TRACO POWER DC/DC Converters TEN30-WI SERIES TEN 30WI Series, 30 Watt 30 Watt Ultra-Wide 4:1 Input Range DC-DC Converter Measures: 2.00 x 1.00 x 0.40” Features ◆ Ultra wide 4:1 input voltage range ◆ Single output voltage models from 1.8 to 15 VDC ◆ Dual output voltage models ◆ Extended operating temperature range: –40°C to 85°C ◆ Under voltage lockout ◆ Remote On/Off ◆ Shielded metal case with insulated baseplate ◆ Optional heatsink ◆ Lead free design - RoHS compliant The TEN 30WI series is a family of high performance 30W dc-dc converters fea- ◆ 3-year product warranty turing ultra wide 4:1 input voltage ranges in a compact low profile package with industry-standard footprint. A very high efficiency allows operating temperatures up to 85°C. A built-in filter for both input and output minimizes the need for external filtering. Further standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout and short circuit protection. Typical applications for these products are battery operated equipment and distrib- uted power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 30-2408WI 1.8 VDC 8‘000 mA 80 % TEN 30-2409WI 2.5 VDC 8’000 mA 85 % TEN 30-2410WI 3.3 VDC 6’000 mA 87 % TEN 30-2411WI 10 – 40 VDC 5.0 VDC 6‘000 mA 87 % TEN 30-2412WI (nominal 24 VDC) 12 VDC 2’500 mA 87 % TEN 30-2413WI 15 VDC 2’000 mA 88 % TEN 30-2422WI ±12 VDC ±1’250 mA 85 % TEN 30-2423WI ±15 VDC ±1’000 mA 86 % TEN 30-4808WI 1.8 VDC 8‘000 mA 81 % TEN 30-4809WI 2.5 VDC 8’000 mA 86 % TEN 30-4810WI 3.3 VDC 6’000 mA 87 % TEN 30-4811WI 18 – 75 VDC 5.0 VDC 6‘000 mA 88 % TEN 30-4812WI (nominal 48 VDC) 12 VDC 2’500 mA 87 % TEN 30-4813WI 15 VDC 2’000 mA 88 % TEN 30-4822WI ±12 VDC ±1’250 mA 86 % TEN 30-4823WI ±15 VDC ±1’000 mA 87 % http://www.tracopower.com Page 1 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN30-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN30-WI SERIES DC/DC Converters 30 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TEN 30WI 30 Watt Measures: 2.00 x 1.00 x 0.40” Input Specifications Input current at no load 1.8 Vout models: 35 / 20 mA typ. (nominal input 24/48 Vin) 2.5/3.3 Vout models: 40 / 25 mA typ. other models: 70 / 45 mA typ. Input current at full load 1.8 Vout models: 760 / 380 mA typ. (nominal input 24/48 Vin) 2.5/3.3 Vout models: 1030 / 510 mA typ. other models: 1500 / 750 mA typ. Input voltage variation (dv/dt) 5 V/ms, max. (complies with ETS 300 132 part. 4.4) Start-up voltage / under voltage lockout 24 Vin models: 10 VDC / 8 VDC (typ.) 48 Vin models: 18 VDC / 16 VDC (typ.) Surge voltage (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A with external capacitor (see note 1) ESD (input) EN 61000-4-2, perf. criteria B Fast transient (input) EN 61000-4-4, perf. criteria A Surge (input) EN 61000-4-5, perf. criteria B Output Specifications Voltage set accuracy ±1 % Output voltage adjustment ±10 % Regulation – Input variation Vin min. to Vin max. ±0.5 % max. – Load variation 10 – 100 %: single output models: ±0.5 % max. dual output models: ±1.0 % max. (balanced load) ±5 % max. (Load cross variation 25 % / 100 %) Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz Bandwidth): 75 mVpk-pk max. Start up time (nominal Vin and constant resistive load) 10 ms typ. Transient response setting time (25% load step change) 300 µs typ. Short circuit protection indefinite (automatic recovery) Over load protection 150 % of Iout max typ. foldback Thermal shutdown at +115°C typ Over voltage protection 1.8, 2.5 & 3.3 V output models: 3.9 V 5.0 V output models: 6.2 V 12 V output models: 15 V 15 V output models: 18 V Minimum load (only for dual output models) 10% of rated max current (operation at lower load condition will not damage these converters, however, they may not meet all listed specifications) Capacitive load 1.8 / 2.5 Vout models: 65’000 µF max./ 33’000 µF max. 3.3 / 5.0 Vout models: 19’500 µF max./ 10’200 µF max. 12 / 15 Vout models: 3’300 µF max./ 1’100 µF max. ±12 / ±15 Vout models: ±1’000 µF max./ ±680 µF max. (per output) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN30-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN30-WI SERIES DC/DC Converters 30 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TEN 30WI 30 Watt Measures: 2.00 x 1.00 x 0.40” General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –55°C to +105°C Thermal impedance – with heat-sink TEN-HS2 8.24 K/Watt – without heat-sink 10 K/Watt Derating www.tracopower.com/products/ten30wi-derating.pdf Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >750’000 h Isolation voltage (60sec.) – Input / Output 1‘500 VDC Isolation resistance – Input / Output >1‘000 M Ohm Isolation capacitance – Input / Output 1000 pF max. Remote On/Off – On: 3.5 ... 12 VDC or open circuit. – Off: 0 ... 1.2 VDC or short circuit pin 3 and pin 2 – Off idle current: 3 mA typ. Switching frequency 300 kHz typ. (pulse width modulation PWM) Vibration 10–55 Hz, 2G, 30 minutes along X,Y,Z Safety standards UL 60950, IEC/EN 60950, compliance up to 60 VDC input voltage (SELV limit) Safety approvals – UL/cUL www.ul.com > UL File no.: e188913 Environmental compliance – Reach www.tracopower.com/products/ten30wi-reach.pdf – RoHS RoHS directive 20011/65/EU Note 1: In order to meet conducted emissions EN55022-A and EN55011-A a capacitor between +Vin and -Vin has to be installed. The capacitor should be capable to handle 1 A ripple current. A suggestion is KMF Series of Nippon chemi-con, 220µF/100V, ESR 90mOhm. Output Voltage Adjustment Trim Trim up +Vout Trim down Ru Rd - Vout Trim Ru [kohm]* Ru [kohm]* output 1.8V 2.5V 3.3V 5.0V output 1.8V 2.5V 3.3V 5.0V +5% 1.2 4.3 6.8 4.7 –5% 1.8 6.8 8.2 5.6 +10% 0.068 0.82 1.5 0.56 –10% 0.1 0.82 0.68 0.68 output 12V 15V ±12V ±15V output 12V 15V ±12V ±15V +5% 47 47 27 33 –5% 56 56 33 39 +10% 8.2 6.8 2.2 2.7 –10% 5.6 2.2 2.7 3.3 *approximate values All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN30-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN30-WI SERIES DC/DC Converters 30 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TEN 30WI 30 Watt Measures: 2.00 x 1.00 x 0.40” Physical Specifications Casing material copper, nickel plated Baseplate material none conductive FR4 Potting material epoxy (UL 94V-0 -rated) Weight 48 g (1.69 oz) Soldering temperature max. 265°C / 10 sec. Outline Dimensions Pin-Out 7 3 Pin Single Dual 6 1 +Vin (Vcc) +Vin (Vcc) Bottom 2 2 –Vin (GND) –Vin (GND) 1 view 5 3 Remote On/Off 4 No pin +Vout 4 5 +Vout Common 6 –Vout –Vout 45.72 (1.8) 5.6 10.2 7 Trim (0.22) (0.4) 50.8 (2.0) Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitch tolerances: ±0.35 (±0.014) Case tolerances: ±0.5 (±0.02) Heat-sink TEN-HS2 Order code: TEN-HS2 (cont.: heat-sink, thermal pad, 2 clamps) 56.0 (2.2) max. Material: Aluminum Heat-sink Finish: Anodic treatment (black) Thermal pad Weight: 19 g (0.67oz) (without converter) Clamp Converter 17.2 (0.68) max. 3D step file: www.tracopower.com/products/ten30wi-3d.stp Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heat-sinks already mounted. Please con- tact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 11.2014 www.tracopower.com Page 4 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN30-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 40.6 (1.6) 10.16 10.16 10.16 5.1 (0.2) (0.4) (0.4) (0.4) 23.0 (0.9) 10.16 5.08 (0.2) (0.4) 12.7 (0.5)