TRACO POWER TES3-4822WI

TRACO POWER DC/DC Converters TES3-WI SERIES 3 Watt Surface Mount DC-DC Converter TES 3WI Series, 3 Watt Measures: 1.27 x 0.58 x 0.40” UL 60950-1 Features pending ◆ Compact SMD package ◆ 33.4 x 18.8 mm footprint ◆ Ultra-wide 4:1 input voltage range ◆ I/O isolation 1500 VDC ◆ Operating temp. range –40°C to +71°C ◆ Short circuit protection ◆ Input filter to meet EN 55022, class A ◆ Remote On/Off ◆ High accuracy of pin co-planarity ◆ Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D ◆ Available in tape & reel package ◆ 3-year product warranty The TES-3WI series is a family of high performance 3W dc/dc-converter modules in a low profile SMD package with compact dimensions. The 14 modules feature ultra- wide 4:1 input ranges with tightly regulated output voltage. High efficiency allows an operating temperature range of –40°C to +71°C at full load. Further features are built-in EMI-filter to meet EN 55022 class A without external components and remote On/Off control. The products comply with IPC J-STD-020D and are qualified for high temperature lead-free reflow solder process. Models Ordercode Input voltage Output voltage Output current max. Efficiency typ. TES 3-2410WI 3.3 VDC 750 mA 75 % TES 3-2411WI 5 VDC 600 mA 79 % TES 3-2412WI 12 VDC 250 mA 81 % 9 – 36 VDC TES 3-2413WI 15 VDC 200 mA 81 % (nominal 24 VDC) TES 3-2421WI ±5 VDC ±300 mA 78 % TES 3-2422WI ±12 VDC ±125 mA 81 % TES 3-2423WI ±15 VDC ±100 mA 81 % 3.3 VDC 750 mA 76 % TES 3-4810WI TES 3-4811WI 5 VDC 600 mA 80 % TES 3-4812WI 12 VDC 250 mA 83 % 18 – 75 VDC TES 3-4813WI 15 VDC 200 mA 83 % (nominal 48 VDC) TES 3-4821WI ±5 VDC ±300 mA 80 % TES 3-4822WI ±12 VDC ±125 mA 83 % TES 3-4823WI ±15 VDC ±100 mA 83 % Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. http://www.tracopower.com Page 1 of 3 Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TES3-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TES3-WI SERIES DC/DC Converters 3 Watt Surface Mount DC-DC Converter TES 3WI Series 3 Watt Measures: 1.27 x 0.58 x 0.40” Input Specifications Input current (no load) 24 V models: 20 mA typ. 48 V models: 10 mA typ. Start-up voltage / under voltage shut down 24 V models: 8.5 VDC / 8 VDC typ. 48 V models: 17 VDC / 16 VDC typ Surge voltage (1 sec. max.) 24 V models: 50 V max. 48 V models: 100 V max. Reverse voltage protection 1.0 A max. Reflected input ripple current 24 V models: 10 mA typ. 48 V models: 5 mA typ. Input filter EN 55022 class A, FCC part 15, level A Output Specifications Voltage set accuracy ±1 % Regulation – Input variation Vin min. to Vin max. 0.5 % max. – Load variation 10 – 100 % single output models: 1.0 % max. dual output models balanced load: 2.0 % max. Minimum load 10 % of rated max current (operation at lower load condition is safe but a higher output ripple will be experienced) Temperature coefficient ±0.02 %/°C max. Ripple and noise 75 mVpk-pk max. Dynamic load response (25% load change) 6 % max. peak variation 500 µS max. response time Transient response (25% load step change) 200 µs typ. Current limitation >120 % of Iout max. Short circuit protection continuous, automatic recovery Capacitive load single output models: 3000 µF dual output models: ±180 µF Remote On/Off – On: 2.5 to 5.5 V or open circuit – Off: –0.7 to 0.8 V or short circuit pin 3 and pin 1/2 – Off idle current: 5 mA General Specifications Temperature ranges – Operating –40°C to +71°C – Case temperature +100°C max. – Storage –40°C to +125°C Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at+25°C, ground benign) >1‘000‘000 h Isolation voltage (60 sec.) – Input/Output 1‘500 VDC Isolation capacitance – Input/Output 500 pF max. Isolation resistance – Input/Output >1‘000 Mohm Switching frequency 300 kHz typ. (frequency modulation PFM) Safety standards UL 60950-1, IEC/EN 60950-1 Safety approvals CSA File No. 226037 http://directories.csa-international.org (entry pending) Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf – RoHS RoHS Directive 2011/65/EU All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TES3-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om TRACO POWER TES3-WI SERIES DC/DC Converters 3 Watt Surface Mount DC-DC Converter TES 3WI Series 3 Watt Measures: 1.27 x 0.58 x 0.40” Physical Specifications Casing material non conductive plastic (UL 94V-0 rated) Package weight 8.8 g (0.31oz) Lead-free reflow solder process as per J-STD-020D.1 (to find at: www.jedec.org - free registration required) Moisture sensivity level (MSL) level 2 as per J-STD-033B.1 (to find at: www.jedec.org - free registration required) Washing process www.tracopower.com/products/smd- wash.pdf Packaging www.tracopower.com/products/tes3wi-pack.pdf Outline Dimensions Seating 32.3 (1.272) Detail A S Plane 14.8 (0.583) 16.1 (0.634) Pin-Out 18.8 (0.740) Pin Single Dual 1 –Vin (GND) –Vin (GND) 2 –Vin (GND) –Vin (GND) 24 13 3 Remote On/Off Remote On/Off Detail A M10:1 10 No con. Common 11 No con. No con. Top View 12 No con. –V Output 0.15 13 +V Output +V Output 14 No con. No con. 1.3 (0.051) 1 12 15 –V Output Common 17.78 (0.7) 2.16 2.54 1.0 (0.04) 22 No con. No con. (0.085) (0.1) 23 +Vin (Vcc) +Vin (Vcc) 27.94 (1.1) 24 +Vin (Vcc) +Vin (Vcc) Solder Pad Dimension 2.16 2.54 2.54 17.78 (0.7) 2.54 2.54 (0.09) (0.1) (0.1) (0.1) (0.1) No con. = Pin to be isolated from circuitry 1 Dimensions in [mm], () = Inch Tolerances ±0.25 (±0.01) Pin pitch tolerances ±0.13 (±0.005) 1.5 min. (0.06) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com Rev. April 25. 2014 www.tracopower.com Page 3 of 3 Specifications are subject to change without notice. It is responsibility of each customer to thoroughly test each product and part number under their unique parameters and environments to ensure a product will work properly and reliably. Click below for more details, to buy on-line or request volume pricing: (866) 588-1750 power@sager .com http://power.sager.com/traco-power-TES3-WI-dc-dc-converter.html h t t p: / / pow e r. sa ge r. c om 1.0 (0.04) 10.2 (0.402) 0.5 (0.02) 20.0 (0.79) 2.8 (0.11) 0.15 (0.006)