TRACO POWER TEN40-2422N

TRACO POWER DC/DC Converters TEN40N SERIES 40 Watt Wide 2:1 Input Range DC-DC Converter TEN 40N Series, 40 Watt Measures: 2.00 x 1.00 x 0.40” CB Scheme Features IEC 60950-1 UL 60950-1 ◆ Highest power density: 40 W in 1” x 2” x 0.4” package ◆ Excellent efficiency up to 92 % ◆ Output voltage adjustable ◆ Remote On/Off ◆ Short circuit protection ◆ Over voltage protection ◆ I/O isolation 1500 VDC ◆ Operating temperature range The TEN 40N Series is a new range of isolated high performance dc-dc converter –40°C to +80°C modules. Due to the very high efficiency of up to 92% these 40 W converters come ◆ Fully RoHS compliant with a footprint of only 1.0” x 2.0”. The 15 models have a wide 2:1 input voltage ◆ 3-year product warranty range and a tight output voltage regulation. The output voltage is adjustable by ex- ternal resistor. Remote On/Off and protection against overpower and overvoltage are standard features of these converters. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Order code Input voltage range Output voltage Output current max. Efficiency TEN 40-1210N 3.3 VDC 8‘000 mA 89 % TEN 40-1211N 5.0 VDC 8’000 mA 89 % TEN 40-1212N 12 VDC 3‘333 mA 89 % 9 – 18 VDC TEN 40-1213N 15 VDC 2‘670 mA 90 % (nominal 12 VDC) TEN 40-1215N 24 VDC 1‘670 mA 91 % TEN 40-1222N ±12 VDC ±1’670 mA 88 % TEN 40-1223N ±15 VDC ±1‘330 mA 88 % TEN 40-2410N 3.3 VDC 8‘000 mA 90 % TEN 40-2411N 5.0 VDC 8’000 mA 91 % TEN 40-2412N 12 VDC 3‘333 mA 91 % 18 – 36 VDC TEN 40-2413N 15 VDC 2‘670 mA 91 % (nominal 24 VDC) TEN 40-2415N 24 VDC 1‘670 mA 91 % TEN 40-2422N ±12 VDC ±1’670 mA 89 % TEN 40-2423N ±15 VDC ±1‘330 mA 89 % TEN 40-4810N 3.3 VDC 8‘000 mA 90 % TEN 40-4811N 5.0 VDC 8’000 mA 91 % TEN 40-4812N 12 VDC 3‘333 mA 92 % 36 – 75 VDC TEN 40-4813N 15 VDC 2‘670 mA 92 % (nominal 48 VDC) TEN 40-4815N 24 VDC 1‘670 mA 91 % TEN 40-4822N ±12 VDC 1’670 mA 89 % TEN 40-4823N ±15 VDC 1‘330 mA 89 % http://www.tracopower.com Page 1 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN40N-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN40N SERIES 40 Watt Wide 2:1 Input Range DC-DC Converter DC/DC Converters TEN 40N Series Measures: 2.00 x 1.00 x 0.40” 40 Watt Input Specifications Input current at no load 12 Vin; 3.3 VDC models: 120 mA typ. (nominal input voltage) 12 Vin; 5.0, 12 & 24 VDC models: 160 mA typ. 12 Vin; 15 VDC models: 150 mA typ. 12 Vin; 12 & 15 VDC dual output models: 70 mA typ. / 60 mA typ. 24 Vin; 3.3 & 15 VDC models: 75 mA typ. 24 Vin; 5.0, 12 & 24 VDC models: 80 mA typ. / 85 mA typ. 24 Vin; 12 & 15 VDC dual output models: 50 mA typ. / 45 mA typ. 48 Vin; 3.3 VDC models: 40 mA typ. 48 Vin; other single output models: 50 mA typ. 48 Vin; dual output models: 65 mA typ. Surge voltage (100 msec. max.) 12 V models: 25 V max. 24 V models: 50 V max. 48 V models: 100 V max. Reflected input ripple current 12 V models: 50 mA typ. 24 V models: 30 mA typ. 48 V models: 20 mA typ. Start-up voltage / under voltage shut down 12 V models: 9.0 VDC max. / 8.3 VDC typ. 24 V models: 18 VDC max. / 16.5 VDC typ. 48 V models: 36 VDC / 33 VDC typ. Recommended input fuse (slow blow) 12 V models: 8000 mA 24 V models: 4000 mA 48 V models: 2000 mA Conducted noise (input) EN 55022 class A with external components see application note: EMC immunity – ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria B – Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A – Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria B Nippon chemi-con KXG 330 µF, 200 V – Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1.0 % Output voltage adjustment range 24 VDC models: +20 / –10 % other models: ±10 % with external resistor (see page 3) Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation single output models (0 – 100 %): 0.5 % max. dual output models balanced load (10 – 100 %): 1.0 % max. Minimum load single output models: 0 % dual output models: 10 % of rated max current (operation at lower load condition will not damage the converters. However, they may not meet all listed specifications) Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz Bandwidth) 3.3 & 5.0 VDC models: 100 mVpk-pk. typ. with external capacitors 1 µF M/C 10 µF T/C other models: 150 mVpk-pk typ. Transient response (25 % load step change) 250 µs typ. Output current limitation 110 % – 150 % of Iout max. Short circuit protection 24 VDC models: 0.3 Hz. typ. other models: hiccup mode 1.5 Hz, automatic recovery Capacitive load 3.3 VDC models: 21’000 µF max. 5.0 VDC models: 13’600 µF max. 12.0 VDC models: 2’400 µF max. 15.0 VDC models: 1’500 µF max. 24.0 VDC models: 600 µF max. ±12.0 VDC models: 1’200 µF max. ±15.0 VDC models: 750 µF max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN40N-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN40N SERIES 40 Watt Wide 2:1 Input Range DC-DC Converter DC/DC Converters TEN 40N Series Measures: 2.00 x 1.00 x 0.40” 40 Watt General Specifications Temperature ranges – Operating (natural convection cooling 20 LFM) –40°C to +80°C (see load derating) – Case temperature +105°C max. – Storage –50°C to +125°C Load derating – without heatsink 3.3 VDC models: 2.5 %/K above 66°C (natural convection cooling 20 LFM) other single output models: 1.6 %/K above 46°C dual output models: 1.5 %/K above 40°C – with heatsink 3.3 VDC models: 3.1 %/K above 73°C other single output models: 2.0 %/K above 57°C dual output models: 1.9 %/K above 52°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 328’000 h Isolation voltage (60 sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 1500 pF typ. Isolation resistance – Input/Output >1000 Mohm Switching frequency (fixed) 24 VDC models: 285 kHz typ. other models: 320 kHz typ. (pulse width modulation PWM) Altitude during operation 5‘000 m max. (16‘400 ft) approved Safety standards (designed to meet) IEC/EN 60950-1 (2nd Ed) + A1:2009 CAN/CSA-C22.2 No 60950-1-07 + Am1:2011 UL 60950-1, (2nd Ed) + Am1:2011 – Certification documents www.tracopower.com/overwiew/ten40n Remote On/Off – On: 3.5 to 12 VDC or open circuit. – Off: 0 to +1.2 VDC or short circuit pin 3 and pin 2 – Off idle current: 2.5 mA max. Physical Specifications Casing material aluminum Potting material epoxy (UL 94V-0 rated) Weight 30 g (1.05 oz) Soldering temperature max. 260°C / 10 sec. Environmental compliance – Reach www.tracopower.com/overview/ten40n – RoHS RoHS directive 2011/65/EU Application note: www.tracopower.com/products/ten40n-application.pdf Output Voltage Adjustment Trim up Trim Trim down +Vout Rd Ru Trim - Vout Ru [kohm]* Ru [kohm]* output 3.3V 5V 12V 15V output 24V output 3.3V 5V 12V 15V 24V +5% 7.34 12.30 41.40 5 0.15 +10% 27.38 –5% 8.51 16.53 47.15 63.35 38.04 +10% 0.65 0.48 2.70 3.58 +20% 0.34 –10% 0.50 1.24 1.35 4.92 1.12 *approximate values All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN40N-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN40N SERIES 40 Watt Wide 2:1 Input Range DC-DC Converter DC/DC Converters TEN 40N Series Measures: 2.00 x 1.00 x 0.40” 40 Watt Outline Dimensions 50.8 Pin-Out (2.0) Pin Single Dual 4 1 +Vin (Vcc) +Vin (Vcc) 1 2 –Vin (GND) –Vin (GND) 2 Bottom View 3 Remote On/Off 5 4 +Vout +Vout 3 6 5 –Vout Common 6 Trim –Vout (1.8) 45.72 2.54 (0.1) Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.04 ±0.002) Pin pitch tolerance: ±0.13 (±0.005) Case tolerances: ±0.25 (±0.01) * 11.0mm(0.43 inch) for 24V Output Models Heat-sink TEN-HS4 (optional) Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Heat-sink Material: Aluminum Thermal pad Clamp Finish: Anodic treatment (black) Converter Weight: 9 g (0.32oz) without converter Thermal impedance after assembling: 10 K/W 31.1 (1.22) 18.0 (0.71) Note: max. Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. April 21. 2015 www.tracopower.com Page 4 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN40N-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 10.16 5.08 (0.4) (0.2) 2.54 (0.1) 31.0 (1.22) max. 10.16 (0.4) 5.5 10.2 * 20.32 2.54 (0.8) (0.1) (0.22) (0.40) 25.4 (1.0)