TRACO POWER TES2N-4822

Traco Power DC/DC Converters TES2N SERIES 2 Watt Wide 2:1 Input Range Power Supply TES 2N Series, 2 Watt Measures: 0.94 x 0.71 x 0.31” CB Features Scheme UL 60950-1 ◆ Low profile SMD-package ◆ Wide 2:1 input voltage range ◆ I/O isolation 1500 VDC ◆ Input filter meets EN55022, class A ◆ Operating temperature range –40°C to +85°C ◆ Short-circuit protection The TES-2N series is a family of high performance 2W DC/DC converter modules ◆ Qualified for leadfree reflow solder featuring wide 2:1 input voltage ranges. The 28 models come in a low profile SMD process according IPC J-STD-020D.1 2 package which requires just 3 cm space on the PCB. A high efficiency allows an ◆ Available in tape and reel package operating temperature range of –40°C to +85°C. A built-in EMI input filter complies ◆ Bears washing process with EN 55022, class A. Typical applications for these converters are battery ope- rated equipment, instrumentation, communication and industrial electronics, every- ◆ 3-year product warranty where where isolated, tightly regulated voltages are required. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 2N-0510 3.3 VDC 500 mA 70 % TES 2N-0511 5 VDC 400 mA 73 % TES 2N-0512 12VDC 165 mA 75 % 4.5 – 9.0 VDC TES 2N-0513 15 VDC 135 mA 73 % (nominal 5 VDC) TES 2N-0521 ± 5 VDC ±200 mA 64 % TES 2N-0522 ±12 VDC ±85 mA 69 % TES 2N-0523 ±15 VDC ±65 mA 71 % TES 2N-1210 3.3 VDC 500 mA 73 % TES 2N-1211 5 VDC 400 mA 77 % TES 2N-1212 12 VDC 165 mA 80 % 9 – 18 VDC TES 2N-1213 15 VDC 135 mA 80 % (nominal 12 VDC) TES 2N-1221 ±5 VDC ±200 mA 73 % TES 2N-1222 ±12 VDC ±85 mA 78 % TES 2N-1223 ±15 VDC ±65 mA 78 % TES 2N-2410 3.3 VDC 500 mA 72 % TES 2N-2411 5 VDC 400 mA 77 % TES 2N-2412 12 VDC 165 mA 80 % 18 – 36 VDC TES 2N-2413 15 VDC 135 mA 81 % (nominal 24 VDC) TES 2N-2421 ±5 VDC ±200 mA 74 % TES 2N-2422 ±12 VDC ±85 mA 78 % TES 2N-2423 ±15 VDC ±65 mA 80 % TES 2N-4810 3.3 VDC 500 mA 71 % TES 2N-4811 5 VDC 400 mA 73 % TES 2N-4812 12 VDC 165 mA 79 % 36 – 75 VDC TES 2N-4813 15 VDC 135 mA 79 % (nominal 48 VDC) TES 2N-4821 ± 5 VDC ±200 mA 71 % TES 2N-4822 ±12 VDC ±85 mA 77 % TES 2N-4823 ±15 VDC ±65 mA 77 % http://www.tracopower.com Page 1 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TES2N-power-supply.html h t t p: / / pow e r. sa ge r. c om Traco Power TES2N SERIES DC/DC Converters 2 Watt Wide 2:1 Input Range Power Supply TES 2N Series 2 Watt Measures: 0.94 x 0.71 x 0.31” Input Specifications Input current at full load (nominal input) 5 Vin models: 600 mA typ. 12 Vin models: 220 mA typ. 24 Vin models: 110 mA typ. 48 Vin models: 55 mA typ. Surge voltage (100 msec. max.) 5 Vin models: 11 V max. 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A Input fuse recommended, required for compliance with CB – recommended min. fuse rating 5 V models: 500 mA 12 V models: 200 mA Output Specifications Voltage set accuracy ±2 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 25 – 100 % 0.75 % max. dual output models: 2.0 % (balanced load) Ripple and noise (20 MHz Bandwidth) 50 mVpk-pk max. Temperature coefficient ±0.02 %/K Short circuit protection indefinite, automatic recovery Minimum load 25 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Capacitive load 3.3 VDC output models: 2200 µF max. 5 VDC output models: 1000 µF max. 12 VDC output models: 170 µF max. 15 VDC output models: 110 µF max. ±5 VDC output models: 470 µF max. ±12 VDC output models: 100 µF max. ±15 VDC output models: 47 µF max. General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperatures +90°C – Storage –50°C to +125°C Derating 3.5 %/K above +71°C Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1.0 Mio h Isolation voltage (60sec.) – Input/Output 1500 VDC Isolation capacitance – Input/Output 250 pF Isolation resistance – Input/Output (500 VDC) >1000 M Ohm Switching frequency 300 kHz (PFM) Safety standards UL 60950-1, IEC/EN 60950-1 Safety approvals and – CB certificate (IEC 60950-1) www.tracopower.com/products/tes2n-cb.pdf certifications – CSA (File No. 226037) http:directories.csa-international.org Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 2 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TES2N-power-supply.html h t t p: / / pow e r. sa ge r. c om Traco Power TES2N SERIES DC/DC Converters 2 Watt Wide 2:1 Input Range Power Supply TES 2N Series 2 Watt Measures: 0.94 x 0.71 x 0.31” Physical Specifications Casing material DAP (UL94V-0 rated) Weight 5.1 g (0.17oz) Moisture sensivity level (MSL) level 2 as per J-STD-020D.1 (to find at: www.jedec.org - free registration required) Washing process www.tracopower.com/products/smd-wash.pdf Packaging www.tracopower.com/products/tes2n-pack.pdf Soldering temperature max. 260°C / 10 sec. Application note: www.tracopower.com/products/tes2n-application.pdf Outline Dimensions 24.0 (0.94) 0 - 4° 0.15 1.0 (0.04) 16 10 9 Pin-Out top view Pin Single Dual 1 –Vin (GND) –Vin (GND) 17 8 7 No con. No con. 8 No con. Common 3.11 (0.12) 15.24 (0.60) 2.54 (0.10) 9 +Vout +Vout 10 –Vout –Vout 16 +Vin +Vin 1.4 (0.055) min. Solder Pad Dimension Dimensions in [mm], () = Inch Tolerances ±0.25 (±0.01) 3.11 (0.12) 15.24 (0.60) 2.54 (0.10) Pin pitch tolerances ±0.05 (±0.002) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. January 05. 2015 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TES2N-power-supply.html h t t p: / / pow e r. sa ge r. c om 13.7 (0.54) 0.25 (0.01) 18.1 (0.71) 8.0 (0.31) 2.8 13.7 (0.54) 2.8 (0.11) (0.11)