TRACO POWER TEP160-7216WIRCM

TRACO POWER DC/DC Converters TEP160-WIRCM SERIES 160 Watt High Density Brick DC-DC Converter TEP 160WIR Series, 144 – 182 Watt Measures: 2.40 x 2.28 x 0.50” Features ◆ Compact metal package ◆ Ultra wide 4:1 input voltage ranges 8.5–36, 16.5–75, 43–160 VDC ◆ EN 50155 approval for railway applications ◆ Very high efficiency up to 91% ◆ No minimum load ◆ Soft start (Models pictured with optional heatsink) ◆ Ajustable output voltage +10/-20% ◆ Sense line The TEP 160WIR Series is a family of isolated high performance dc-dc converter ◆ Remote On/Off input modules with ultra-wide 4:1 input voltage ranges which come in a rugged, sealed ◆ Under voltage lock-out circuit industry standard half brick package. ◆ Reverse input voltage protection A very high efficiency allows full power operation without forced air cooling at 25°C This temperature can be increased to 40°C with optional mounted heatsink or up ◆ Over temperature protection to 60°C when mounted on an iron base plate. The very wide input voltage range ◆ Optional Heatsink and reverse input voltage protection make these converters interesting solution for ◆ Optional as chassis mount models with battery operated systems. Typical applications are in telecom/datacom, industry screw terminal block and EMI Filter control and railway systems for on board power distribution. These series is available in many optional designs on demand --> see options. ◆ 3-year product warranty Standard Models Order code Input voltage Output voltage Output current max. Efficiency typ. TEP 160–2412WIR 12 VDC 12 A 90 % TEP 160–2413WIR 8.5 – 36 VDC 15 VDC 9.5 A 91 % TEP 160–2415WIR (24 VDC nominal) 24 VDC 6.0 A 90 % TEP 160–2416WIR 28 VDC 5.0 A 90 % TEP 160–2418WIR 48 VDC 3.0 A 90 % TEP 160–4812WIR 12 VDC 13 A 91 % TEP 160–4813WIR 16.5 – 75 VDC 15 VDC 10 A 91 % TEP 160–4815WIR (48 VDC nominal) 24 VDC 6.5 A 91 % TEP 160–4816WIR 28 VDC 5.5 A 91 % TEP 160–4818WIR 48 VDC 3.2 A 91 % TEP 160–7212WIR 12 VDC 15 A 90 % TEP 160–7213WIR 43 – 160 VDC 15 VDC 12 A 90 % TEP 160–7215WIR (110 VDC nominal) 24 VDC 7.5 A 90 % TEP 160–7216WIR 28 VDC 6.5 A 90 % TEP 160–7218WIR 48 VDC 3.8 A 90 % Options Heat-sink for standard version (incl. mounting screws and thermal pad) TEP-HS1 TEP-MK1 Din-rail mounting kit for chassis mount models (incl. mounting screws) TCK-xxx Common mode chokes for filter proposals to meet EN55022 class A/B --> see application note Models with 3.3 VDC/~ 40 A or 5.0 VDC/~ 30 A output Chassis mount models with screw terminal block on demand Chassis mount models with screw terminal block and input filter to meet EN 555022 class A Negative (passive = Off) Remote On/Off function (standard is passive = On) Sync pin to synchronize switching frequency of up to 3 units (EMC reason) http://www.tracopower.com Page 1 of 5 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEP160-WIRCM-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEP160-WIRCM SERIES DC/DC Converters 160 Watt High Density Brick DC-DC Converter TEP 160WIR Series 144 – 182 Watt Measures: 2.40 x 2.28 x 0.50” Input Specifications Input current at no load (nominal input voltage) 24 V models: 25 mA typ. 48 V models: 20 mA typ. 110 V models: 10 mA typ. Start-up voltage 24 V models: 9.0 VDC max. 48 V models: 18 VDC max. 110 V models: 43 VDC max. Under voltage shut down (lock-out circuit) 24 V models: 7.3 – 8.1 VDC 48 V models: 15.5 – 16.3 VDC 110 V models: 33.0 – 36.0 VDC Surge voltage (1 sec. max.) 24 V models: 50 VDC 48 V models: 100 VDC 110 V models: 185 VDC Conducted noise EN 55022 class A/B with external components see application note EMC immunity EN 50121-3-2 – ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV, perf. criteria A – Radiated immunity EN 61000-4-3, 20 V/m, perf. criteria A – Fast transient / surge (with external input capacitor) EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±2 kV perf. criteria A 24 / 48 V models: chemi-con KY 200 µF, 100 V, ESR 48 mOhm 110 V models: ruby-con BXF 100 µF, 250 V – Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Reverse voltage protection parallel diode Recommended input fuse (slow blow) 24 V models: 20 A 48 / 110 V models: 10 A Output Specifications Voltage set accuracy (at full load, nominal input) ±1 % Output voltage adjustment +10 % / –20 % by external resistor see application note Regulation – Input variation Vin min. to Vin max. 0.1 % max. – Load variation (0 – 100%) 0.1 % max. Temperature coefficient ±0.02 %/K Minimum load not required Remote sense 10 % max. of Vout nom. (trim up value to subtract) Ripple and noise (20 MHz Bandwidth) 12 / 15 VDC models: 100 mVp-p typ. 24 / 28 VDC models: 200 mVp-p typ. 48 VDC models: 300 mVp-p typ. Start up time (nominal Vin and constant resistive load) 75 ms typ. (at power On or remote On) Transient response (25% load step change) 250 µs typ. Output current limitation at 120 – 150 % of Iout max. Over voltage protection at 115 – 130 % of Vout nom. Short circuit protection indefinite, automatic recovery. http://www.tracopower.com Page 2 of 5 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEP160-WIRCM-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om DC/DC Converters TRACO POWER TEP 160WIR Series 144 – 182 Watt TEP160-WIRCM SERIES 160 Watt High Density Brick DC-DC Converter General Specifications Measures: 2.40 x 2.28 x 0.50” Temperature ranges – Operating –40°C to +75°C – Case temperature +115°C max. – Storage –55°C to +125°C Thermal impedance – without heat-sink 6.1°C/W – with heat-sink 5.1°C/W Power Derating depending on installation! – without heat-sink 1.5 %/K above +25°C – with heat-sink 1.5 %/K above +40°C – with iron base plate (19” x 3.5” x 0.063”) 1.8 %/K above +60°C please refer to application note for temperature measure point that should not exceed 115°C. Over temperature protection at +120°C Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F – Test conditions www.tracopower.com/products/mil810.pdf Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +70°C, ground benign) 350‘000 h Isolation voltage (60sec.) – Input/Output 2’250 VDC (basic insulation) – Input/Case 1’600 VDC Isolation capacitance – Input/Output 2500 pF max. Isolation resistance – Input/Output (500 VDC) >1 GOhm min. Switching frequency 250 kHz typ. (puls width modulation) Safety standards EN 50155, UL 60950-1, IEC/EN 60950-1 Safety approvals – UL/cUL www.ul.com -> certifications -> File e188913 – Railway www.tracopower.com/products/tep-coc.pdf Remote On/Off – positive logic (standard) – On: 3 to 12 VDC or open circuit – Off: 0 to 1.2 VDC or short circuit pin 1 and 3 – negative logic (option) – On: 0 to 1.2 VDC or short circuit pin 1 and 3 – Off: 3 to 12 VDC or open circuit – Off idle current: 3 mA Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU Application note: www.tracopower.com/products/tep160wir-application.pdf Max. capacitive load [µF] 12 VDC 15 VDC 24 VDC 28 VDC 48 VDC 24 VDC Input models 10‘000 6‘300 2‘500 1‘700 620 48 VDC Input models 10‘800 6‘600 2‘700 1‘900 660 110 VDC Input models 12‘500 8‘000 3‘100 2‘300 790 All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 5 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEP160-WIRCM-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TEP160-WIRCM SERIES 160 Watt High Density Brick DC-DC Converter DC/DC Converters Measures: 2.40 x 2.28 x 0.50” TEP 160WIR Series 144 – 182 Watt General Specifications Casing material metal Potting material silicone (UL94V-0 rated) Base material FR4 Dimensions TEP 160WIR module 4 x M3 THD Pin-Out (trough hole) Pin 1 5 1 – Vin 2 6 2 Case Bottom view 7 3 Remote On/Off 3 8 4 + Vin 5 – Vout 4 9 6 – Sense* 7 Trim 8 + Sense* 0.19 (4.8) 1.90 (48.26) 9 + Vout Weight: 105 g (3.70oz) *Sense line to be connected 2.28 (57.9) to the output either at the Pin diameter pin 5 & 9: 0.08 (2.0) module or at the load under Pin diameter other pins: 0.04 (1.0) regard of polarity. TEP-HS1 Heatsink (pictured with heatsink mounted) 2.28 (57.9) Order code: TEP-HS1 Includes heatsink with termal pad and mounting screws To order modules with mounted heatsink ask factory. Weight: 142 g (5.01oz) Top view (Heatsink + Converter) Dimensions in Inch, () = mm Tolerances ±0.02 (±0.5) Pin pich tolerances ±0.01 (±0.25) Mounting hole pich tolerances ±0.01 (±0.25) Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 4 of 5 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEP160-WIRCM-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 2.40 (61.0) 0.95 0.20 0.5 2.40 (61.0) (24.2) (5.1) (12.7) 0.45 0.023 2.00 (50.80) (11.4) (0.6) 0.30 (7.62) 0.70 (17.78) 1.00 (25.40) TRACO POWER TEP160-WIRCM SERIES DC/DC Converters 160 Watt High Density Brick DC-DC Converter TEP 160WIR Series 144 – 182 Watt Measures: 2.40 x 2.28 x 0.50” Options (on demand) Chassis mount models with screw terminal block Chassis mount models with screw terminal block and input filter to meet EN 555022 class A TEP-MK1 DIN-rail clip for chassis mount models 1.33(33.8) 1.53(38.8) 1.87(47.5) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. July 25. 2014 www.tracopower.com Page 5 of 5 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TEP160-WIRCM-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om