TRACO POWER TEN5-4822

TRACO POWER DC/DC Converters TEN5 SERIES TEN 5 Series, 6 Watt 5 Watt Wide 2:1 Input Range DC-DC Converter Measures: 1.25 x 0.8 x 0.4” CB Features Scheme UL 60950-1 ◆ Wide 2:1 input range ◆ Full SMD-design ◆ High efficiency up to 86% ◆ Extended operating temperature range –40°C to 85°C ◆ I/O isolation 1’500 VDC ◆ Indefinite short circuit protection ◆ Input filter to meet EN 55022, class A and FCC, level A without external components The TEN 5 Series is a range of DC/DC-converter modules with wide input range ◆ Shielded metal case with insulated of 2:1. State of the art SMD-technology guarantees a product with very high re- baseplate liability and good cost /performance ratio. I/O-isolation of 1’500 VDC together ◆ 24-pin DIP with industry standard pinout with conducted noise compliance to EN 55022-A and FCC level A makes these ◆ High reliability, MTBF >1 Mio. h converters ideal for a wide range of applications in communications, mobile bat- tery powered equipments and industrial systems. ◆ 3-year product warranty Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TEN 5-0510 3.3 VDC 1200 mA 75 % 5 VDC 1000 mA 79 % TEN 5-0511 TEN 5-0512 12 VDC 500 mA 82 % 4.5 – 7 VDC TEN 5-0513 15 VDC 400 mA 82 % (5 VDC nominal) TEN 5-0521 ±5 VDC ±500 mA 79 % TEN 5-0522 ±12 VDC ±250 mA 82 % TEN 5-0523 ±15 VDC ±200 mA 82 % TEN 5-1210 3.3 VDC 1200 mA 77 % TEN 5-1211 5 VDC 1000 mA 81 % TEN 5-1212 12 VDC 500 mA 84 % 9 – 18 VDC TEN 5-1213 15 VDC 400 mA 84 % (12 VDC nominal) TEN 5-1221 ±5 VDC ±500 mA 81 % TEN 5-1222 ±12 VDC ±250 mA 84 % TEN 5-1223 ±15 VDC ±200 mA 84 % TEN 5-2410 3.3 VDC 1200 mA 79 % TEN 5-2411 5 VDC 1000 mA 83 % 12 VDC 500 mA 86 % TEN 5-2412 18 – 36 VDC TEN 5-2413 15 VDC 400 mA 86 % (24 VDC nominal) TEN 5-2421 ±5 VDC ±500 mA 83 % TEN 5-2422 ±12 VDC ±250 mA 86 % TEN 5-2423 ±15 VDC ±200 mA 86 % TEN 5-4810 3.3 VDC 1200 mA 79 % TEN 5-4811 5 VDC 1000 mA 83 % TEN 5-4812 12 VDC 500 mA 86 % 36 – 75 VDC TEN 5-4813 15 VDC 400 mA 86 % (48 VDC nominal) TEN 5-4821 ±5 VDC ±500 mA 83 % TEN 5-4822 ±12 VDC ±250 mA 86 % TEN 5-4823 ±15 VDC ±200 mA 86 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN5-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN5 SERIES DC/DC Converters 5 Watt Wide 2:1 Input Range DC-DC Converter TEN 5 Series 6 Watt Measures: 1.25 x 0.8 x 0.4” Input Specifications Input current no load 5 Vin models: 80 mA typ. 12 Vin models: 30 mA typ. 24 Vin models: 15 mA typ. 48 Vin models: 8 mA typ. Start-up voltage / 5 Vin models: 4.4 VDC / 4.0 VDC (or lower) under voltage shut down 12 Vin models: 8.0 VDC / 8.0 VDC (or lower) 24 Vin models: 16.0 VDC / 16.0 VDC (or lower) 48 Vin models: 32.0 VDC / 32.0 VDC (or lower) long term operation at undervoltage will demage the converter! Surge voltage (1 sec. max.) 5 Vin models: 10 V max. 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reverse voltage protection 1.0 A max. Conducted noise (input) EN 55022 class A, FCC part 15, level A Output Specifications Voltage set accuracy 1.0 % Regulation – Input variation Vin min. to Vin max. 0.3 % max. – Load variation 20 – 100 % single output models: 1.0 % max. dual output models balanced load: 2.0 % max. dual output models unbalanced load: 5.0 % max. (25 % / 100 %) Minimum load 5 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk typ., 75 mVpk-pk max. Temperature coefficient ±0.02 %/K Output current limitation >120 % of Iout max., foldback Short-circuit protection indefinite (automatic recovery) Start up time (nominal Vin and constant resistive load) 10 ms typ. (for power on and remote on) Capacitive load single output models: 6800 µF max. dual output models: 1000 µF max. (each output) General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +90°C max. – Storage –50°C to +125°C Derating 3.3 %/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio. h Isolation voltage (60 sec.) – Input/Output 1’500 VDC Isolation capacitance – Input/Output 380 pF typ. Isolation resistance – Input/Output >1‘000 M Ohm (500 VDC) Switching frequency 300 kHz typ. (Pulse frequency modulation PFM) Safety standards UL 60950-1, IEC/EN 60950-1 Safety approval CSA File No. 226037 http://directories.csa-international.org Environmental compliance – Reach www.tracopower.com/products/ten5-reach.pdf – RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 2 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN5-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN5 SERIES DC/DC Converters 5 Watt Wide 2:1 Input Range DC-DC Converter TEN 5 Series 6 Watt Measures: 1.25 x 0.8 x 0.4” Physical Specifications Casing material steel, metal Baseplate material non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 16.9 g (0.59 oz) Soldering temperature max. 260°C / 10 sec. Outline Dimensions Pin-Out 23 2 Pin Single Dual 22 3 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 No pin Common 11 No con. –Vout 16 9 14 +Vout +Vout 16 –Vout Common 14 11 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) 2.54 15.22 Insulated Baseplate (0.6) (0.1) 4.1 10.2 20.3 (0.4) (0.16) (0.8) Dimensions in [mm], () = Inch Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) Tolerances ±0.25 (±0.01) Pin pitch tolerances ±0.13 (±0.005) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. January 06. 2015 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN5-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 31.8 (1.25) 15.24 5.08 2.54 (0.2) (0.6) (0.1) 4.5 (0.18) Bottom view