 (±0.01) 25.4 Case tolerances: ±0.5 (±0.02) (1.0) Heat-Sink (Option) Order code: TEN-HS1 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 17g (0.60oz) without converter Thermal impedance after assembling: 10 K/W 56.0 (2.2) max. Note: The product label on converter has to be re- Heat-sink moved before mounting the heat-sink. Thermal pad Clamp For volume orders converters will be supplied Converter with heat-sinks already mounted. Please con- tact factory for quotation. Separate heat-sinks are only available for 16.8 (0.66) max. prototypes and small quantity orders. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 25. 2014 www.tracopower.com Page 4 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN30-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 45.72 (1.8) 2.5 (0.1) 50.8 (2.0) 14.5 (0.57)