TRACO POWER TES3-4822

DC/DC Converters TRACO POWER TES3 SERIES TES 3 Series, 3 Watt 3 Watt Surface Mount DC-DC Converter Measures: 0.54 x 0.31 x 0.28” CB Scheme UL 60950-1 Features ◆ SMD package ◆ Wide 2:1 input voltage range ◆ I/O isolation 1500VDC ◆ Under voltage lockout ◆ Operating temp. range –40°C to +85°C ◆ Short circuit protection ◆ High accuracy of pin co-planarity ◆ Lead free design – RoHS compliant ◆ 3-years product warranty The TES-3 series is a family of high performance 3W dc-dc converter modules featuring wide 2:1 input voltage ranges. The 15 models come in a low profile SMD package with dimensions of 32.3 x 14.8 x 10.2 mm. A high efficiency allows an operating temperature range of –40°C to +85°C at full load. This product is qualified for soldering in a high temperature lead-free reflow solder process. Typical applications for the converters are battery operated equipment, instrumentation, communication and industrial electronics, everywhere where an isolated, tightly regulated voltage is required. Models Ordercode Input voltage range Output voltage Output current max. Efficiency typ. TES 3-1210 3.3 VDC 700 mA 75 % TES 3-1211 5 VDC 600 mA 79 % 9 – 18 VDC TES 3-1212 12 VDC 250 mA 82 % (12 VDC nominal) TES 3-1222 ±12 VDC ±125 mA 81 % TES 3-1223 ±15 VDC ±100 mA 81 % TES 3-2410 3.3 VDC 700 mA 76 % TES 3-2411 5 VDC 600 mA 80 % 18 – 36 VDC TES 3-2412 12 VDC 250 mA 83 % (24 VDC nominal) TES 3-2422 ±12 VDC ±125 mA 82 % TES 3-2423 ±15 VDC ±100 mA 82 % TES 3-4810 3.3 VDC 700 mA 76 % TES 3-4811 5 VDC 600 mA 80 % 36 – 75 VDC TES 3-4812 12 VDC 250 mA 83 % (48 VDC nominal) TES 3-4822 ±12 VDC ±125 mA 82 % TES 3-4823 ±15 VDC ±100 mA 82 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 1 of 4 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TES3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TES3 SERIES DC/DC Converters 3 Watt Surface Mount DC-DC Converter TES 3 Series 3 Watt Measures: 0.54 x 0.31 x 0.28” Input Specifications Input current no load / full load 12 Vin models: 20 mA / 300 mA typ. 24 Vin models: 5 mA / 150 mA typ. 48 Vin models: 3 mA / 75 mA typ. Start-up voltage / 12 Vin models: 6 VDC / 8 VDC typ. under voltage shut down 24 Vin models: 12 VDC / 16 VDC typ. 48 Vin models: 24 VDC / 32 VDC typ Surge voltage (1 sec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Reverse voltage protection 0.5 A max. Reflected input ripple current can be reduced by ext. 1–2.2 µF polyester film capacitor Input filter Pi filter Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.3 % max. – Load variation 10 – 100 % single output models: 1.0 % max. dual output models balanced load: 1.0 % max. dual output models unbalanced load: 2.0 % max. Ripple and noise 50 mVpk-pk max. Temperature coefficient ±0.02 %/°C Current limitation >110 % of Iout max., continuouse Short circuit protection hiccup mode, indefinite (no automatic recovery) Capacitive load – single output models 4700 µF – dual output models 180 µF General Specifications Temperature ranges – Operating –40°C to +85°C – Case temperature +100°C max. – Storage –40°C to +125°C Derating (convection cooling) 3.5 %/K above 70°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) >1‘000‘000 h Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacitance – Input/Output 65 pF typ. Isolation resistance – Input/Output >1‘000 Mohm Switching frequency 300 kHz typ. (frequency modulation PFM) Safety standards UL 60950-1, IEC/EN 60950-1 Safety approvals CSA File No. 226037 http://directories.csa-international.org All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TES3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TES3 SERIES DC/DC Converters 3 Watt Surface Mount DC-DC Converter TES 3 Series 3 Watt Measures: 0.54 x 0.31 x 0.28” Physical Specifications Casing material non conductive black plastic (UL 94V-0-rated) Package weight 6 g (0.21 oz) Lead-free reflow solder process as per J-STD-020D.1 (to find at: www.jedec.org - free registration required) Moisture sensivity level (MSL) level 2 as per J-STD-033B.1 (to find at: www.jedec.org - free registration required) Washing process www.tracopower.com/products/smd- wash.pdf Packaging www.tracopower.com/products/tes3-pack.pdf Outline Dimensions mm (inches) Seating 32.3 (1.272) Detail A S Plane 14.8 (0.583) 16.1 (0.634) 18.8 (0.740) 24 13 Pin-Out Pin Single Dual Top View 1 –Vin (GND) –Vin (GND) 2 –Vin (GND) –Vin (GND) 3 NC NC 1 12 10 NC Common 17.78 (0.7) 11 NC NC 2.16 2.54 1.0 (0.04) (0.085) (0.1) 12 NC –V Output 13 +V Output +V Output Detail A M10:1 14 NC NC 15 –V Output Common 22 NC NC +Vin (Vcc) +Vin (Vcc) 23 0.15 24 +Vin (Vcc) +Vin (Vcc) 1.3 (0.051) Dimensions in [mm], () = Inch Tolerances ±0.25 (±0.01) Pin pitch tolerances ±0.05 (±0.002) Specifications are subject to change without notice. It is r http://www.tracopow esponsibility of each customer to thor er.com oughly test each product and part number under their unique parameters and environments to ensure a product will work pr Page 3 o operly and r f 4 eliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TES3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 1.0 (0.04) 10.2 (0.402) 0.5 (0.02) 0.15 (0.006) TRACO POWER TES3 SERIES DC/DC Converters 3 Watt Surface Mount DC-DC Converter TES 3 Series 3 Watt Measures: 0.54 x 0.31 x 0.28” Solder Pad Dimensions mm (inches) 27.94 (1.1) 17.78 (0.7) 2.16 2.54 2.54 2.54 2.54 (0.085) (0.1) (0.1) (0.1) (0.1) 1 1.5 Min. (0.059 Min.) Dimensions in [mm], () = Inch Tolerances ±0.25 (±0.01) Pin pitch tolerances ±0.05 (±0.002) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. April 25. 2014 www.tracopower.com Page 4 of 4 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TES3-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 20.0 (0.787) 2.8 (0.11)