TRACO POWER TEN40-4822WIN

Traco power DC/DC Converters TEN40-WIN SERIES 40 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TEN 40WIN Series, 40 Watt Measures: 2.00 x 1.00 x 0.40” CB Features Scheme ◆ Highest power density: 40 W in 1” x 2” x 0.4” package ◆ Ultra wide 4:1 input range ◆ Excellent efficiency up to 90 % ◆ Output voltage adjustable ◆ Remote On/Off ◆ Protection against short circuit and over voltage ◆ I/O isolation 1500 VDC ◆ Operating temperature range –40°C to +75°C The TEN 40WIN Series is a new range of isolated high performance DC/DC-con- ◆ 3-year product warranty verter modules. Due to the very high efficiency of up to 90% these 40 W converters come with a footprint of only 1.0” x 2.0”. The 12 models have an ultra wide 4:1 input voltage range and a tight output voltage regulation. The output voltage is ad- justable by external resistor. Remote On/Off and protection against overpower and over voltage are standard features of these converters. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is limited. Models Order code Input voltage range Output voltage Output current max. Efficiency TEN 40-2410WIN 3.3 VDC 8‘000 mA 89 % 5.0 VDC 8’000 mA 90 % TEN 40-2411WIN TEN 40-2412WIN 12 VDC 3‘330 mA 89 % 9 – 36 VDC TEN 40-2413WIN 15 VDC 2‘670 mA 89 % (nominal 24 VDC) TEN 40-2415WIN 24 VDC 1‘670 mA 91 % TEN 40-2422WIN ±12 VDC ±1’670 mA 88 % TEN 40-2423WIN ±15 VDC ±1‘330 mA 88 % TEN 40-4810WIN 3.3 VDC 8‘000 mA 89 % TEN 40-4811WIN 5.0 VDC 8’000 mA 90 % TEN 40-4812WIN 12 VDC 3‘330 mA 90 % 18 – 75 VDC TEN 40-4813WIN 15 VDC 2‘670 mA 90 % (nominal 48 VDC) TEN 40-4815WIN 24 VDC 1‘670 mA 89 % TEN 40-4822WIN ±12 VDC ±1’670 mA 88 % TEN 40-4823WIN ±15 VDC ±1‘330 mA 88 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN40-WIN-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om http://www.tracopower.com Page 1 of 4 Traco power TEN40-WIN SERIES DC/DC Converters 40 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TEN 40WIN Series 40 Watt Measures: 2.00 x 1.00 x 0.40” Input Specifications Input current at no load 24 Vin; 3.3 & 5.0 VDC models: 90 mA typ. (nominal input voltage) 24 Vin; 12 VDC models: 95 mA typ. 24 Vin; 15 & 24 VDC models: 105 mA typ. / 115 mA typ. 24 Vin; dual output models: 65 mA typ. 48 Vin; 3.3 & 5.0 VDC models: 55 mA typ. 48 Vin; 12 & 15 VDC models: 60 mA typ. / 65 mA typ. 48 Vin; 24 VDC models: 75 mA typ. 48 Vin; dual output models: 45 mA typ. Surge voltage (100 msec. max.) 24 V models: 50 V max. 48 V models: 100 V max. Reflected input ripple current 24 V models: 30 mA typ. 48 V models: 20 mA typ. Conducted noise (input) EN 55022 level A, FCC part 15, level A with external capacitor see: application note Start-up voltage / under voltage shut down 24 V models: 9 VDC / 8.3 VDC (or lower) 48 V models: 18 VDC / 16.5 VDC (or lower) Recommended input fuse (slow blow) 24 V models: 8000 mA 48 V models: 4000 mA Output Specifications Voltage set accuracy single output models: ±1.0 % dual output models (balanced load): ±2.0 % Output voltage adjustment range ±10 % with external resistor (see page 3) Regulation – Input variation Vin min. to Vin max. ±0.5 % max. – Load variation single output models (0 – 100%): ±0.5 % max. dual output models (9 – 100%): ±1.0 % max. Minimum load single output models: 0 % dual output models: 9 % of rated max current (operation at lower load condition will not damage the converters. However, they may not meet all listed specifications) Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz Bandwidth) 3.3 & 5.0 VDC models: 100 mVpk-pk. typ. with external capacitors 1 µF M/C 10 µF T/C other models: 150 mVpk-pk typ. Transient response (25 % load step change) 250 µs typ. Short circuit protection hiccup mode, indefinite (automatic recovery) Over power protection at 150 % Over voltage protection at 120 % of Vout nom. typ. Capacitive load 3.3 VDC models: 21’000 µF max. 5.0 VDC models: 13’600 µF max. 12.0 VDC models: 2’400 µF max. 15.0 VDC models: 1’500 µF max. 24.0 VDC models: 600 µF max. ±12.0 VDC models: 1’200 µF max. (each output) ±15.0 VDC models: 750 µF max. (each output) Application note: www.tracopower.com/products/ten40win-application.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN40-WIN-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco power TEN40-WIN SERIES DC/DC Converters 40 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TEN 40WIN Series 40 Watt Measures: 2.00 x 1.00 x 0.40” Output Voltage Adjustment Single output models only (open = nominal output voltage) Trim up Trim Trim down +Vout Rd Ru Trim - Vout Ru [kOhm]* Rd [kOhm]* output 3.3V 5V 12V 15V 24V output 3.3V 5V 12V 15V 24V +5% 7.34 12.30 41.40 5 0.15 27.38 –5% 8.51 16.53 47.15 63.35 38.04 +10% 0.65 0.48 2.70 3.58 0.34 –10% 0.50 1.24 1.35 4.92 1.12 *approximate values General Specifications Temperature ranges – Operating (natural convection cooling 20 LFM) –40°C to +75°C (see load derating) – Case temperature +105°C max. – Storage –50°C to +125°C Load derating – without heatsink 2.5 %/K above 55°C – with heatsink 2.5 %/K above 65°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 330’000 h Isolation voltage (60 sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 1500 pF typ Isolation resistance – Input/Output >1000 Mohm Switching frequency (fixed) 320 kHz typ. (pulse width modulation PWM) Safety standards CAN/CSA-C22.2 No 60950-1-07 Incl. AM1 (2011) ANSI/UL Std No 60950-1, 2nd Ed. Incl. AM1 (2011) IEC 60950-1:2005 (2nd Edition); +A1:2009 – Certification documents www.tracopower.com/overview/ten40win Remote On/Off – On: 4.7 to 12 VDC or open circuit. – Off: 0 to +1.2 VDC or short circuit pin 3 and pin 2 – Off idle current: 2.5 mA max. Physical Specifications Casing material aluminum black anodized Potting material epoxy (UL 94V-0 rated) Weight 30 g (1.05 oz) Soldering temperature max. 260°C / 10 sec. Environmental compliance – Reach www.tracopower.com/overview/ten40win – RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN40-WIN-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco power TEN40-WIN SERIES DC/DC Converters 40 Watt Ultra-Wide 4:1 Input Range DC-DC Converter TEN 40WIN Series 40 Watt Measures: 2.00 x 1.00 x 0.40” Outline Dimensions 50.8 (2.0) Pin-Out 4 Pin Single Dual 1 1 +Vin (Vcc) +Vin (Vcc) 2 Bottom View 5 2 –Vin (GND) –Vin (GND) 3 Remote On/Off 3 6 +Vout +Vout 4 (1.8) 45.72 2.54 (0.1) 5 –Vout Common 6 Trim –Vout Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.04 ±0.002) Pin pitch tolerance: ±0.25 (±0.01) Case tolerances: ±0.25 (±0.01) Heat-sink TEN-HS4 (optional) Heat-sink Thermal pad Clamp Converter Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) 31.1 (1.22) Material: Aluminum 18.0 (0.71) Finish: Anodic treatment (black) max. Weight: 9.0 g (0.31oz) without converter Thermal impedance after assembling: 10 K/W Note: Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 13. 2015 www.tracopower.com Page 4 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN40-WIN-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 17.78 (0.7) 7.62 (0.3) 2.54 (0.1) 31.0 (1.22) max. 10.16 (0.4) 5.5 11.0 20.32 2.54 (0.8) (0.1) (0.22) (0.43) 25.4 (1.0)