TRACO POWER TEP100-4816

TRACO POWER DC/DC Converters TEP100 SERIES 100 Watt Chassis Mount DC-DC Converter TEP 100 Series, 100 Watt Measures: 3.35 x 2.40 x 1.18” Features UL 60950-1 ◆ Rugged, compact metal case ◆ Easy chassis mount ◆ Screw terminal adaptor available for easy connection ◆ Wide 2:1 input voltage range ◆ Full load operation up to 60°C with convection cooling ◆ Soft start ◆ Under voltage lock-out circuit ◆ Reverse input voltage protection (Models pictured with chassis mount adaptor and optional heatsink) ◆ Input protection filter ◆ 3-year product warranty The TEP-100 Series is a family of isolated high performance optimal thermal management very simple. dc-dc converter modules with ultra-wide 2:1 input voltage ranges For easy connection there is also an unique adaptor available with which come in a rugged, sealed metal case. screw terminals. A very high efficiency allows an operating tempe- These converters are suitable for a wide range of applications, rature up to +60°C with natural convection cooling without power but the product is designed particularly also for industrial appli- derating. Further features include output voltage trimming, Remote cations where often no PCB mounting is possible but the module On/Off and under voltage lockout. The very wide input voltage range has to be mounted on a chassis. Four threaded M3 inserts in and reverse input voltage protection make these converters also an the module makes chassis mount or attachment of a heatsink for interesting solution for battery operated systems. Models Order code* Input voltage Output voltage Output current max. Efficiency typ. TEP 100-1210 3.3 VDC 25.0 A 90 % TEP 100-1211 5.0 VDC 20.0 A 91 % TEP 100-1212 12 VDC 8.4 A 91 % 9 – 18 VDC TEP 100-1213 15 VDC 6.7 A 91 % (12 VDC nominal) TEP 100-1215 24 VDC 4.2 A 90 % TEP 100-1216 28 VDC 3.6 A 90 % TEP 100-1218 48 VDC 2.1 A 90 % TEP 100-2410 3.3 VDC 25.0 A 91 % TEP 100-2411 5.0 VDC 20.0 A 93 % TEP 100-2412 12 VDC 8.4 A 93 % 18 – 36 VDC TEP 100-2413 15 VDC 6.7 A 93 % (24 VDC nominal) TEP 100-2415 24 VDC 4.2 A 92 % TEP 100-2416 28 VDC 3.6 A 92 % TEP 100-2418 48 VDC 2.1 A 92 % 3.3 VDC 25.0 A 91 % TEP 100-4810 TEP 100-4811 5.0 VDC 20.0 A 93 % TEP 100-4812 12 VDC 8.4 A 93 % 36 – 75 VDC TEP 100-4813 15 VDC 6.7 A 93 % (48 VDC nominal) TEP 100-4815 24 VDC 4.2 A 92 % TEP 100-4816 28 VDC 3.6 A 92 % TEP 100-4818 48 VDC 2.1 A 92 % * – add suffix –CM, –CMF for models with chassis mount adaptor, see last page. – add suffix –N for negative remote control, see page 3 -> Remote On/Off http://www.tracopower.com Page 1 of 6 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEP100-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEP100 SERIES 100 Watt Chassis Mount DC-DC Converter DC/DC Converters Measures: 3.35 x 2.40 x 1.18” TEP 100 Series 100 Watt Input Specifications Input current at no load 12 Vin; 3.3 – 15 VDC models: 160 mA typ. 12 Vin; 24 – 48 VDC models: 100 mA typ. 24 Vin; 3.3 – 15 VDC models: 185 mA typ. 24 Vin; 24 – 48 VDC models: 85 mA typ. 48 Vin; 3.3 – 15 VDC models: 90 mA typ. 48 Vin; 24 – 48 VDC models: 40 mA typ. Input current at full load 12 Vin models: 9.4 A typ. 24 Vin models: 4.6 A typ. 48 Vin models: 2.3 A typ. Start-up voltage 12 Vin models: 8.5 VDC (or lower) 24 Vin models: 17.5 VDC (or lower) 48 Vin models: 35.5 VDC (or lower) Under voltage shut down (lock-out circuit) 12 Vin models: 7.5 VDC typ. 24 Vin models: 16 VDC typ. 48 Vin models: 34 VDC typ Surge voltage (100 msec. max.) 12 Vin models: 36 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise EN 55022 level A, FCC part 15, level A (chassis mount option –CFM required) EMC immunity EN 50121-3-2 – ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A – Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A – Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV perf. criteria A Nippon chemi-con KY 200 µF, 100 V, ESR 48 Ohm or with chassis mount option –CFM – Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Reverse voltage protection parallel diode Output Specifications Voltage set accuracy ±1 % Output voltage adjustment +10 % / –20 % by external resistor see application note: Regulation – Input variation Vin min. to Vin max. 0.2 % max. – Load variation (0 – 100 %) 3.3 – 15 VDC models: 0.3 % max. 24 – 48 VDC models: 0.3 % max. Temperature coefficient ±0.02 %/K Minimum load not required Remote sense 10 % max. of Vout nom. (including trim up value) Ripple and noise (20 MHz Bandwidth) 3.3 & 5 VDC models: 75 mVpk-pk max. 12 & 15 VDC models: 100 mVpk-pk max. 24 & 28 VDC models: 200 mVpk-pk max. 48 VDC models: 300 mVpk-pk max. http://www.tracopower.com Page 2 of 6 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEP100-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEP100 SERIES 100 Watt Chassis Mount DC-DC Converter DC/DC Converters Measures: 3.35 x 2.40 x 1.18” TEP 100 Series 100 Watt Output Specifications Start up time (nominal Vin and constant resistive load) 25 ms typ. (at power On or remote On) Transient response (25% load step change) 200 µs typ. Output current limitation at 110 -140 % of Iout max. Over voltage protection at 115 -130 % of Vout nom. Short circuit protection indefinite, automatic recovery Capacitive load 3.3 & 5 VDC models: 40‘000 µF max. 12 VDC models: 7‘000 µF max. 15 VDC models: 4‘460 µF max. 24 VDC models: 1‘750 µF max. 28 VDC models: 1‘280 µF max. 48 VDC models: 430 µF max. General Specifications Temperature ranges – Operating –40°C to +75°C – Case temperature +105°C max. – Storage –55°C to +125°C Thermal impedance – without Heatsink 6.7°C/W – with Heatsink 4.7°C/W Derating See derating graphs page 4 Over temperature protection at 115°C Thermal shock acc. MIL-STD-810F Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign) 331‘000 h Isolation voltage (60sec.) – Input/Output 2’250 VDC (basic insulation) – Input/Case 1’600 VDC Isolation capacitance – Input/Output 2500 pF max. Isolation resistance – Input/Output (500 VDC) >1 GOhm min. Switching frequency 300 kHz typ. (puls width modulation) Safety standards UL 60950-1 , IEC/EN 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 Remote On/Off – positive logic (standard) – On: 3 to 12 VDC or open circuit – Off: 0 to 1.2 VDC or short circuit pin 1 and 3 – negative logic (option -N) – On: 0 to 1.2 VDC or short circuit pin 1 and 3 – Off: 3 to 12 VDC or open circuit – Off idle current: 3 mA Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Application note: www.tracopower.com/products/tep100-application.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 6 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEP100-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEP100 SERIES 100 Watt Chassis Mount DC-DC Converter DC/DC Converters Measures: 3.35 x 2.40 x 1.18” TEP 100 Series 100 Watt Output Power Derating Models with heatsink Models without heatsink 24 Vin models: Output 3.3–15 VDC 24 Vin models: Output 3.3–15 VDC 24 Vin models: Output 24–48 VDC 24 Vin models: Output 24–48 VDC 48 Vin models: Output 3.3–15 VDC 48 Vin models: Output 3.3–15 VDC 48 Vin models: Output 24–48 VDC 48 Vin models: Output 24–48 VDC http://www.tracopower.com Page 4 of 6 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEP100-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEP100 SERIES 100 Watt Chassis Mount DC-DC Converter DC/DC Converters Measures: 3.35 x 2.40 x 1.18” TEP 100 Series 100 Watt Specifications Casing material metal Potting material silicone (UL94V-0 rated) Base material FR4 Vibration acc. MIL-STD-810F Dimensions TEP 100 module 4 x M3 THD Pin-Out (trough hole) Pin 1 5 1 – Vin 2 6 2 Case Bottom view 7 3 Remote On/Off 3 8 4 + Vin 5 – Vout 4 9 6 – Sense* 7 Trim + Sense* 8 0.19 (4.8) 1.90 (48.26) Weight: 97 g (3.42 oz) 9 + Vout *Sense line to be connected 2.28 (57.9) to the output either at the Pin diameter pin 5 & 9: 0.08 (2.0) module or at the load under Pin diameter other pins: 0.04 (1.0) regard of polarity. TEP-HS1 Heatsink (pictured with heatsink mounted) 2.28 (57.9) Order code: TEP-HS1 Includes heatsink with termal pad and mounting screws For to order modules with mounted heatsink ask factory. Weight: 135 g (4.76oz) Top view (Heatsink + Converter) Dimensions in Inch, () = mm Tolerances: ±0.02 (±0.5) Pin pich tolerances: ±0.01 (±0.25) Mounting hole pich tolerances: ±0.01 (±0.25) http://www.tracopower.com Page 5 of 6 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEP100-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 2.40 (61.0) 0.95 0.20 0.5 2.40 (61.0) (24.2) (5.1) (12.7) 0.45 0.023 2.00 (50.80) (11.4) (0.6) 0.30 (7.62) 0.70 (17.78) 1.00 (25.40) TRACO POWER TEP100 SERIES 100 Watt Chassis Mount DC-DC Converter DC/DC Converters Measures: 3.35 x 2.40 x 1.18” TEP 100 Series 100 Watt Chassis Mount Adaptor TEP 100 module with chassis mount adabtor (suffix –CM or –CMF) For easy chassis mounting the converter modules can be supplied with an adaptor option consisting of a screw terminal connection board (soldered to converter pins)and a chassis mount adaptor. In addition this Chassis mount option is available with an EMI-filter(see EMI specification) Suffix –CM: Chassis mount adaptor Suffix –CMF: Chassis mount adaptor with EMI filter 2.00 (50.8) 2.40 (61.0) Please note that adaptors cannot be ordered as seperate 0.14 2.126 (54.0) (3.5) items but are factory assembled. Connection Pin 1 – Vin 2 Case Weight: –CM 200 g (7.05oz) 3 Remote On/Off Weight: –CMF 287 g (10.12oz) 4 + Vin 5 – Vout 6 – Sense* *Sense line to be connected 7 Trim to the output either at the 8 + Sense* module or at the load under regard of polarity. 9 + Vout 4 x Ø0.17 (4.3) Dimensions in Inch, () = mm Tolerances ±0.02 (±0.5) Mounting hole pich tolerances ±0.01 (±0.25) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 25. 2014 www.tracopower.com Page 6 of 6 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEP100-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 3.35 (85.0) 1.53 (38.8) 1.1 (28.0) 0.14 3.071 (78.0) 0.68 0.68 (3.5) (17.3) (17.3) 1.60 (40.6) 0.89 (22.2)