TRACO POWER TEN8-4822

TRACO POWER DC/DC Converters TEN8 SERIES 8 Watt Wide 2:1 Input Range DC-DC Converter TEN 8 Series, 8 Watt Measures: 1.25 x 0.8 x 0.4” Features ◆ DIP–24 package with industry standard footprint ◆ Wide 2:1 input voltage range ◆ Input filter meets EN 55022, class A ◆ Extended operating temperature range: -40°C to +85°C ◆ Remote On/Off ◆ Shielded metal casing with insulated baseplate ◆ Lead free design, RoHS compliant ◆ 3-year product warranty The TEN 8 series is a family of high performance 8 Watt dc/dc-converter modules featuring wide 2:1 input voltage ranges in a DIP-24 package with industry stan- dard footprint. A very high efficiency allows an operating temperature range of –40°C to +85°C. A built-in EMI input filter complies with EN 55022, class A without external components. Further standard features include remote On/Off and short- circuit protection. Typical applications for these converters are battery operated equipment, instru- mentation, communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited on the PCB. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 8-1210 3.3 VDC 2‘000 mA 80 % TEN 8-1211 5 VDC 1’500 mA 83 % TEN 8-1212 12 VDC 665 mA 88 % 9 – 18 VDC TEN 8-1213 15 VDC 535 mA 87 % (12 VDC nominal) TEN 8-1221 ±5 VDC ±800 mA 83 % TEN 8-1222 ±12 VDC ±335 mA 87 % TEN 8-1223 ±15 VDC ±265 mA 85 % TEN 8-2410 3.3 VDC 2’000 mA 80 % TEN 8-2411 5 VDC 1’500 mA 83 % TEN 8-2412 12 VDC 665 mA 86 % 18 – 36 VDC TEN 8-2413 15 VDC 535 mA 85 % (24 VDC nominal) TEN 8-2421 ±5 VDC ±800 mA 82 % TEN 8-2422 ±12 VDC ±335 mA 86 % TEN 8-2423 ±15 VDC ±265 mA 85 % TEN 8-4810 3.3 VDC 2’000 mA 80 % TEN 8-4811 5 VDC 1’500 mA 83 % 665 mA 86 % TEN 8-4812 12 VDC 36 – 75 VDC TEN 8-4813 15 VDC 535 mA 86 % (48 VDC nominal) TEN 8-4821 ±5 VDC ±800 mA 85 % TEN 8-4822 ±12 VDC ±335 mA 87 % TEN 8-4823 ±15 VDC ±265 mA 87 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN8-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN8 SERIES DC/DC Converters 8 Watt Wide 2:1 Input Range DC-DC Converter TEN 8 Series 8 Watt Measures: 1.25 x 0.8 x 0.4” Input Specifications Input current (no load) 12 Vin models: 15 mA typ. 24 Vin models: 15 mA typ. 48 Vin models: 10 mA typ. Input current (full load) 12 Vin; 3.3 VDC models: 720 mA typ. 12 Vin; other output models: 800 mA typ. 24 Vin; 3.3 VDC models: 360 mA typ. 24 Vin; other output models: 400 mA typ. 48 Vin; 3.3 VDC models: 180 mA typ. 48 Vin; other output models: 200 mA typ. Surge voltage (100 msec. max.) 12 Vin models: 36 V max.. 24 Vin models: 50 V max.. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A For 12 Vin models with external input capacitor: 4.7 µF / 25 V 1210 MLCC ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A Fast transient / Surge EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV perf. criteria A With external input capacitor e.g. Nippon chemi-con KY 220 µF, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max 0.2 % max. – Load variation 0 – 100 % single output models: 1 % max. dual output models: 1 % max. (balanced load) 5 % max. (Load cross variation 25 % / 100 %) Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk typ. Start up time (nominal Vin and constant resistive load) 700 ms max. – Remote on/off 5 ms typ. Transient response (25% load step change) 200 µs typ. Short circuit protection indefinite (automatic recovery) Over load protection 150 % of Iout max. typ. foldback Capacitive load 3.3 Vout models: 3300 µF max. 5 Vout models / ±5 Vout models: 1600 µF max. / ±1000 µF max. 12 Vout models / ±12 Vout models: 350 µF max. / ±160 µF max. 15 Vout models / ±15 Vout models: 240 µF max. / ±100 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Casing +100°C max. – Storage –55°C to +105°C Derating 3.3 %/K above +70°C Humidity (non condensing) 95 % rel H max. All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN8-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEN8 SERIES DC/DC Converters 8 Watt Wide 2:1 Input Range DC-DC Converter TEN 8 Series 8 Watt Measures: 1.25 x 0.8 x 0.4” General Specifications Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >3.5 Mio h Isolation voltage (60sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 300 pF max. Isolation Resistance – Input/Output >1000 MOhm Switching frequency 300 kHz typ. (pulse width modulation PWM) Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F – Test conditions www.tracopower.com/products/mil810.pdf Safety standards UL/cUL 60950-1, IEC/EN 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 Remote On/Off On: 3.5 ... 12 VDC or open circuit Off: 0 ... 1.2 VDC or short circuit pin 1 and pin 2/3 Off idle current: 2.5 mA Environmental compliance – Reach www.tracopower.com/products/ten8-reach.pdf – RoHS RoHS directive 2011/65/EU Physical Specifications Casing material copper, nickel plated Baseplate material non conductive plastic Potting material epoxy (UL94V-0 rated) Weight 17 g (0.60oz) Soldering temperature max. 265°C / 10 sec. Outline Dimensions Pin-Out Pin Single Dual 1 1 Remote On/Off Remote On/Off 2 23 22 3 2 –Vin (GND) –Vin (GND) 3 –Vin (GND) –Vin (GND) 9 No con. Common 11 No con. –Vout 16 9 14 +Vout +Vout 14 11 –Vout Common 16 22 +Vin (Vcc) +Vin (Vcc) 2.4 15.24 23 +Vin (Vcc) +Vin (Vcc) Insulated Baseplate (0.6) (0.1) 3.8 10.2 20.3 (0.8) (0.15) (0.4) Dimensions in [mm], () = Inch Pin diameter ø 0.5 ±0.05 (0.02 ±0.002) Tolerances ±0.5 (±0.02) Pin pich tolerances ±0.25 (±0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 18. 2014 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEN8-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 32 (1.26) 25.4 2.0 (1.0) (0.08) 15.24 2.54 5.08 2.54 (0.6) (0.2) (0.1) (0.1) Bottom view