TRACO POWER TEN6-4822N

Traco Power DC/DC Converters TEN6N SERIES 6 Watt Wide 2:1 Input Range DC-DC Converter TEN 6N Series, 6 Watt Measures: 1.25 x 0.80 x 0.40” CB Scheme IEC 60950-1 Features UL 60950-1 ◆ 2:1 input voltage range ◆ High efficiency ◆ Operating temperature range –40°C to +85°C ◆ No minimum load required ◆ Input filter meets EN 55022, class A ◆ Overload protection ◆ I/O-isolation 1’500 VDC ◆ DIP-24 plastic package The TEN-6N series is designed for an optimized cost/performance ratio of ◆ Industry standard pinout DC/DC converters with output power of 6 Watt. General features like no minimum load requirement, overload protection, internal ◆ 3-year product warranty filter for EN55022 class A and high efficiency make these converters easy to design in. With the popular DIP-24 standard package they are also a drop in replacement for many cost critical applications. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 6-1210N 3.3 VDC 1200 mA 75 % TEN 6-1211N 5 VDC 1200 mA 78 % TEN 6-1212N 12 VDC 500 mA 82 % TEN 6-1213N 9 – 18 VDC 15 VDC 400 mA 82 % (12 VDC nominal) TEN 6-1215N 24 VDC 250 mA 84 % TEN 6-1221N ±5 VDC ±500 mA 78 % TEN 6-1222N ±12 VDC ±250 mA 82 % TEN 6-1223N ±15 VDC ±200 mA 82 % TEN 6-2410N 3.3 VDC 1200 mA 77 % TEN 6-2411N 5 VDC 1200 mA 80 % TEN 6-2412N 12 VDC 500 mA 84 % TEN 6-2413N 18 – 36 VDC 15 VDC 400 mA 84 % TEN 6-2415N (24 VDC nominal) 24 VDC 250 mA 84 % TEN 6-2421N ±5 VDC ±500 mA 80 % TEN 6-2422N ±12 VDC ±250 mA 84 % TEN 6-2423N ±15 VDC ±200 mA 84 % TEN 6-4810N 3.3 VDC 1200 mA 77 % TEN 6-4811N 5 VDC 1200 mA 80 % TEN 6-4812N 12 VDC 500 mA 84 % TEN 6-4813N 36 – 75 VDC 15 VDC 400 mA 84 % TEN 6-4815N (48 VDC nominal) 24 VDC 250 mA 84 % TEN 6-4821N ±5 VDC ±500 mA 80 % TEN 6-4822N ±12 VDC ±250 mA 84 % TEN 6-4823N ±15 VDC ±200 mA 84 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power http.sager ://ww.com/traco-power w.tracopower.com -TEN6N-dc-dc-converter.html Page 1 of 3 h t t p: / / pow e r. sa ge r. c om Traco Power TEN6N SERIES 6 Watt Wide 2:1 Input Range DC-DC Converter Measures: 1.25 x 0.80 x 0.40” DC/DC Converters TEN 6N Series 6 Watt Input Specifications Input current at no load 12 Vin models: 40 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Input current at full load 12 Vin, 3.3VDC models: 440 mA typ. 12 Vin other models: 610 mA typ. 24 Vin, 3.3VDC models: 220 mA typ. 24 Vin other models: 300 mA typ. 48 Vin, 3.3VDC models: 110 mA typ. 48 Vin other models: 150 mA typ. Recommended input fuse (slow blow) 12 Vin models: 1500 mA 24 Vin models: 700 mA 48 Vin models: 350 mA Start-up voltage / under voltage shut down 12 Vin models: 9.0 VDC / 8.5 VDC (or lower) 24 Vin models: 18 VDC / 16 VDC (or lower) 48 Vin models: 36 VDC / 35 VDC (or lower) Surge voltage (1 sec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise internal filter to meet EN 55022 class A Output Specifications Voltage set accuracy ±2 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 0 – 100 % single output models: 1.2 % max. dual output models balanced load: 1.2 % max. dual output models 50%/100% unbalanced load: 3.0 % max. Minimum load not required Temperature coefficient ±0.02 %/K Ripple and noise (20 MHz Bandwidth) 80 mVp-p max. Dynamic load response (change from 75 % to 100 % load) ±3 % peak variation typ. 300 μS response time typ. Current limitation 145 % of Iout max. typ., constant power Short circuit protection continuous, automatic recovery Capacitive load 3.3 & 5.0 VDC models: 470 μF max. 12 & 15 VDC models: 100 μF max. 24 VDC models: 47 μF max. dual output models: 100 μF max. (each output) General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –50°C to +125°C Derating 3.3 & 5.0 VDC models: 2.5 %/K above +60°C other models: 3.3 %/K above +70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1 Mio. h Isolation voltage (60 sec.) – Input/Output 1’500 VDC (functional insulation) Isolation capacitance – Input/Output (100 KHz, 1 V) 1000 pF typ. Isolation resistance – Input/Output (500 VDC) >1‘000 M Ohm Switching frequency 330 kHz typ. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 2 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN6N-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om Traco Power TEN6N SERIES 6 Watt Wide 2:1 Input Range DC-DC Converter DC/DC Converters Measures: 1.25 x 0.80 x 0.40” TEN 6N Series 6 Watt General Specifications Safety standards UL/cUL 60950-1, IEC/EN 60950-1 – Certification documents www.tracopower.com/overview/ten6n Environmental compliance – Reach www.tracopower.com/overview/ten6n – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material non conductive plastic (UL 94V-0-rated) Potting material epoxy (XM-2109 & XY-2110, UL 94V-0-rated) Weight 13.0 g (0.46 oz) Soldering temperature (1.5mm from case for 10 sec.) max. 260°C Application note: www.tracopower.com/products/ten6n-application.pdf Outline Dimensions Pin-Out 23 911 Pin Single Dual Bottom view 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 23 22 16 14 9 No pin Common 11 No function –Vout 31.8 (1.25) 14 +Vout +Vout –Vout Common 16 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) 4.5 Dimensions in [mm], () = Inch (0.18) Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) 2.54 15.24 (0.60) 5.08 (0.10) (0.20) Tolerances ±0.25 (±0.01) Pin pich tolerances ±0.13 (±0.0005) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 14. 2015 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager .com/traco-power-TEN6N-dc-dc-converter www.tracopowe .html r.com Page 3 of 3 h t t p: / / pow e r. sa ge r. c om 4.1 (0.40) 2.54 15.24 (0.60) 10.2 (0.16) (0.10) 20.3 (0.80)