TRACO POWER TEP100-7216WIR

DC/DC Converters TEP 100WIR Series, 100 Watt Features ◆ Compact metal package ◆ Ultra wide 4:1 input voltage ranges 9–36, 18–75, 43–160 VDC ◆ EN 50155 approval for railway applications ◆ Very high efficiency up to 93% ◆ No minimum load ◆ Soft start (Models pictured with optional heatsink) ◆ Adjustable output voltage +10/-20% ◆ Sense line The TEP 100WIR Series is a family of isolated high performance dc-dc converter ◆ Remote On/Off input modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed ◆ Under voltage lock-out circuit industry standard half brick package. ◆ Reverse input voltage protection A very high efficiency allows full power operation without forced air cooling at 60°C This temperature can be increased to 70°C with optional mounted heatsink or up ◆ Over temperature protection to 85°C when mounted on an iron base plate. The very wide input voltage range ◆ Optional heatsink and reverse input voltage protection make these converters interesting solution for ◆ Optional as chassis mount models with battery operated systems. Typical applications are in telecom/datacom, industry screw terminal block and EMI Filter control and railway systems for on board power distribution. These series is available in many optional designs on demand --> see options. ◆ 3-year product warranty Standard Models Order code Input voltage Output voltage Output current max. Efficiency typ. TEP 100-2411WIR 5 VDC 20 A 93 % TEP 100-2412WIR 9 – 36 VDC 12 VDC 8.4 A 90 % TEP 100-2415WIR (24 VDC nominal) 24 VDC 4.2 A 90 % TEP 100-2416WIR 28 VDC 3.6 A 90 % TEP 100-2418WIR 48 VDC 2.1 A 90 % TEP 100-4812WIR 12 VDC 8.4 A 90 % TEP 100-4815WIR 18 – 75 VDC 24 VDC 4.2 A 90 % TEP 100-4816WIR (48 VDC nominal) 28 VDC 3.6 A 92 % TEP 100-4818WIR 48 VDC 2.1 A 91 % TEP 100-7212WIR 12 VDC 8.4 A 90 % TEP 100-7215WIR 43 – 160 VDC 24 VDC 4.2 A 90 % TEP 100-7216WIR (110 VDC nominal) 28 VDC 3.6 A 90 % TEP 100-7218WIR 48 VDC 2.1 A 91 % Options TEP-HS1 Heat-sink for standard version (incl. mounting screws and thermal pad) TEP-MK1 Din-rail mounting kit for chassis mount models (incl. mounting screws) TCK-xxx Common mode chokes for filter proposals to meet EN55032 class A/B --> see application note Models with 3.3 VDC/~ 25 A or 5.0 VDC/~ 20 A or 15 VDC/~ 6.7 A output Chassis mount models with screw terminal block on demand Chassis mount models with screw terminal block and input filter to meet EN 55032 class A Negative (passive = Off) Remote On/Off function (standard is passive = On) http://www.tracopower.com Page 1 of 5 DC/DC Converters TEP 100WIR Series 100 Watt Input Specifications Input current at no load (nominal input voltage) 24 Vin models: 25 mA typ. 48 Vin models: 20 mA typ. 110 Vin models: 10 mA typ. Start-up voltage 24 Vin models: 9.0 VDC max. 48 Vin models: 18 VDC max. 110 Vin models: 43 VDC max. Under voltage shut down (lock-out circuit) 24 Vin models: 7.3 – 8.1 VDC 48 Vin models: 15.5 – 16.3 VDC 110 Vin models: 33.0 – 36.0 VDC Surge voltage (1 sec. max.) 24 Vin models: 50 VDC 48 Vin models: 100 VDC 110 Vin models: 185 VDC Conducted noise EN 55032 class A/B with external components see application note EMC immunity EN 50121-3-2 – ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A – Radiated immunity EN 61000-4-3, 20 V/m, perf. criteria A – Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV perf. criteria A 24 / 48 Vin models: 2 chemi-con KY 220 µF, 100 V, ESR 48 mOhm 110 Vin models: 2 chemi-con KXJ 150 µF, 250 V – Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Reverse voltage protection parallel diode Recommended input fuse (slow blow) 24 Vin models: 20 A 48 / 110 Vin models: 10 A Output Specifications Voltage set accuracy (at full load, nominal input) ±1 % Output voltage adjustment +10 % / –20 % by external resistor see application note Regulation – Input variation Vin min. to Vin max. 0.1 % max. – Load variation (0 – 100%) 0.1 % max. Temperature coefficient ±0.02 %/K Minimum load not required Remote sense 10 % max. of Vout nom. (trim up value to subtract) Ripple and noise (20 MHz bandwidth) 5 VDC model: 75 mVp-p typ. 12 VDC models: 100 mVp-p typ. 24 / 28 VDC models: 200 mVp-p typ. 48 VDC models: 300 mVp-p typ. Start up time (nominal Vin and constant resistive load) 75 ms typ. (at power On or remote On) Transient response (25% load step change) 250 µs max. Output current limitation at 120 – 150 % of Iout max. Over voltage protection at 115 – 130 % of Vout nom. Short circuit protection continuous, automatic recovery. Max. capacitive load 5 VDC model: 40‘000 µF 12 VDC models: 7‘000 µF 24 VDC models: 1‘750 µF 28 VDC models: 1‘280 µF 48 VDC models: 430 µF http://www.tracopower.com Page 2 of 5 DC/DC Converters TEP 100WIR Series 100 Watt General Specifications Temperature ranges – Operating –40°C to +75°C (with derating) – Case temperature +115°C max. – Storage –55°C to +125°C Thermal impedance – without heat-sink 6.7°C/W – with heat-sink 4.7°C/W Power Derating depending on installation! – without heat-sink 3.3 %/K above +55°C – with heat-sink 4.0 %/K above +65°C – with iron base plate (19” x 3.5” x 0.063”) 6.7 %/K above +85°C please refer to application note for temperature measure point that should not exceed 115°C. Over temperature protection at +120°C Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F – Test conditions www.tracopower.com/products/mil810.pdf Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 400‘000 h Isolation voltage (60sec.) – Input/Output 110 Vin models: 3’000 VDC (reinforced insulation) – Input/ Case 1‘500 VDC – Input/Ouput other models: 2‘250 VDC (basic insulation) – Input/Case 1‘600 VDC Isolation capacitance – Input/Output 2500 pF max. Isolation resistance – Input/Output (500 VDC) >1 GOhm min. Switching frequency 24 / 48 Vin models: 250 kHz typ. (pulse width modulation) 110 Vin models: 300 kHz typ. (pulse width modulation) Safety standards – Railway immunity EN 50155, – UL online certification E188913, QQGQ2 UL 60950-1 2nd edition + AM1 IEC/EN 60950-1 – Certification documents www.tracopower.com/overview/tep100wir Remote On/Off – positive logic (standard) – On: 3 to 12 VDC or open circuit – Off: 0 to 1.2 VDC or short circuit pin 1 and 3 – negative logic (option) – On: 0 to 1.2 VDC or short circuit pin 1 and 3 – Off: 3 to 12 VDC or open circuit – Off idle current: 3 mA Environmental compliance – Reach www.tracopower.com/info/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU – Flammability identified acc. EN 45545-2 www.tracopower.com/info/en45545-declaration.pdf All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 5 DC/DC Converters TEP 100WIR Series 100 Watt General Specifications Casing material 24 / 48 Vin models: metal 110 Vin models: aluminium base-plate with plastic case Potting material silicone (UL94V-0 rated) Base material FR4 Dimensions TEP 100WIR module 4 x M3 THD Pin-Out (trough hole) 1 5 Pin 1 – Vin 2 6 2 Case Bottom view 7 3 Remote On/Off 3 8 4 + Vin 5 – Vout 4 9 6 – Sense* 7 Trim 8 + Sense* 0.19 (4.8) 1.90 (48.26) Weight: 105 g (3.70oz) 9 + Vout *Sense line to be connected 2.28 (57.9) to the output either at the Pin diameter pin 5 & 9: 0.08 (2.0) module or at the load under Pin diameter other pins: 0.04 (1.0) regard of polarity. TEP-HS1 Heatsink (pictured with heatsink mounted) 2.28 (57.9) Order code: TEP-HS1 Includes heatsink with termal pad and mounting screws To order modules with mounted heatsink ask factory. Weight: 142 g (5.01oz) Top view (Heatsink + Converter) Dimensions in Inch, () = mm Tolerances ±0.02 (±0.5) Pin pich tolerances ±0.01 (±0.25) Mounting hole pich tolerances ±0.01 (±0.25) http://www.tracopower.com Page 4 of 5 2.40 (61.0) 0.95 0.20 0.5 2.40 (61.0) (24.2) (5.1) (12.7) 0.45 0.023 2.00 (50.80) (11.4) (0.6) 0.30 (7.62) 0.70 (17.78) 1.00 (25.40) DC/DC Converters TEP 100WIR Series 100 Watt Options (on demand) Chassis mount models with screw terminal block Chassis mount models with screw terminal block and input filter to meet EN 555032 class A TEP-MK1 DIN-rail clip for chassis mount models 1.33(33.8) 1.53(38.8) 1.87(47.5) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. March 7. 2018 www.tracopower.com Page 5 of 5