TRACO POWER TEN60-4812

TRACO POWER DC/DC Converters TEN60 SERIES 60 Watt Wide 2:1 Input Range DC-DC Converter TEN 60 Series, 60 Watt Measures: 2.00 x 2.00 x 0.40” UL 60950-1 Features ◆ Highest power density: 60W in a 51x51x10mm (2”x2”x0.4”) package ◆ Wide 2:1 input voltage range ◆ Very high efficiency up to 90% ◆ No minimum load required ◆ Over temperature protection ◆ Under voltage lock-out circuit ◆ Remote On/Off ◆ Shielded metal case with insulated baseplate ◆ Optional heatsink ◆ Lead free design - RoHS compliant ◆ 3-year product warranty The TEN 60 series is a family of high performance 60W dc-dc converter modules with wide 2:1 input voltage ranges in a compact low profile case with industry-standard footprint. A very high efficiency allows an operating temperature range of –40°C to 85°C. Built-in filters for both input and output minimizes the need for external filtering. Further standard features include remote On/Off, output voltage trimming, over volt- age protection, under voltage lockout and short circuit protection. Typical applications for these products are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 60-2410 3.3 VDC 14.0 A 89 % TEN 60-2411 18 – 36 VDC 5.0 VDC 12.0 A 90 % TEN 60-2412 (24 VDC nominal) 12 VDC 5.0 A 90 % TEN 60-2413 15 VDC 4.0 A 90 % TEN 60-2415 24 VDC 2.5 A 89 % TEN 60-4810 3.3 VDC 14.0 A 89 % TEN 60-4811 36 – 75 VDC 5.0 VDC 12.0 A 90 % TEN 60-4812 (48 VDC nominal) 12 VDC 5.0 A 90 % TEN 60-4813 15 VDC 4.0 A 90 % TEN 60-4815 24 VDC 2.5 A 89 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power http.sager ://ww.com/traco-power w.tracopower.com -TEN60-dc-dc-converter.html Page 1 of 4 h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN60 SERIES 60 Watt Wide 2:1 Input Range DC-DC Converter DC/DC Converters TEN 60 Measures: 2.00 x 2.00 x 0.40” 60 Watt Input Specifications Input current at no load 3.3 V output models: 100 / 80 mA typ. (nominal input 24/48 Vin) 5.0 V output models: 130 / 90 mA typ. 12 V, 15 V & 24 V output models: 50 / 30 mA typ. Input current at full load 3.3 V output models: 2260 / 1140 mA typ. (nominal input 24/48 Vin) 5.0 V output models: 2940 / 1450 mA typ. 12 V & 15 V output models: 2900 / 1450 mA typ. 24 V output models: 2940 / 1470 mA typ. Input voltage variation (dv/dt) 5 V/ms, max. (complies with ETS300 132 part 4.4) Start-up voltage 24 Vin models: 17 VDC (or lower) 48 Vin models: 34 VDC (or lower) Under voltage shut down (lock-out circuit) 24 Vin models: 15 VDC typ. 48 Vin models: 32 VDC typ. Surge voltage (100 msec. max.) 24 Vin models: 50 V 48 Vin models: 100 V Conducted noise (input) EN 55022 level A, FCC part 15, level A with external capacitor, see application note: ESD (input) EN 61000-4-2, perf. criteria A Fast transient (input) EN 61000-4-4, perf. criteria A Surge (input) EN 61000-4-5, perf. criteria A Output Specifications Voltage set accuracy ±1 % Output voltage adjustment ±10 % Regulation – Input variation Vin min. to Vin max. 0.2 % max. – Load variation 0 – 100 % 0.5 % max. Temperature coefficient ±0.02 %/K max. Ripple and noise (20 MHz Bandwidth) 3.3 V & 5 V output models: 75 mVpk-pk max. 12 V & 15 V output models: 100 mVpk-pk max. 24 V output models: 200 mVpk-pk max. Start up time (nominal Vin and constant resistive load) 20 ms typ. Transient response time (25% load change) 250 µs typ. Short circuit protection indefinite (automatic recovery) Over load protection 150 % of Iout max typ. Minimum Load not required Thermal shutdown at +110°C typ Over voltage protection 3.3 V output models: 3.7 V 5 V output models: 5.6 V 12 V output models: 13.8 V 15 V output models: 16.8 V 24 V output models: 30.0 V Capacitive load 3.3 V output models: 36’000 µF 5 V output models: 20’400 µF 12 V output models: 3’550 µF 15 V output models: 2’300 µF 24 V output models: 885 µFGeneral Specifications Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 2 of 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN60-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN60 SERIES 60 Watt Wide 2:1 Input Range DC-DC Converter DC/DC Converters TEN 60 Measures: 2.00 x 2.00 x 0.40” 60 Watt General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +110°C max. – Storage –55°C to +125°C Derating see application note: Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign) >400’000 h Isolation (Input/Output) – Voltage 1‘600 VDC – Capacitance 1’500 pF max. – Resistance >1‘000 MOhm Remote On/Off – On: 3.0 ... 12 VDC or open circuit. – Off: 0 ... 1.2 VDC or short circuit pin 3 and pin 2 – Off idle current: 3.0 mA max. Switching frequency (fixed) 300 kHz typ. (Pulse width modulation PWM) Vibration 10 – 55Hz, 10G, 30 minutes along X,Y,Z Safety standards UL 60950-1, IEC/EN 60950-1 Safety approvals – UL/cUL www.ul.com > UL File no.: e188913 Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material copper, nickel plated Baseplate material none conductive FR4 Potting material epoxy (UL 94V-0-rated) Weight 60 g (2.1oz) Soldering temperature max. 265°C / 10 sec. Application note: www.tracopower.com/products/ten60-application.pdf Outline Dimensions Pin-Out 8 Pin 7 3 1 +Vin (Vcc) 6 Bottom 2 2 –Vin (GND) 5 view 1 3 Remote On/Off 4 4 –Sense 5 +Sense 45.7 6 +Vout 5.6 (1.8) (0.22) 7 –Vout 50.8 10.2 8 Trim (0.4) (2.0) Dimensions in [mm], () = Inch Pin diameter: 1.0 ±0.05 (0.02 ±0.002) Pin pitch tolerances: ±0.35 (±0.014) Case tolerances: ±0.5 (±0.02) All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 3 of 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN60-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 50.8 (2.0) 7.62 5.08 7.62 5.08 7.62 (0.3) (0.2) (0.3) (0.2) (0.3) 5.08 10.16 12.7 (0.2) (0.4) (0.5) TRACO POWER TEN60 SERIES 60 Watt Wide 2:1 Input Range DC-DC Converter DC/DC Converters TEN 60 Measures: 2.00 x 2.00 x 0.40” 60 Watt Outline Dimensions Heat-sink TEN-HS3 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter 17.0 (0.67) max. Order code: TEN-HS3 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 22 g (0.78oz) (without converter) Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heat- sinks already mounted. Please contact factory for quota- tion. Separate heat-sinks are only available for prototypes and small quantity orders. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 25. 2014 www.tracopower.com Page 4 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN60-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 25.2 (0.1)