TRACO POWER TEN50-4813

Traco Power DC/DC Converters TEN50 SERIES 50 Watt Wide 2:1 Input Range DC-DC Converter TEN 50 Series, 50 Watt Measures: 2.00 x 1.00 x 0.40” CB Features Scheme ◆ Highest power density: 50 W in 1” x 2” x 0.4” package ◆ Excellent efficiency up to 92 % ◆ Operating temperature range –40°C to +85°C ◆ No minimum load required ◆ Output voltage adjustable ◆ Remote On/Off ◆ I/O isolation 1500 VDC ◆ 3-year product warranty The TEN 50 Series is a range of isolated high performance dc-dc converter mod- ules. Due to the very high efficiency of up to 92% and the use of highest reli- able components these 50 W converters come with a footprint of only 1.0” x 2.0”. The 12 models have a wide 2:1 input voltage range and a tight output volt- age regulation. They do not need a minimum load and a offer a high efficiency also at low load conditions. The output voltage is adjustable by external resistor. Remote On/Off and protection against overload and short circuit are standard features of these converters. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Order code Input voltage range Output voltage Output current max. Efficiency TEN 50-1210 3.3 VDC 10‘000 mA 89 % TEN 50-1211 5.0 VDC 10’000 mA 90 % 9 – 18 VDC 12 VDC 4‘170 mA 91 % TEN 50-1212 (nominal 12 VDC) TEN 50-1213 15 VDC 3‘330 mA 91 % TEN 50-1215 24 VDC 2‘080 mA 91 % TEN 50-2410 3.3 VDC 10‘000 mA 89 % TEN 50-2411 5.0 VDC 10’000 mA 92 % 18 – 36 VDC TEN 50-2412 12 VDC 4‘170 mA 92 % (nominal 24 VDC) TEN 50-2413 15 VDC 3‘330 mA 92 % TEN 50-2415 24 VDC 2‘080 mA 91 % TEN 50-4810 3.3 VDC 10‘000 mA 89 % TEN 50-4811 5.0 VDC 10’000 mA 92 % 36 – 75 VDC TEN 50-4812 12 VDC 4‘170 mA 92 % (nominal 48 VDC) TEN 50-4813 15 VDC 3‘330 mA 92 % TEN 50-4815 24 VDC 2‘080 mA 91 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 1 of 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN50-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power TEN50 SERIES DC/DC Converters 50 Watt Wide 2:1 Input Range DC-DC Converter TEN 50 Series 50 Watt Measures: 2.00 x 1.00 x 0.40” Input Specifications Input current at no load 12 V; 3.3 & 5.0 VDC models: 85 mA typ. / 110 mA typ. (nominal input voltage) 12 V; 12 & 15 VDC models: 160 mA typ. 12 V; 24 VDC models: 250 mA typ. 24 V; 3.3 & 5.0 VDC models: 50 mA typ. / 70 mA typ. 24 V; 12 & 15 VDC output models: 85 mA typ. 24 V; 24 VDC models: 110 mA typ. 48 V; 3.3 & 5.0 VDC models: 35 mA typ. / 45 mA typ. 48 V; 12 & 15 VDC models: 50 mA typ. 48 V; 24 VDC models: 60 mA typ. Surge voltage (100 msec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reflected input ripple current 12 Vin models: 50 mA typ. 24 Vin models: 40 mA typ. 48 Vin models: 30 mA typ. Conducted noise (input) EN 55022 class A, FCC part 15 level A with external input capacitor (1210 MLCC): 12 Vin models: 22 µF /25 V 24 Vin models: 3.3 µF /50 V 48 Vin models: 2.2 µF /100 V Start-up voltage / under voltage shut down 12 Vin models: 9.0 VDC max./ 8.3 VDC (or lower) 24 Vin models: 18 VDC max./ 16.5 VDC (or lower) 48 Vin models: 36 VDC max./ 33 VDC (or lower) Recommended input fuse (slow blow) 12 Vin models: 10 A 24 Vin models: 5 A 48 Vin models: 2.5 A Conducted noise (input) EN 55022 class A with external capacitor see application note: EMC immunity – ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A – Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A – Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria A Nippon chemi-con KXG 330 µF, 100 V – Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1.0 % Output voltage adjustment range 24 VDC models: +20 / –10 % other models: ±10 % with external resistor (see page 3) Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 0 – 100 % 0.5 % max. Minimum load not required Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz Bandwidth) 3.3 & 5.0 VDC models: 100 mVpk-pk. typ. (measured with 1 µF MLCC and a 10 µF tantalum capacitor) 12, 15 & 24 VDC models: 150 mVpk-pk typ. Transient response (alignment to 1% at load step change 75% to 100% ) 250 µs typ. Output current limitation at 150% of Iout max. Short circuit protection 24 VDC models: 0.3 Hz. typ. other models: hiccup mode 1.5 Hz, automatic recovery Capacitive load 3.3 VDC models: 25’800 µF max. 5.0 VDC models: 17’000 µF max. 12.0 VDC models: 2’900 µF max. 15.0 VDC models: 1’900 µF max. 24.0 VDC models: 750 µF max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN50-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power TEN50 SERIES DC/DC Converters 50 Watt Wide 2:1 Input Range DC-DC Converter TEN 50 Series 50 Watt Measures: 2.00 x 1.00 x 0.40” General Specifications Temperature ranges – Operating (natural convection cooling 20 LFM) –40°C to +85°C (see load derating) – Case temperature +105°C max. – Storage –50°C to +125°C Load derating – without heatsink 1.1 %/K above 50°C – with heatsink 1.3 %/K above 60°C Thermal impedance – Natural convection 20 LFM 12°C/W – Natural convection 20 LFM with heatsink 10°C/W Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >220’000 h Isolation voltage (60 sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 2200 pF max. (100 kHz, 1 V) Isolation resistance – Input/Output >1000 Mohm (500 VDC) Switching frequency 24 VDC models: 285 kHz typ. other models: 320 kHz typ. (pulse width modulation PWM) Remote On/Off – On: 3.5 to 12 VDC to -Vin or open circuit. – Off: 0 to +1.2 VDC or short circuit to -Vin – Off idle current: 2.5 mA typ. Safety standards UL/cUL 60950-1 2nd edition, IEC 60950-1:2005 (2nd Edition); +A1:2009 – Certification documents www.tracopower.com/overwiew/ten50 Physical Specifications Casing material alluminium alloy, 6-side shielded, insulating baseplate Potting material epoxy (UL 94V-0 rated) Weight 30 g (1.05 oz) Soldering temperature max. 260°C / 10 sec. (1.5 mm from casing) Environmental compliance – Reach www.tracopower.com/overview/ten50 – RoHS directive 2011/65/EU Application note: www.tracopower.com/products/ten50-application.pdf Output Voltage Adjustment Trim up Trim Trim down +Vout Rd Ru Trim - Vout Ru [kohm]* Ru [kohm]* output 3.3V 5V 12V 15V output 24V output 3.3V 5V 12V 15V 24V +5% 7.34 12.30 41.40 5 0.15 +10% 27.38 –5% 8.51 16.53 47.15 63.35 38.04 +10% 0.65 0.48 2.70 3.58 +20 % 0.34 –10% 0.50 1.24 1.35 4.92 1.12 *approximate values All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is r http://www.tracopower esponsibility of each customer to thor .com oughly test each product and part number under their unique parameters and environments to ensure a product will work pr Page 3 ooperly and r f 4 eliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN50-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om pending Traco Power TEN50 SERIES DC/DC Converters 50 Watt Wide 2:1 Input Range DC-DC Converter TEN 50 Series 50 Watt Measures: 2.00 x 1.00 x 0.40” Outline Dimensions 50.8 (2.0) Pin-Out Pin Single 4 1 1 +Vin (Vcc) 2 Bottom View 2 –Vin (GND) 5 3 Remote On/Off 3 6 4 +Vout 5 –Vout (1.8) 45.72 2.54 (0.1) 6 Trim Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.04 ±0.002) Pin pitch tolerance: ±0.13 (±0.005) Case tolerances: ±0.25 (±0.01) Heat-sink TEN-HS4 (optional) Order code: TEN-HS4 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Heat-sink Thermal pad Weight: 9 g (0.31oz) without converter Clamp Thermal impedance after assembling: 10 K/W Converter 31.1 (1.22) 18.0 (0.71) Note: max. Before attaching the heatsink, the product label on converter has to be removed for optimal performance. For volume orders we can supply the converters with heatsink already mounted. Please contact us for a relative quotation. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. April 21. 2015 www.tracopower.com Page 4 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN50-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 10.16 5.08 (0.4) (0.2) 2.54 (0.1) 31.0 (1.22) max. 10.16 (0.4) 5.5 11.0 20.32 2.54 (0.8) (0.1) (0.22) (0.43) 25.4 (1.0)