TRACO POWER TEN40-4822WI

TRACO POWER DC/DC Converters TEN40-WI SERIES 40 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TEN 40WI Series, 40 Watt Measures: 2.00 x 2.00 x 0.40” UL 60950-1 Features ◆ High power density: 40W in 2”x2”x0.4” metal package ◆ Ultra wide 4:1 input voltage range ◆ Very high efficiency up to 87 % ◆ No minimum load required for single output models ◆ Over temperature protection ◆ Under voltage lockout ◆ Remote On/Off ◆ Shielded metal case with insulated baseplate ◆ Optional heat-sink ◆ 3-year product warranty The TEN 40WI series is a family of high performance 40W dc-dc converter modules featuring ultra wide 4:1 input voltage ranges in a compact low profile case with industry-standard footprint. A very high efficiency allows an operating temperature range of –40°C to 85°C. Further standard features include remote On/Off, output voltage trimming, over voltage protection, under voltage lockout, over temperature and short circuit protection. Typical applications for these products are battery operated equipment and distrib- uted power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 40-2410WI 3.3 VDC 10.0 A 86 % TEN 40-2411WI 5.0 VDC 8.0 A 87 % TEN 40-2412WI 9 – 36 VDC 12 VDC 3.35 A 87 % TEN 40-2413WI (24 VDC nominal) 15 VDC 2.65 A 87 % TEN 40-2422WI ±12 VDC ±1.65 A 86 % TEN 40-2423WI ±15 VDC ±1.35 A 86 % TEN 40-4810WI 3.3 VDC 10.0 A 86 % TEN 40-4811WI 5.0 VDC 8.0 A 88 % TEN 40-4812WI 18 – 75 VDC 12 VDC 3.35 A 87 % TEN 40-4813WI (48 VDC nominal) 15 VDC 2.65 A 87 % TEN 40-4822WI ±12 VDC ±1.65 A 86 % TEN 40-4823WI ±15 VDC ±1.35 A 86 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power htt.sager p://ww .com/traco-power w.tracopower.com-TEN40-WI-dc-dc-converter.html Page 1 of 4 h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN40-WI SERIES DC/DC Converters 40 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TEN 40WI 40 Watt Measures: 2.00 x 2.00 x 0.40” Input Specifications Input current (no load) 24 Vin single output models: 100 mA typ 48 Vin single output models: 60 mA typ . dual putput models: 30 mA typ Input current (full load) (nominal input 24/48 VDC) 3.3 VDC models: 1680 / 840 mA typ. other models: 2000 / 1000 mA typ. Input voltage variation (dv/dt) 5 V/ms, max. (complies with ETS300 132 part 4.4) Start-up voltage / under voltage lockout 24 Vin models: 9 VDC / 8 VDC (typ.) 48 Vin models: 18 VDC / 16 VDC (typ.) Surge voltage (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. EMC characteristics (with external capacitors) see application note: www.tracopower.com/products/ten40wi-application.pdf – Conducted noise EN 55022 level A, FCC part 15, level A – ESD EN 61000-4-2, air: ±8 KV contact: ±6 KV, perf. criteria A – Fast transient EN 61000-4-4, ±2 KV, perf. criteria B – Surge EN 61000-4-5, ±1 KV, perf. criteria A Output Specifications Voltage set accuracy (at nominal input and full load) ±1 % Output voltage adjustment ±10 % (see application note) Regulation – Input variation Vin min. to Vin max. 0.2 % max. – Load variation single output models: 0.5 % max. (0 – 100 % load) dual output models balanced load: 1.0 % max. (4 – 100 % load) – Load cross variation 25 % / 100 % 5 % max. Temperature coefficient 0.02 %/K max. Ripple and noise (20 MHz Bandwidth) 3.3 VDC & 5 VDC output models: 50 mVpk-pk max. dual outputs: 150 mVpk-pk max. all other outputs: 75 mVpk-pk max. Start up time (nominal Vin and constant resistive load) 25 ms typ. Transient response time (25 % load change) 250 µs typ. Short circuit protection indefinite (automatic recovery) Over load protection 150 % of Iout max. typ. foldback Thermal shutdown @ +110°C typ. Over voltage protection 3.3 VDC models: 3.9 V 5 VDC models 6.2 V 12/±12 DC models: 15 /±15 V 15 VDC output: 18 /±18 V Minimum load single output model: not required. dual output models: 1 % of rated max current (operation at lower load condition will not damage these converters, however, they may not meet all listed specifications) Capacitive load output models 3.3 VDC models: 25’000 µF max. 5.0 VDC models: 13’000 µF max. 12 VDC models: 2’300 µF max. 15 VDC models: 1’500 µF max. ±12 VDC models: 1’200 µF max. (each output) ±15 VDC models: 750 µF max. (each output) http://www.tracopower.com Page 2 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN40-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN40-WI SERIES DC/DC Converters 40 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TEN 40WI 40 Watt Measures: 2.00 x 2.00 x 0.40” General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +105°C max. – Storage –55°C to +125°C Derating see application note Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >660’000 h Isolation voltage (60 sec.) – Input / Output 1‘500 VDC Isolation resistance – Input / Output >1‘000 M Ohm Isolation capacitance – Input / Output 2500 pF max. Remote On/Off – On: 3.0 ... 12 VDC or open circuit. – Off: 0 ... 1.2 VDC or short circuit pin 3 and pin 2 – Off idle current: 2.5 mA max. Switching frequency (fixed) 300 kHz typ. (Pulse width modulation PWM) Vibration 10 – 55 Hz, 10G, 30 minutes along X,Y,Z Safety standards UL 60950-1, IEC/EN 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File: e188913 Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHs RoHS Directive 2011/65/EU Physical Specifications Casing material copper, nickel plated Baseplate material none conductive FR4 Potting material epoxy (UL 94V-0 -rated) Weight 60 g (2.1 oz) Soldering temperature max. 265°C / 10 sec. Application note: www.tracopower.com/products/ten40wi-application.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN40-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN40-WI SERIES DC/DC Converters 40 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TEN 40WI 40 Watt Measures: 2.00 x 2.00 x 0.40” Outline Dimensions Pin-Out 8 Pin Single Dual 7 3 1 +Vin (Vcc) +Vin (Vcc) 6 Bottom 2 5 view 2 –Vin (GND) –Vin (GND) 1 4 Remote On/Off 3 4 – Sense* + Vout 5 + Sense* Common 5.6 45.72 (1.8) 6 + Vout Common (0.22) 10.2 50.8 (2.0) (0.4) 7 – Vout – Vout 8 Trim Dimensions in [mm], () = Inch *Sense line to be connected to the output Pin diameter: 1.0 ±0.05 (0.04 ±0.002) either at the module or at the load under Pin pitch tolerances: ±0.35 (±0.014) regard of polarity. Case tolerances: ±0.5 (±0.02) Heat-Sink (Option) Order code: TEN-HS3 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 22 g (0.78oz) (without converter) Thermal impedance after assembling: 7.6 K/W 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 17.0 (0.67) max. Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heat- sinks already mounted. Please contact factory for quota- tion. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 25. 2014 www.tracopower.com Page 4 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN40-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 50.8 (2.0) 7.62 5.08 7.62 5.08 (0.3) (0.2) (0.3) (0.2) 5.08 (0.2) 25.2 (0.1) 5.08 10.16 (0.2) (0.4) 27.9 (1.10)